Fumaric Acid Powder Specifications, Applications and Supplier Evaluation

White crystalline fumaric acid powder beside a COA, specification sheet, and dry beverage, confectionery, and bakery application samples.
Table of Contents

Fumaric acid powder is a crystalline organic acid used to regulate pH, shape sourness, and control acid–base reactions in dry beverage mixes, confectionery, tablets, gummies, seasoning blends, bakery premixes, and selected leavening systems.

Also known as trans-butenedioic acid, it is identified by CAS 110-17-8 and the food-additive number INS 297 or E297. Its key formulation characteristics are limited cold-water solubility, low moisture uptake, persistent acidity, and gradual dissolution.

Food-grade fumaric acid powder is generally best suited to dry or low-moisture formulations where controlled acid release and storage stability are useful. It requires closer validation in clear beverages, concentrated liquids, and products that must dissolve immediately in cold water.

For procurement teams, purity alone does not determine suitability. Assay basis, maleic acid, moisture, particle-size distribution, insoluble matter, regulatory requirements, and lot-to-lot consistency must also be evaluated.

Fumaric Acid Powder Quick Specification

Buyer review pointPractical requirement
Chemical identityFumaric acid / trans-butenedioic acid
CAS number110-17-8
Food-additive numberINS 297 / E297
Molecular formulaC₄H₄O₄
Primary functionAcidulant, acidity regulator, flavoring agent
Key physical propertyLimited cold-water solubility
Priority COA parametersAssay, maleic acid, moisture, sulfated ash and particle size
Application-sensitive controlsInsoluble matter, bulk density, neutralizing value and time-to-pH
Main sourcing decisionMatch the grade, assay basis and particle size to the process and destination market

The PubChem fumaric acid record identifies its molecular formula as C₄H₄O₄. The JECFA fumaric acid specification describes it as an odorless white crystalline powder or granules used as an acidity regulator and flavoring agent.

What Makes Fumaric Acid Powder Different?

Limited cold-water solubility

Fumaric acid is slightly soluble rather than freely soluble in water. This affects dissolution speed, pH development, sediment formation, and the time required for a product to reach equilibrium.

A finer powder generally dissolves faster because more particle surface is exposed to the liquid. However, reducing particle size does not convert fumaric acid into a highly soluble acid. Water temperature, agitation, concentration, buffering ingredients, and other acids in the formula continue to influence performance.

Formulators should distinguish among:

  • Solubility: the amount that can remain dissolved under defined conditions.
  • Dissolution rate: how quickly solid particles enter the liquid phase.
  • Dispersibility: how evenly particles spread before dissolving.
  • Particle-size distribution: the proportion of particles within defined size ranges.

These differences matter in commercial testing. A beverage powder that appears fully dispersed under laboratory high-shear mixing may leave sediment when stirred manually into cold water.

A supplier offering “cold-water-soluble fumaric acid” should disclose whether the product is untreated powder, a processed grade, or a premix containing carriers or processing aids.

Low moisture uptake

Fumaric acid powder is often evaluated for dry systems where moisture pickup, caking, and premature reaction with bicarbonates are concerns.

Its low hygroscopicity does not make the complete formulation moisture stable. Sweeteners, minerals, botanical extracts, flavors, and carriers may absorb considerably more moisture than the acid. Finished-product stability also depends on:

  • Water activity
  • Packaging barrier
  • Production-room humidity
  • Storage temperature
  • Shipping conditions
  • Open-bag handling

Moisture control is particularly important in effervescent and leavening products. Water ingress may initiate an acid–bicarbonate reaction before use, resulting in caking, carbon dioxide loss, package expansion, or reduced performance.

Persistent acidity

Gradual dissolution may create a longer-lasting sourness profile than a readily soluble acid. This can be useful in gummies, sour confectionery, chewable tablets, and selected powdered beverages.

Claims that fumaric acid is universally stronger than citric acid should be treated carefully. The word “stronger” may refer to:

  • Molar acid equivalents
  • Neutralizing value
  • Dosage required to reach a target pH
  • Titratable acidity
  • Initial sensory intensity
  • Sourness duration
  • Cost per unit of acidification

These are different measurements. A reliable substitution ratio must be established in the complete product matrix under defined processing and sensory conditions.

Neutralizing value in reactive systems

In formulations containing sodium bicarbonate, fumaric acid dosage should be calculated from acid–base requirements before sensory adjustments are made.

Neutralizing value helps estimate the amount of alkaline ingredient that can react with a defined quantity of acid. It does not predict dissolution speed, flavor intensity, or the desired residual pH.

Commercial development should also account for actual assay, other acids in the formula, bicarbonate concentration, reaction timing, moisture, and package stability.

Food-Grade Specifications and Regulatory Basis

Commercial limits, methods, documents, and supply options should be confirmed against the buyer-approved specification for the selected grade, manufacturing source, and destination market.

Assay and calculation basis

An assay result cannot be interpreted accurately unless its calculation basis is stated.

The JECFA specification requires fumaric acid to contain not less than 99.0% on the dried basis. For food use in the United States, 21 CFR 172.350 requires not less than 99.5% by weight on the anhydrous basis.

ReferenceAssay requirement
JECFA specificationNot less than 99.0% on the dried basis
U.S. 21 CFR 172.350Minimum 99.5% on the anhydrous basis
Commercial specificationMust identify the standard, method and calculation basis
Lot-specific COAShould report the actual result for the supplied batch

These figures should not be merged into a universal food-grade range. A material may meet one reference basis without the available documentation demonstrating compliance with another.

A purchasing specification should identify:

  • Minimum and maximum assay
  • Dry, dried, or anhydrous calculation basis
  • Analytical method
  • Applicable regulatory or compendial reference
  • Reporting precision
  • Procedure for investigating atypical results

Essencefield’s current fumaric acid powder specification and supply page describes commercial material commonly controlled around 99.0–100.5% on a dry basis. A U.S. food project should still use a specification and COA demonstrating the applicable minimum on the correct anhydrous basis.

Maleic acid

Maleic acid is the cis isomer of fumaric acid and a relevant process-related impurity. Its level provides information about conversion, purification, and manufacturing consistency.

The JECFA monograph specifies maleic acid at not more than 0.1%.

For supplier comparison and process trending, a numerical result is more useful than a COA entry that only states “conforms.” A series of results moving toward the acceptance limit may indicate process drift even while individual lots remain within specification.

Additional specification controls

ParameterReference or purchasing controlWhy it matters
Loss on dryingJECFA: not more than 0.5%Assay calculation, caking and premature reaction
Sulfated ashJECFA: not more than 0.1%Inorganic residue and process consistency
LeadJECFA: not more than 2 mg/kgContaminant and market compliance
Water-insoluble matterBuyer or project specificationSediment, clarity and filtration load
Particle-size distributionApplication-specificDissolution, flow, segregation and sensory release

Additional elemental limits may be required by the buyer’s risk assessment, customer standard, finished-product category, or destination market. A useful contaminant report should identify the individual element, numerical result, analytical method, reporting limit, batch, and testing laboratory.

Particle-size distribution

Particle-size distribution can have a greater effect on manufacturing performance than a small difference in chemical purity.

It influences:

  • Dissolution rate
  • Blend uniformity
  • Powder segregation
  • Flowability
  • Dust formation
  • Filling accuracy
  • Tablet compression
  • Particle mouthfeel
  • Sourness distribution
  • Acid–base reaction timing

Essencefield currently lists common 60–80 mesh, 80 mesh, fine-powder, and project-defined options for its food-grade fumaric acid powder.

Terms such as “fine powder” or “standard mesh” should not replace a numerical specification. The purchasing document should define the test method, screen sizes, percentage passing, sampling procedure, and acceptance tolerance.

E297 does not mean universal approval

E297 and INS 297 identify fumaric acid as a food additive, but they do not authorize every application or dosage in every market.

The finished-product manufacturer remains responsible for confirming:

  • Permitted food category
  • Applicable maximum use level or GMP condition
  • Purity criteria
  • Labeling requirements
  • Finished-product compliance
  • Supporting documentation

Projects intended for the European Union should verify the applicable Union requirements and consult relevant EFSA fumaric acid E297 notices during regulatory review.

How to Review a Fumaric Acid COA

A product specification defines the approved acceptance limits. A Certificate of Analysis reports results for an individual production batch.

A useful COA should identify:

  • Product name and grade
  • Batch or lot number
  • Manufacture or test date
  • Specification limits
  • Actual test results
  • Analytical methods where relevant
  • Release status
  • Authorized approval

Critical parameters such as assay, maleic acid, moisture, sulfated ash, particle size, and lead should preferably be reported numerically.

A result near a specification limit is not automatically a failure. The quality team should evaluate it against:

  • Historical lot data
  • Analytical uncertainty
  • Process capability
  • Application sensitivity
  • Finished-product risk

For example, moisture close to the acceptance limit may have little effect in a simple seasoning blend but may require closer review in an effervescent sachet. A wide particle-size distribution may be acceptable in a bakery premix but unsuitable for a chewable tablet where segregation and mouthfeel are critical.

Repeated numerical results also allow buyers to detect process drift. A single passing COA cannot show whether assay, moisture, or particle size has gradually changed across several production lots.

Essencefield’s published raw material quality process includes supplier qualification, specification confirmation, COA review, incoming inspection, and batch documentation.

Application-to-Specification Matrix

ApplicationPriority parametersMain risk to validate
Dry beverage powdersParticle size, insoluble matter and time-to-pHSediment or slow dissolution
Gummies and sour confectioneryParticle distribution and sensory releaseSour hotspots or gritty texture
TabletsFlow, bulk density, moisture and PSDSegregation, dusting or poor compression
Effervescent systemsMoisture, neutralizing value and PSDPremature reaction or inconsistent fizz
Bakery and tortillasNeutralizing value and reaction timingGas release at the wrong process stage
Seasoning blendsPSD compatibility and flowSegregation and localized acidity
Clear liquid systemsDissolution and insoluble matterHaze, sediment or filtration load

Dry beverage powders

Fumaric acid powder may fit beverage premixes when persistent sourness and dry-storage behavior are more important than instant dissolution.

Validation should reproduce consumer preparation conditions. Test the actual water volume, water temperature, normal stirring or shaking, time-to-pH, visible sediment, and flavor profile.

Where rapid dissolution and clarity are essential, anhydrous citric acid powder may provide a faster initial acid response. Blended acid systems can combine rapid front-end acidity with a more persistent finish.

Gummies and sour confectionery

In gummies, chewy sweets, and sour coatings, particle size affects both distribution and sensory intensity.

Fine fumaric acid powder may distribute more evenly but can increase dust and processing residue. Coarser particles can produce a stronger localized sour sensation but may cause gritty texture or uneven acidity.

Trials should focus on the addition stage, gel system, water activity, coating adhesion, moisture migration, sourness uniformity, and surface stability during storage.

Effervescent and bakery systems

In formulations containing bicarbonate, dosage should be based on acid–base requirements rather than sensory sourness alone.

Pilot testing should measure:

  • Gas-release profile
  • Time-to-fizz
  • Residual pH
  • Powder flow
  • Caking
  • Finished-product structure
  • Performance after storage

In bakery and tortilla systems, dissolution speed affects when acidity becomes available and when carbon dioxide is released. Particle size, moisture, neutralizing value, bicarbonate ratio, mixing sequence, and process temperature should therefore be evaluated together.

Fumaric Acid vs Other Acidulants

Selection factorFumaric acidCitric acidMalic acidTartaric acid
Cold-water dissolutionLimitedRapidRapidGenerally rapid
Acidity releaseGradual and persistentImmediate and brightSustained and fruit-likeSharp and dry
Dry-system suitabilityStrong where low moisture uptake mattersBroad application rangeBroad application rangeApplication dependent
Clear beverage suitabilityRequires close validationFrequently suitableFrequently suitableFormula dependent
Main purchasing controlPSD and dissolution behaviorHydration form and moistureGrade and sensory fitGrade, source and sensory fit
Main process riskSediment or delayed pHMoisture pickup in some systemsCost or flavor mismatchFlavor mismatch or availability

This table is a selection guide rather than a fixed substitution formula.

The most reliable comparison method is to prepare an acidification curve in the finished-product matrix. Each candidate acid should be evaluated for:

  • Dosage required to reach target pH
  • Equilibrium time
  • Titratable acidity
  • Sourness onset and duration
  • Sediment or clarity
  • Buffer and mineral interaction
  • Storage performance
  • Cost-in-use

Buyers comparing several options can review Essencefield’s broader food acidulant portfolio.

Supplier Qualification, Commercial Supply and Cost-in-Use

A useful supplier inquiry should define the technical requirement before asking for the lowest price.

Provide:

  • Intended application
  • Required grade
  • Destination market
  • Applicable standard
  • Assay basis
  • Maleic acid and moisture limits
  • Particle-size range
  • Annual demand
  • Packaging requirement
  • Documentation checklist
  • Sample-testing plan

The commercial seller, manufacturer, exporter, testing laboratory, and certificate holder may be different legal entities. Buyers should identify the actual manufacturing source and determine which party is responsible for batch release, testing, documentation, and change notification.

Important supplier-review questions include:

  • Is the manufacturing source fixed for repeat orders?
  • How are source or process changes communicated?
  • Which parameters are tested on every batch?
  • Are critical results reported numerically?
  • Can historical lot data be reviewed?
  • Are retained samples maintained?
  • Which certificates apply to the actual factory and product?
  • How are complaints and nonconforming lots handled?

Samples should represent the proposed commercial grade, source, and particle size. Approval of a finely milled laboratory sample does not qualify a coarser bulk grade.

Packaging and storage

Essencefield’s product information lists evaluation samples, food-grade PE inner liners, 25 kg bulk packaging, moisture-barrier options, and a typical unopened shelf life of 24 months.

Store the powder:

  • In sealed original packaging
  • In a cool, dry warehouse
  • Away from heat and strong odors
  • Protected from condensation
  • Separated from alkaline ingredients
  • Under first-in, first-out inventory control

Partial bags should be resealed promptly. Packaging barrier deserves particular attention for sea freight, humid destinations, and formulas containing bicarbonate.

Calculate cost-in-use

The lowest price per kilogram does not necessarily create the lowest manufacturing cost.

A starting calculation is:

Ingredient cost per metric ton of finished product = delivered price per kilogram × dosage in kilograms per metric ton

A complete comparison should also include:

  • Assay-adjusted dosage
  • Freight and import charges
  • MOQ
  • Packaging losses
  • Dissolution energy
  • Mixing time
  • Dust-control requirements
  • Production yield
  • Rework risk
  • Documentation workload
  • Batch consistency

A higher-priced grade may provide better total value when it offers tighter particle-size distribution, more predictable pH development, lower processing loss, and fewer production deviations.

Source Fumaric Acid Powder from Essencefield

Essencefield supports food, beverage, supplement, dry-mix, distributor, importer, and contract-manufacturing projects requiring food acidulants.

Its current fumaric acid powder supply page lists food-grade options, no carrier unless a custom premix is requested, common 60–80 mesh and 80 mesh formats, evaluation samples, 25 kg bulk packaging, and a typical 24-month unopened shelf life.

Depending on the selected source and project, supporting documents may include the approved specification, lot-specific COA, TDS, SDS, country-of-origin information, and relevant allergen or compliance statements.

For an accurate specification review and quotation, provide:

  1. Finished-product application
  2. Required grade and standard
  3. Destination country
  4. Assay basis and limits
  5. Maleic acid and moisture requirements
  6. Particle-size range
  7. Order quantity and annual forecast
  8. Packaging preference
  9. Required documents
  10. pH, dissolution, or bicarbonate-system requirements

Clear project information allows the proposed grade to be evaluated against the formulation, regulatory, quality, packaging, and logistics requirements before sample approval.

Conclusion

Fumaric acid powder is most valuable when limited solubility, persistent acidity, low moisture uptake, and controlled reaction timing match the product design.

A reliable purchasing decision should combine assay basis, maleic acid, moisture, particle-size distribution, COA data, application testing, supplier traceability, packaging, and cost-in-use. Defining these requirements before approval reduces sediment, inconsistent acidity, premature reaction, and documentation risk.

Request a Manufacturing Quote

Please use the form below to share your ingredient requirements—product category, target application, desired specifications (e.g., assay/ratio, mesh size, carrier), and estimated order quantity. If you need OEM/private label, include dosage form and key label claims. We’ll route your request to the right team and recommend suitable ingredients, testing/documentation options, packaging, and lead times. You’ll receive indicative pricing, MOQ, and a sample/approval plan.

Picture of Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

We publish technical guides for B2B sourcing and formulation of botanical ingredients, including typical COA/Spec ranges, risk-based testing plans, documentation, and OEM/private-label manufacturing. Content is reviewed to align with manufacturing feasibility, batch traceability, and quality control practices used for global export projects.

Reviewed By: Essencefield QA & Technical Team (Quality System)

Documents (on request): COA · TDS/Spec · SDS · Allergen/GMO statements · Regulatory declarations (market-dependent)

More Posts