Copper sulfate powder is a commercial description for finely divided copper(II) sulfate. Its most common commercial form is copper sulfate pentahydrate, a bright-blue crystalline material with the formula CuSO₄·5H₂O.
The product name alone does not define the hydration state, grade, particle size, elemental copper content, or impurity profile. Buyers should compare copper sulfate powder using an agreed numerical specification that covers identity, assay basis, elemental copper, moisture, water-insoluble matter, particle size, critical impurities, and batch documentation.
The PubChem copper sulfate pentahydrate record identifies the pentahydrate as a blue crystalline copper(II) sulfate hydrate. However, commercial powders may differ substantially in grade, granulation, additive system, and quality controls.
Copper Sulfate Powder at a Glance
| Parameter | Procurement information |
|---|---|
| Chemical name | Copper(II) sulfate or cupric sulfate |
| Alternative spelling | Copper sulphate |
| Common commercial form | Copper sulfate pentahydrate |
| Formula | CuSO₄·5H₂O |
| CAS number | 7758-99-8 |
| Typical appearance | Bright-blue crystals, granules, or milled powder |
| Key specifications | Assay, elemental copper, moisture, insoluble matter, particle size, and impurities |
| Core documents | Product specification, batch CoA, SDS, and TDS |
Terms such as “technical grade,” “agricultural grade,” or “high purity” do not represent universal specifications. Two products using the same grade name may have different limits for iron, lead, arsenic, chloride, moisture, or water-insoluble matter.
Commercial approval should therefore be based on numerical limits, suitable test methods, and a representative sample.
Pentahydrate vs. Anhydrous Copper Sulfate
Copper sulfate pentahydrate and anhydrous copper sulfate contain different amounts of structural water. This changes their molecular weight, theoretical copper content, appearance, and moisture behavior.
| Parameter | Copper sulfate pentahydrate | Anhydrous copper sulfate |
|---|---|---|
| Formula | CuSO₄·5H₂O | CuSO₄ |
| Common CAS number | 7758-99-8 | 7758-98-7 |
| Molecular weight | Approximately 249.68 g/mol | Approximately 159.61 g/mol |
| Typical appearance | Bright-blue crystalline material | White to gray-white powder |
| Theoretical copper content | Approximately 25.45% | Approximately 39.81% |
| Structural water | Five water molecules | None |
| Main handling issue | Hydration balance and free moisture | Rapid moisture absorption |
A quotation should clearly identify the hydrate, assay basis, and elemental copper value. Price per kilogram cannot be compared accurately when suppliers are offering different chemical forms.
The product name, formula, CAS number, CoA, SDS, label, commercial invoice, and purchase order should all describe the same material.
Which Copper Sulfate Specifications Matter Most?
The right specification depends on how the copper sulfate powder will be used. Each parameter should be connected to a process, safety, or compliance requirement.
| Parameter | Why it matters | Common verification |
|---|---|---|
| Chemical identity | Confirms the salt and hydration state | Identity test, spectroscopy, or crystallographic analysis |
| Salt assay | Measures the declared copper sulfate compound | Titration or approved compendial method |
| Elemental copper | Supports dosing and hydrate comparison | AAS, ICP-OES, or ICP-AES |
| Moisture | Affects active content, flow, and caking | Loss on drying or an agreed moisture method |
| Water-insoluble matter | Affects clarity, filtration, and equipment | Gravimetric filtration |
| Particle size | Affects dissolution, dusting, and feeding | Sieve analysis or laser diffraction |
| Trace metals | Affect compliance and process performance | AAS, ICP-OES, or ICP-MS |
| pH or acidity | May influence downstream formulations | Defined solution concentration and temperature |
| Solution appearance | Indicates sediment or contamination | Visual or instrumental assessment |
Assay and Elemental Copper
Salt assay and elemental copper are related but are not interchangeable.
A result may be reported as:
- Copper sulfate pentahydrate
- Anhydrous copper sulfate
- Elemental copper
- Dry basis
- As-received basis
Pure copper sulfate pentahydrate theoretically contains approximately 25.45% elemental copper. Actual commercial results should be interpreted together with moisture, hydration state, analytical method, and reporting basis.
A buyer should determine whether elemental copper was measured directly or calculated from the copper sulfate assay. Direct measurement may be preferable when copper contribution is a critical formulation or regulatory value.
Water-Insoluble Matter
Copper sulfate dissolves readily in water, but a commercial product may still contain insoluble residue.
Excessive insoluble matter can cause:
- Sediment in solution tanks
- Blocked nozzles or dosing equipment
- Increased filter loading
- Visible particles in finished formulations
- Electroplating-bath contamination
- Reduced usable active concentration
Clear-solution applications should include a numerical water-insoluble-matter limit and a repeatable filtration method. A general claim that the product is water-soluble does not provide sufficient control.
Particle-Size Distribution
Particle size affects dissolution, flowability, dust generation, blending, and automated feeding.
Fine copper sulfate powder may dissolve quickly but can produce more airborne dust, bridge in hoppers, absorb moisture, or create handling losses. Coarser material may flow more effectively but require longer dissolution or stronger agitation.
Particle size may be controlled through:
- Mesh range
- Sieve-retention limits
- Maximum oversize
- Maximum fines
- D10, D50, and D90 values
- A buyer-approved reference sample
The supplier should also disclose anti-caking or flow agents. These additives may improve handling but can affect solution clarity, filtration, and compatibility with sensitive processes.
Which Grade Fits Each Application?
Copper sulfate is used in fertilizers, animal nutrition, electroplating, mineral processing, chemical manufacturing, laboratory analysis, algae-control products, and other industrial systems.
The National Pesticide Information Center copper sulfate fact sheet describes pesticide-related uses while emphasizing that registered products must be used according to their approved labels.
| Intended use | Main qualification focus | Primary purchasing risk |
|---|---|---|
| Fertilizer formulation | Copper value, solubility, moisture, particle size, and contaminants | Uneven nutrient distribution or noncompliance |
| Feed premix | Authorized form, elemental copper, undesirable substances, and traceability | Regulatory failure or incorrect copper addition |
| Electroplating | Metallic impurities, chloride, acidity, insoluble matter, and bath testing | Deposit defects or bath contamination |
| Mining flotation | Assay, dissolution, granulation, consistency, and bulk availability | Variable activation performance |
| Chemical processing | Reaction-specific purity, acidity, and physical behavior | Yield, color, or reaction interference |
| Water-treatment products | Registered use, identity, granulation, water chemistry, and environmental controls | Misapplication or environmental harm |
| Laboratory analysis | Defined reagent standard and trace-metal profile | Analytical interference |
Regulated feed, fertilizer, pesticide, and algaecidal applications require market-specific authorization and product-level compliance. Technical-grade copper sulfate should not automatically be treated as suitable for a regulated use.
For example, Commission Implementing Regulation (EU) 2018/1039 authorizes specific copper compounds, including copper(II) sulfate pentahydrate, as feed additives under defined conditions. The chemical form, source, labeling, analytical controls, and conditions of use remain important parts of regulatory compliance.
How Should Buyers Review a Copper Sulfate CoA?
A certificate of analysis reports the test results for a specific batch. It should be reviewed against an approved product specification.
| Review point | Buyer question |
|---|---|
| Identity | Do the name, formula, CAS number, grade, and hydrate agree? |
| Reporting basis | Are the results reported on a dry or as-received basis? |
| Chemical consistency | Are assay, elemental copper, and moisture chemically plausible? |
| Critical impurities | Does the CoA include the parameters that matter for the application? |
| Test methods | Are the analytical methods and reporting limits suitable? |
| Traceability | Does the CoA lot number match the packaging and shipment documents? |
Confirm Product Identity
The CoA should identify the product name, hydration state, formula, CAS number, grade, product code, and lot number.
A mismatch between the product name, formula, and CAS number should be resolved before the material is approved.
Understand the Reporting Basis
Determine whether assay and elemental copper are expressed on a dry basis or as received. Confirm whether assay refers to the full copper sulfate salt or only elemental copper.
Without this information, apparently similar results may not be comparable.
Compare Assay, Copper, and Moisture
These values should be consistent with the declared hydrate.
Unexpected results may indicate:
- Excess free moisture
- A different hydration state
- Incorrect calculation
- Documentation copied from another grade
- Analytical or transcription error
Focus on Application-Critical Impurities
A feed-premix buyer may prioritize lead, arsenic, cadmium, mercury, and nickel. An electroplating buyer may focus on iron, chloride, acidity, insoluble matter, and solution clarity.
A long impurity list adds little value when it does not include the parameters that affect the buyer’s process.
Check Methods and Reporting Limits
The specification or CoA should identify suitable test methods for critical values.
For trace-metal results, buyers should review:
- Units
- Detection limits
- Reporting limits
- Sample preparation
- Analytical technique
- Method suitability for the agreed limit
Confirm Batch Traceability
The batch number on the CoA should match the packaging, invoice, packing list, and shipment records.
For repeat purchasing, reviewing several recent production lots provides a better view of manufacturing consistency than relying on one selected sample CoA.
How Essencefield Supports Supplier and Batch Qualification
Essencefield’s ingredient sourcing service begins with the buyer’s application, chemical form, specification, quantity, destination market, packaging, testing, and documentation requirements.
Supplier and Document Review
Potential sources can be screened through:
- Supplier identity and manufacturing-source review
- Product specification comparison
- Representative CoA review
- Available SDS and TDS evaluation
- Destination-market document requirements
- Packaging and supply capability
Essencefield’s published raw material quality process follows these stages:
Supplier Qualification → Specification Approval → CoA Review → Incoming Inspection → Material Release → Batch Traceability
The purpose of this workflow is to connect the approved source and specification to the sample and commercial batch being evaluated.
Sample Evaluation
A representative sample may be assessed for:
- Chemical identity
- Assay and elemental copper
- Moisture
- Water-insoluble matter
- Particle-size distribution
- Solution appearance
- Dissolution or filtration behavior
- Process-specific impurities
- Application performance
The sample should originate from the proposed commercial source. Changes in hydrate, manufacturing location, granulation, additive system, or production process should be evaluated before bulk approval.
Testing and Document Support
Essencefield’s testing and certification support includes coordination of specifications, CoAs, TDSs, SDSs, third-party test reports, and applicable facility- or product-specific documentation.
Third-party testing may be used for:
- Identity
- Salt assay
- Elemental copper
- Moisture
- Insoluble matter
- Particle size
- Heavy metals
- Buyer-defined parameters
A third-party report applies to the tested sample or batch. It should not be presented as evidence for material from a different source, production site, or specification.
Commercial Batch Control
Sample approval should lead to a signed commercial specification.
Each commercial shipment should then be reviewed through:
- Batch-specific CoA
- Agreed specification limits
- Packaging and label checks
- Shipment-document consistency
- Batch traceability
- Change notification where applicable
This approach reduces the risk that a successful laboratory sample will be followed by commercially different bulk material.
Packaging, Shipping, and Safety Controls
Packaging should protect copper sulfate powder from moisture, contamination, leakage, and uncontrolled release.
| Area | What buyers should confirm |
|---|---|
| Primary packaging | Liner, moisture barrier, closure, and contamination protection |
| Outer packaging | Bag, drum, or bulk-container strength |
| Identification | Product name, lot number, net weight, and shipping marks |
| Storage | Sealed, dry, ventilated, and SDS-compliant conditions |
| Shipping | Current classification, documents, carrier acceptance, and route requirements |
| Handling | Appropriate control of dust, eye contact, and skin exposure |
| Environment | Prevention of discharge to soil, drains, and natural water |
Essencefield’s global supply support covers specification-led packing, batch documentation, export paperwork, shipment handover, and repeat-order coordination.
The final packaging and shipping plan depends on the selected product form, quantity, destination, transport route, and current product-specific SDS.
Copper compounds require careful environmental control. The U.S. Environmental Protection Agency explains in its Aquatic Life Criteria for Copper that copper is an essential nutrient at low concentrations but can be toxic to aquatic organisms at higher exposure levels.
Copper sulfate should not be discharged into drains, soil, or natural water systems without appropriate authorization and controls.
Information Required for a Quotation
A complete inquiry allows potential sources to be compared on the same technical and commercial basis.
Provide:
- Application and destination market
- Required chemical form and grade
- Salt assay and elemental copper targets
- Critical impurity limits
- Moisture and water-insoluble-matter requirements
- Particle size and additive restrictions
- Trial quantity and estimated annual demand
- Preferred packaging
- Required documents and testing
- Delivery destination and target schedule
MOQ, sample availability, packaging, testing scope, lead time, and supporting documents can then be reviewed against the selected source and approved specification.
Submit the requirements through the Essencefield contact page to begin a specification and sourcing review.
Conclusion
Copper sulfate powder should be selected using chemical identity, numerical specifications, and batch evidence rather than product name or headline purity alone.
Buyers should confirm the hydration state, assay basis, elemental copper, moisture, insoluble matter, particle size, application-specific impurities, and CoA traceability. A representative sample and signed commercial specification provide the basis for bulk approval.
Essencefield’s sourcing, quality-review, testing, documentation, and global supply processes can support supplier qualification. Final product form, grade, specification, packaging, MOQ, lead time, and document scope depend on the approved source and project requirements.

















