Ascorbyl Palmitate Powder for Formulation and Bulk Sourcing

Ascorbyl palmitate powder with edible oil, softgel capsules and an E304 technical specification sheet
Table of Contents

Ascorbyl palmitate powder is a lipid-compatible vitamin C ester used primarily as an antioxidant in oils, fats, softgel fills, bakery fats, lipid premixes and selected emulsions. It is also known as L-ascorbyl palmitate, vitamin C palmitate, E304(i), INS 304 and CAS 137-66-6.

It is generally evaluated when oxidation occurs in a lipid phase where ordinary L-ascorbic acid is less practical. However, assay alone does not establish application suitability. Buyers must also consider carrier compatibility, incorporation behavior, crystallization, contaminants, regulatory requirements and finished-product stability.

Formulation and procurement teams can review the current bulk ascorbyl palmitate powder information before requesting specifications, documentation or a representative sample.

Ascorbyl Palmitate at a Glance

Buyer questionDirect answer
What is it?An ester formed from ascorbic acid and palmitic acid
Primary functionAntioxidant in lipid-containing systems
Common identifiersE304(i), INS 304 and CAS 137-66-6
Best-fit applicationsOils, softgel fills, bakery fats, lipid premixes and selected emulsions
Water solubilityVery limited
Main process riskIncomplete incorporation or crystallization after cooling
Key purchasing checksIdentity, assay, contaminants, particle properties and documentation
Commercial approvalRequires formulation and stability testing

The PubChem compound record identifies ascorbyl palmitate as C₂₂H₃₈O₇ with a molecular weight of approximately 414.5 g/mol. The U.S. Food and Drug Administration identifies its technical effect in food as an antioxidant.

What Is Ascorbyl Palmitate Powder?

Ascorbyl palmitate is produced by esterifying L-ascorbic acid with palmitic acid. The palmitate chain gives the molecule greater affinity for lipid-containing environments than standard water-soluble vitamin C.

Identity itemInformation
Common nameAscorbyl palmitate
Chemical referenceL-ascorbic acid 6-palmitate
Alternative nameVitamin C palmitate
E numberE304(i)
INS number304
CAS number137-66-6
Molecular formulaC₂₂H₃₈O₇
Typical appearanceWhite to yellowish-white powder
Main food functionAntioxidant

The expression fat-soluble vitamin C is commonly used, but it can oversimplify formulation behavior. Ascorbyl palmitate is not necessarily freely soluble in every vegetable oil, triglyceride carrier, cosmetic ester or softgel fill.

Practical performance depends on:

  • Carrier composition
  • Ingredient concentration
  • Process temperature
  • Mixing time and shear
  • Cooling rate
  • Storage temperature
  • Emulsifiers and other antioxidants

A mixture that appears clear during warm processing may develop haze, sediment or crystals after cooling. Compatibility must therefore be evaluated across the complete manufacturing and storage temperature range.

Ascorbyl Palmitate vs Ascorbic Acid: Which Should You Use?

Ascorbyl palmitate and L-ascorbic acid have different phase affinities and should not be substituted on a one-to-one basis.

Evaluation factorAscorbyl palmitateL-ascorbic acid
Relative phase affinityLipid-compatibleWater-compatible
Typical technical roleAntioxidant in fat-containing systemsVitamin source or antioxidant in aqueous systems
Water solubilityVery limitedHigh
Oil-system suitabilityMore practical, subject to testingGenerally limited
Main process concernIncorporation and crystallizationpH and water-phase oxidation
Direct substitutionNot recommendedNot recommended

L-ascorbic acid is generally more suitable for water-phase fortification. Ascorbyl palmitate is more relevant when the formulation challenge involves oils, fats or lipid interfaces.

Formulation conditionRecommended decision
Oxidation occurs mainly in oils or fatsEvaluate ascorbyl palmitate
The product contains omega-3 or other polyunsaturated oilsConduct comparative stability testing
Fat-soluble nutrients require protectionPotentially suitable
Tocopherols are already presentEvaluate as part of the antioxidant system
Rapid water dissolution is requiredSelect a water-compatible vitamin C form
Microbial preservation is requiredUse an appropriate preservative system
Incoming oil already has a high peroxide valueCorrect the raw-material issue first
Crystals form after coolingReformulate or evaluate another antioxidant

It should not be confused with other cosmetic vitamin C derivatives, which have different structures, solubility profiles and evidence requirements.

How Ascorbyl Palmitate Works in Lipid Systems

Lipid oxidation is a chain reaction accelerated by oxygen, light, heat, unsaturated fatty acids and transition metals such as iron and copper.

In finished products, oxidation may lead to:

  • Rancid flavor or odor
  • Peroxide formation
  • Color deterioration
  • Loss of sensitive nutrients
  • Texture or viscosity changes
  • Reduced shelf life
  • Rejected commercial batches

Ascorbyl palmitate can help interrupt oxidative reactions and may be used in systems containing tocopherols, phospholipids, chelators or other approved antioxidants.

Research published in the European Journal of Lipid Science and Technology indicates that its performance in vegetable oils can depend on the oil’s fatty-acid composition and endogenous tocopherol profile. This means results from one oil should not be converted directly into a universal addition rate for another formulation.

Why antioxidant location matters

Oxidation in bulk oil differs from oxidation in an emulsion. In an oil-in-water system, important reactions frequently occur near the oil-water interface, where oxygen, hydroperoxides, emulsifiers, metals and antioxidants interact.

A scientific review of antioxidant partitioning and interfacial behavior explains why molecular location can influence antioxidant efficiency. Results obtained in bulk oil cannot automatically be applied to a beverage emulsion, dressing, cream or other multiphase product.

Ascorbyl palmitate cannot compensate for unsuitable packaging, excessive oxygen exposure, poor-quality oil, uncontrolled metals or inadequate storage. It must be treated as one component of a complete oxidation-control strategy.

Applications and Formulation Control

Application matrix

ApplicationMain objectiveKey riskRecommended validation
Edible oilsDelay oxidative rancidityInitial peroxide load, oxygen and lightPeroxide value, p-anisidine value and sensory testing
Softgel fillsProtect oils and fat-soluble ingredientsCrystallization, sedimentation and encapsulation exposureHolding, encapsulation and real-time stability studies
Bakery fats and lipid premixesStabilize shortening, fillings, coatings and oil blendsHeat and uneven distributionPilot processing and storage testing
Oil-in-water emulsionsProtect dispersed lipidsInterface oxidation and metal catalysisEmulsion, chelator and packaging trials
Cosmetic or pharmaceutical systemsSupport product-specific stabilityHaze, tint, compendial or claim mismatchPhysical stability and product-specific review

Other antioxidant ingredients should be compared according to the formulation matrix, processing conditions, sensory requirements, regulatory position and total cost-in-use.

1. Screen the actual carrier

Test the powder in the exact oil, emulsifier or lipid carrier intended for commercial production.

Record:

  • Addition temperature
  • Mixing time
  • Mixing intensity
  • Time to visual clarity
  • Appearance after cooling
  • Sediment after holding
  • Crystal formation
  • Color or odor change

Testing only in a model oil may not predict behavior in the complete formula.

2. Define the addition sequence

A practical starting approach is to incorporate ascorbyl palmitate into a small portion of the lipid phase under controlled warming and mixing before adding it to the main batch.

The manufacturing procedure should define:

  • Order of addition
  • Temperature range
  • Mixing endpoint
  • Cooling rate
  • Maximum holding time
  • Oxygen- and light-control measures

For emulsions, adding the material to the oil phase before emulsification may reduce visible specks and uneven distribution compared with late post-addition.

3. Control heat, oxygen and metals

Increasing the antioxidant concentration may not solve oxidation caused by prolonged open-tank holding, excessive headspace oxygen, reactive metal contact, light-permeable packaging or unsuitable incoming oil.

Review the complete production system before changing the use level.

4. Validate at pilot scale

Relevant measurements may include:

  • Peroxide value
  • p-Anisidine value
  • Totox value
  • Headspace oxygen
  • Color
  • Odor and flavor
  • Active retention
  • Haze or sediment
  • Crystal formation
  • Accelerated and real-time stability

Laboratory antioxidant-capacity tests should not replace finished-product shelf-life studies.

Troubleshooting guide

ProblemLikely causeRecommended action
Powder does not incorporate completelyCarrier incompatibility, insufficient temperature or inadequate mixingCompare carriers and pre-dispersion procedures
Crystals or sediment appear after coolingReduced solubility or incomplete dissolutionReview concentration, carrier composition and cooling profile
Oxidation continuesOxygen, metals, packaging or poor incoming oilAudit the complete oxidation-control system
Pilot results differ from laboratory resultsChanges in shear, transfer time, holding or oxygen exposureReproduce commercial conditions during pilot work

Specification, COA and Regulatory Review

A purchasing specification should define the material clearly enough for QA release, supplier comparison and investigation of future batch changes.

Specification areaKey checks
IdentityIdentification, specific rotation and melting range
ContentAssay, acceptance range and reporting basis
Physical propertiesAppearance, particle size and incorporation behavior
Volatile and inorganic residueLoss on drying and residue on ignition
Process-related contaminantsResidual solvents
Toxic elementsLead, arsenic, cadmium and mercury
MicrobiologyRequirements based on the product and destination market

How to interpret the assay

A statement such as “98% purity” is not sufficient by itself. Buyers should confirm:

  • Applicable specification or monograph
  • Analytical method
  • Acceptance range
  • Dry-basis or as-is reporting
  • Batch number
  • Production date
  • Retest or expiry date
  • Product grade
  • Destination-market requirements

Food-additive specifications, FCC requirements, USP–NF monographs, European Pharmacopoeia requirements and customer purchasing specifications should not be assumed to be equivalent.

United States

The FDA Substances Added to Food inventory identifies ascorbyl palmitate’s technical effect as antioxidant.

Under 21 CFR 182.3149, ascorbyl palmitate is generally recognized as safe when used according to good manufacturing practice.

This does not establish unlimited use or automatically support a finished-product claim. The manufacturer remains responsible for lawful use, technical necessity and labeling.

European Union

The European Food Safety Authority evaluated ascorbyl palmitate as E304(i). Its scientific reassessment concluded that the evaluated food-additive uses did not raise a safety concern under the assessed conditions.

Buyers must still confirm the current Union List, permitted food category, use conditions and applicable purity requirements.

JECFA

In 2025, JECFA withdrew the earlier numerical acceptable daily intake and established a group ADI “not specified” for ascorbyl palmitate, ascorbyl stearate or their sum.

The current JECFA ascorbyl palmitate record notes rapid and extensive pre-systemic hydrolysis to ascorbic acid and palmitic acid.

A JECFA evaluation is an authoritative international safety reference. It does not replace national authorization, food-category restrictions or customer-specific compliance review.

Current Essencefield Supply Information

Essencefield’s product page publishes typical information for food, supplement and cosmetic applications. The exact specification must be reconfirmed for the quotation, production lot and destination market.

Supply itemPublished information
ProductAscorbyl Palmitate Powder
Chemical identityL-ascorbic acid 6-palmitate
CAS number137-66-6
Typical assay target95.0–100.5% on a dried basis, depending on the applicable specification
Typical particle size80 mesh; other requirements may be reviewed
Standard carrierNo standard diluent
Origin and manufactureChina
Published shelf life24 months unopened under stated storage conditions
Small packaging1 kg or 5 kg foil bag
Bulk packaging25 kg drum with foil liner
Typical MOQ25 kg; pilot quantities may be reviewed
Typical lead time7–15 working days, depending on testing, packaging and documents
Standard documentsCOA, TDS and SDS

These values are supplier-published reference information rather than universal contractual limits. The approved specification, quotation and batch-specific COA should control the purchasing decision.

Essencefield’s broader food additive supply services include specification review, samples, documentation, packaging information and bulk supply coordination.

For projects requiring expanded analytical review, testing, COA and certification support may include identity, assay, moisture, particle size, microbiology, contaminants and third-party laboratory coordination.

The scope of testing and certification depends on the specific ingredient, batch, production facility, product format and destination market. A report or certificate should not be treated as blanket evidence for every product.

Supplier Qualification and Commercial Approval

A bulk ascorbyl palmitate supplier should be assessed for product conformity, traceability, quality control and commercial reliability.

Product and source

Confirm:

  • Chemical identity
  • Grade
  • Manufacturing country
  • Actual production site
  • Applicable specification
  • Batch-coding system
  • Supplier’s role in the supply chain

Determine whether the seller is the manufacturer, distributor, sourcing company, trader or repacker.

Quality documents

Request the documents relevant to the project:

  • Current specification
  • Representative COA
  • Batch-specific COA
  • TDS
  • SDS
  • Residual-solvent statement
  • Toxic-element results
  • Allergen or GMO statements where applicable
  • Stability or retest information
  • Product- or facility-specific certificates

A useful COA should provide numerical results for critical parameters rather than listing every item only as “Pass.”

Change control

The quality agreement should address changes involving:

  • Manufacturing site
  • Raw-material source
  • Process solvents
  • Synthesis or purification route
  • Specification
  • Analytical method
  • Particle-size control
  • Packaging
  • Shelf life
  • Regulatory status

A material can remain within assay while changing in color, particle behavior, residual-solvent profile or incorporation performance.

Total cost-in-use

The lowest price per kilogram does not necessarily create the lowest finished-product cost.

Consider:

  • Assay-adjusted ingredient cost
  • Effective treatment level
  • Complementary antioxidants
  • Mixing and heating time
  • Testing and stability studies
  • Packaging, freight and inventory
  • Batch-failure and requalification risk
Evaluation categorySuggested weight
Specification compliance20%
Formulation performance20%
Regulatory suitability15%
Quality documentation15%
Supply reliability10%
Traceability and change control10%
Total cost-in-use10%

Weights should be adjusted according to the application and market risk.

Sample-to-commercial approval

A practical approval process contains five stages:

  1. Application and specification review: Define the carrier, product format, market, grade and required limits.
  2. Document and sample review: Assess the specification, COA, TDS, SDS, origin and packaging.
  3. Bench formulation: Test incorporation, crystallization, color, odor and initial oxidation performance.
  4. Pilot or commercial-lot verification: Reproduce scale-relevant mixing, transfer, holding, filling and packaging.
  5. Supplier approval: Finalize the specification, COA format, packaging, change control and repeat-order requirements.

Essencefield’s ingredient sourcing service supports specification comparison, document review, sample coordination, testing and bulk supply planning.

Request Specifications, Sample or Quote

Use the Essencefield contact page to provide:

  • Intended application
  • Carrier oil or formulation type
  • Destination market
  • Required grade or standard
  • Trial and estimated annual quantity
  • Packaging preference
  • Required tests and documents
  • Target delivery date

Essencefield lists info@essencefield.com for business inquiries.

A purchasing decision should be based on the approved specification, batch documentation, regulatory suitability, formulation performance, traceability and total cost-in-use.

Request a Manufacturing Quote

Please use the form below to share your ingredient requirements—product category, target application, desired specifications (e.g., assay/ratio, mesh size, carrier), and estimated order quantity. If you need OEM/private label, include dosage form and key label claims. We’ll route your request to the right team and recommend suitable ingredients, testing/documentation options, packaging, and lead times. You’ll receive indicative pricing, MOQ, and a sample/approval plan.

Picture of Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

We publish technical guides for B2B sourcing and formulation of botanical ingredients, including typical COA/Spec ranges, risk-based testing plans, documentation, and OEM/private-label manufacturing. Content is reviewed to align with manufacturing feasibility, batch traceability, and quality control practices used for global export projects.

Reviewed By: Essencefield QA & Technical Team (Quality System)

Documents (on request): COA · TDS/Spec · SDS · Allergen/GMO statements · Regulatory declarations (market-dependent)

More Posts