Calcium glycinate powder is a chelated mineral ingredient used in dietary supplements, premixes, capsules, tablets, sachets, gummies, chewables, and beverage powders. It may also be described as calcium bisglycinate or calcium amino acid chelate.
For B2B buyers, the ingredient name is only the starting point. Procurement and formulation teams must confirm the chemical form, elemental calcium content, powder properties, contaminant limits, documentation, application performance, and commercial supply terms.
Essencefield’s current Calcium Glycinate Powder product page lists a typical elemental calcium range of 18%–20%, along with defined particle-size, moisture, pH, bulk-density, microbiological, heavy-metal, packaging, MOQ, and lead-time references.
Calcium Glycinate Powder Specifications
| Purchasing parameter | Typical commercial reference |
|---|---|
| Product name | Calcium Glycinate Powder |
| Related names | Calcium bisglycinate; calcium amino acid chelate |
| Grade | Food grade / supplement grade |
| Elemental calcium | 18%–20% |
| Appearance | White to off-white fine powder |
| Particle size | 80–120 mesh |
| Loss on drying | ≤5.0% |
| pH | 6.0–8.0 at a defined 1% test concentration |
| Bulk density | 0.4–0.6 g/mL |
| Water behavior | Forms a dispersion or suspension |
| Shelf life | 24 months in unopened packaging |
| Standard packing | 25 kg fiber drum or 25 kg lined bag |
| Typical MOQ | 25–100 kg |
| Typical lead time | Approximately 7–15 days after order confirmation |
| Documents | Specification, batch COA, TDS, SDS, and agreed declarations |
| Samples | Available subject to specification and courier confirmation |
Specification note: Published values are typical purchasing references. Final limits, analytical methods, packaging, and acceptance criteria must follow the approved specification and batch-specific certificate of analysis.
Calcium Glycinate and Calcium Bisglycinate Grades
Calcium glycinate is produced by associating calcium with glycine, the simplest amino acid. Calcium bisglycinate generally describes calcium coordinated with two glycine-derived ligands.
The two names are often used interchangeably in commercial sourcing, but similarly named products may have different compositions.
| Grade type | Main procurement implication |
|---|---|
| Unbuffered calcium bisglycinate | Usually provides a more clearly defined calcium–glycine composition |
| Buffered calcium bisglycinate | May contain an additional calcium salt that increases total calcium |
| Standardized powder | May contain a carrier, stabilizer, or processing component |
| Micronized grade | Smaller particles may improve mouthfeel but reduce powder flow |
| Granulated grade | May improve handling, filling, or tablet compression |
Unbuffered commercial grades commonly provide approximately 18%–20% elemental calcium. Buffered products can show higher calcium values because another calcium source has been added.
A higher calcium percentage does not automatically mean that a product has a higher degree of chelation.
Before comparing quotations, buyers should confirm:
- Complete ingredient composition
- Elemental calcium reporting basis
- Calcium-to-glycine relationship
- Presence of additional calcium salts
- Carriers and processing aids
- Identity and assay methods
- Particle-size format
A product name, CAS number, or headline purity value should not replace review of the complete specification.
Specifications and COA Interpretation
A calcium glycinate specification should establish material identity, elemental calcium delivery, physical performance, contaminant controls, and test methods.
Core quality parameters
| Parameter | Typical reference | Main buyer check |
|---|---|---|
| Identification | Conforms to agreed method | Confirm that the method distinguishes the approved material |
| Elemental calcium | 18%–20% | Check whether the result is as-is or dry basis |
| Loss on drying | ≤5.0% | Review its effect on assay, stability, and powder flow |
| pH | 6.0–8.0 | Confirm concentration, solvent, and test method |
| Particle size | 80–120 mesh | Evaluate blending, filling, compression, and mouthfeel |
| Bulk density | 0.4–0.6 g/mL | Calculate capsule volume and packaging requirements |
| Water behavior | Dispersion or suspension | Test sedimentation in the complete formula |
| Total plate count | ≤1,000 CFU/g | Compare with customer and market limits |
| Yeast and mold | ≤100 CFU/g | Confirm method and sampling plan |
| Lead | ≤2 ppm | Review against destination-market requirements |
| Arsenic | ≤1 ppm | Determine whether additional speciation is required |
| Cadmium | ≤1 ppm | Review according to finished-product exposure |
| Mercury | ≤0.1 ppm | Confirm method and reporting limit |
The listed product reference also includes negative limits for E. coli, Salmonella, and Staphylococcus aureus under defined sample quantities. Tighter limits and additional testing should be agreed before production.
Compound assay is not elemental calcium
A common purchasing mistake is treating compound assay and elemental calcium as the same measurement.
A statement such as “98% assay” could refer to the purity of a calcium–glycine compound. It does not mean that the powder contains 98% calcium.
A usable batch COA should identify:
- Product name and code
- Batch or lot number
- Test parameter
- Acceptance limit
- Analytical method
- Actual result
- Reporting basis
- Specification version
- Release authorization
| COA entry | Buyer question | Warning sign |
|---|---|---|
| Assay ≥98% | What substance is being measured? | The analyte is not identified |
| Calcium 18%–20% | Is the result as-is or dry basis? | The reporting basis is absent |
| Loss on drying | Is moisture reflected in the assay? | No moisture result is shown |
| pH | At what concentration was it tested? | Test conditions are missing |
| Identification | Which analytical method is used? | Identity relies only on appearance |
| Solubility | Does it dissolve, disperse, or suspend? | Only “water-soluble” is stated |
| Heavy metals | Are individual metals reported? | The COA only says “complies” |
Essencefield’s published raw material quality process connects supplier qualification, specification confirmation, COA verification, incoming inspection, material release, and batch-level traceability.
Elemental Calcium, Dosage, and Landed Cost
Elemental calcium is the amount of calcium delivered by the ingredient. It is not the total weight of calcium glycinate powder added to the formula.
The calculation is:
Required powder weight = Target elemental calcium ÷ Elemental calcium fraction
For a grade containing 20% elemental calcium:
200 mg ÷ 0.20 = 1,000 mg calcium glycinate powder
Powder required by calcium concentration
| Target elemental calcium | 18% grade | 19% grade | 20% grade |
|---|---|---|---|
| 100 mg | 556 mg | 526 mg | 500 mg |
| 200 mg | 1,111 mg | 1,053 mg | 1,000 mg |
| 250 mg | 1,389 mg | 1,316 mg | 1,250 mg |
These calculations should be completed before deciding capsule size, tablet weight, serving count, or packaging format.
A product delivering 200 mg of elemental calcium may require approximately one gram of calcium glycinate powder. That loading can make a single-capsule format impractical.
Compare cost per kilogram of elemental calcium
Supplier prices should be normalized by nutrient delivery:
Cost per kilogram of elemental calcium = Powder price per kilogram ÷ Calcium fraction
Example:
- Grade A: $10.00/kg at 18% calcium
- Grade B: $10.70/kg at 20% calcium
The calculated costs are:
- Grade A: $55.56 per kg of elemental calcium
- Grade B: $53.50 per kg of elemental calcium
Grade B costs more per kilogram of powder but less per kilogram of delivered calcium.
A complete landed-cost comparison should also include freight, duties, testing, moisture, assay variation, production yield, MOQ, payment terms, and the cost of rejected batches.
Calcium Glycinate vs Calcium Carbonate and Citrate
The appropriate calcium form depends on nutrient density, dosage-form capacity, formulation behavior, evidence, positioning, and cost.
The NIH Office of Dietary Supplements calcium fact sheet states that calcium carbonate contains approximately 40% elemental calcium, while calcium citrate contains approximately 21%. The amount absorbed also depends on the calcium source and the total elemental calcium consumed at one time.
| Selection factor | Calcium glycinate | Calcium carbonate | Calcium citrate |
|---|---|---|---|
| Elemental calcium | Commonly around 18%–20% for the listed grade | Approximately 40% | Approximately 21% |
| Required ingredient mass | Relatively high | Lowest | Moderate to high |
| Typical positioning | Chelated premium mineral | Economical concentrated source | Established non-carbonate source |
| Water behavior | Grade- and formula-dependent | Low water solubility | Generally more soluble than carbonate |
| Capsule or tablet demand | Can require substantial space | More compact | Moderate |
| Typical raw-material cost | Higher | Lower | Moderate |
| Main buyer question | Identity and composition | Dose density and water behavior | Dose mass and formulation cost |
Choose calcium glycinate when chelated positioning and grade-specific formulation performance are priorities, calcium carbonate when maximum nutrient density is required, and calcium citrate when an established non-carbonate form is preferred.
Formulation Selection by Application
Powder performance should be evaluated in the complete formulation rather than inferred from assay or a plain-water test.
| Application | Primary requirement | Main evaluation |
|---|---|---|
| Capsules | Practical fill volume | Density, flow, capsule size, and serving count |
| Tablets | Reliable compression | Binder demand, hardness, friability, and disintegration |
| Powder blends | Uniform distribution | Particle-size and density matching |
| Sachets | Accurate filling | Flow, segregation, moisture, and dust |
| Beverage powders | Stable dispersion | Sedimentation, haze, grit, pH, and flavor |
| Gummies | Texture and sensory compatibility | Mineral taste, opacity, acid interaction, and water activity |
| Chewables | Mouthfeel and compression | Particle size, flavor masking, hardness, and disintegration |
Tablets and capsules
Capsule development should begin with the required elemental calcium and corresponding raw-material weight. Review loose and tapped density, powder flow, capsule capacity, segregation, moisture sensitivity, and fill-weight consistency.
Tablet trials should evaluate compressibility, binder and lubricant demand, die loading, hardness, friability, and disintegration.
A representative commercial-grade sample should be used. A laboratory sample with a different particle-size or density profile may not reproduce production performance.
Beverages and gummies
“Soluble,” “dispersible,” and “suspendable” do not describe the same behavior.
Beverage testing should define:
- Serving concentration
- Water temperature
- Mixing time
- Final pH
- Sedimentation period
- Haze and grittiness
- Flavor impact
- Interaction with proteins, acids, gums, and other minerals
Gummies require early evaluation of mineral taste, opacity, acid compatibility, processing temperature, gel texture, and water activity.
Projects requiring dosage-format selection or prototype work can continue through Essencefield’s custom formulation support, which covers ingredient selection, dosage planning, samples, and manufacturing feasibility.
Evidence Behind Bioavailability Claims
Calcium glycinate powder is frequently marketed as highly absorbable or superior to inorganic calcium sources. These claims should be assessed separately from product identity and calcium assay.
Chelation does not automatically establish clinical superiority.
A comparative claim should answer three questions:
- Was the exact commercial material tested?
- Were equivalent elemental calcium doses compared?
- Was the evidence obtained from a human study, animal study, or laboratory test?
Dissolution and simulated-digestion studies may help characterize material behavior, but they do not directly prove superior human outcomes.
EFSA evaluates nutrient sources used in food supplements, while the European Commission maintains the applicable lists of permitted vitamin and mineral substances. A safety or regulatory conclusion should not be presented as proof that every commercial calcium bisglycinate grade has superior absorption.
Regulatory and Document Review
Regulatory suitability depends on the destination country, product category, use level, target population, label format, and proposed claims.
| Market | Main buyer review |
|---|---|
| United States | Ingredient status, elemental-calcium declaration, source naming, Supplement Facts, and claims |
| European Union | Permitted calcium source, product category, national requirements, labeling, and claims |
| Other markets | Local ingredient permission, nutrient levels, contaminants, and registration documents |
United States
FDA dietary supplement labeling guidance distinguishes the dietary ingredient from its source. Calcium is declared by elemental weight in the Supplement Facts panel, while the source can be identified in parentheses, such as “Calcium (as calcium carbonate).”
The phrase “FDA approved” should not be used as a general statement for a dietary supplement raw material unless the exact legal status supports it.
European Union
EU legislation lists calcium bisglycinate among calcium sources that may be used in food supplements. Buyers must still review product category, national requirements, nutrient levels, purity, contaminants, labeling, and claims.
Permission as a mineral source does not automatically authorize every food application, dosage, population, or marketing statement.
Supplier document package
| Document | Primary purpose |
|---|---|
| Product specification | Defines agreed parameters, limits, and methods |
| Batch COA | Reports results for the commercial lot |
| TDS | Summarizes identity and technical properties |
| SDS | Supports handling, storage, and transport review |
| Compliance statements | Support allergen, GMO, origin, and market assessment |
| Third-party or facility documents | Support independent testing and site-specific certification review |
Essencefield’s testing and certification support states that available documents and certificates depend on the selected source, production facility, product category, and target market.
A certificate should be checked for the legal holder, production address, product scope, issuing organization, and validity period.
Supplier Approval and Bulk Supply
A practical supplier-approval sequence is:
Source review → Specification approval → Sample testing → Formula trial → Commercial-batch verification → Approved supply
Before approving a calcium glycinate supplier:
- Confirm the chemical identity and grade.
- Distinguish unbuffered, buffered, and standardized products.
- Approve the specification and analytical methods.
- Test a representative sample in the intended formula.
- Review recent batch COAs and applicable certificates.
- Verify the first commercial batch against the approved sample.
- Establish change control and batch traceability.
The current product page lists food-grade PE liners, 25 kg bulk packaging, a typical MOQ of 25–100 kg, and an approximate standard lead time of 7–15 days after order confirmation. Custom particle size, tighter calcium limits, expanded testing, or special packaging can change MOQ and delivery timing.
Essencefield’s global supply support covers pre-order document review, samples, packaging, shipment planning, and export documentation for international B2B projects.
Request a Specification, COA, and Sample
A complete inquiry should include:
- Target elemental calcium
- Intended application
- Dosage format
- Required specification
- Estimated quantity
- Destination country
- Testing requirements
- Required documents
- Packaging preference
- Expected delivery schedule
Use the Essencefield contact page to request the current calcium glycinate powder specification, recent batch COA, technical documents, sample terms, MOQ, lead time, and bulk quotation.
Select calcium glycinate powder by verified elemental calcium, defined composition, practical formulation performance, batch documentation, and landed cost—not by product name or headline assay alone.

















