

Anhydrous Citric Acid Powder is a water-free crystalline acidulant chosen when low moisture contribution and fast sour impact are formulation priorities. It provides clean citrus acidity and dry powder compatibility for instant beverages, effervescent-style blends, gummies and confectionery, supporting pH adjustment, sour taste balance and storage stability in moisture-sensitive dry mix systems at commercial scale and routine blending, packaging and storage.
| Item | Typical B2B Specification |
|---|---|
| Product name | Anhydrous Citric Acid Powder |
| Chemical name | Citric acid, anhydrous |
| Common reference names | Citric acid anhydrous, E330, water-free citric acid |
| CAS No. | 77-92-9 |
| Molecular formula | C₆H₈O₇ |
| Molecular weight | 192.12 g/mol |
| Ingredient category | Food additive, acidulant, acidity regulator, pH adjustment ingredient |
| Source or raw material origin | Fermentation-derived from carbohydrate feedstock; non-animal origin supply route available |
| Manufacturing process | Fermentation, purification, crystallization, drying, sieving, and controlled packing |
| Standard specification | Food-grade Anhydrous Citric Acid Powder; compendial-aligned or customer-specific limits can be confirmed by project |
| Assay / purity | Typically 99.5–100.5% on anhydrous basis, according to agreed specification |
| Grade options | Food grade; project-specific quality limits available for beverage, supplement, confectionery, and dry blend applications |
| Appearance | White crystalline powder or crystals, visually free from foreign matter |
| Odor and taste | Characteristic clean acidic profile; no abnormal odor |
| Carrier | No carrier normally used |
| Particle size | Granular and fine mesh options available according to dissolution, dusting, flowability, and filling requirements |
| Solubility | Readily soluble in water; dissolution rate depends on particle size, temperature, agitation, and formula matrix |
| pH behavior | Acidic in aqueous solution; final pH depends on dosage, buffering salts, minerals, sweeteners, and processing water |
| Water / loss on drying | Low-moisture anhydrous grade; tighter moisture or water activity limits can be agreed for effervescent and dry powder systems |
| Residue on ignition / ash | Controlled according to agreed specification |
| Insoluble matter | Available as a control point for clear beverage, gummy, RTD, and low-grit powder applications |
| Clarity of solution | Available when required for beverage powders, RTD drinks, syrups, gummies, and clear liquid systems |
| Color of solution | Available according to agreed specification for clear or light-color formulas |
| Bulk density and flowability | Mesh-dependent; granular grades generally provide better flow and lower dusting than very fine grades |
| Stability profile | Sensitive to humidity pickup; moisture control is important for caking prevention and effervescent compatibility |
| Heavy metals | Tested according to agreed specification and destination market requirements |
| Microbiology | Tested according to agreed specification; purified acidulant grades generally require low microbial risk control |
| Application compatibility | Capsules, tablets, chewables, powder blends, stick packs, sachets, gummies, confectionery, beverage powders, RTD drinks, and private label supplements |
| Shelf life | Typically 24–36 months unopened when stored sealed in cool, dry conditions; confirmed by batch and packaging format |
| Origin and manufacture | China origin and manufacture available; supply route confirmed by order |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related documents |
| Physical & Chemical Item | Typical Limit or Control Approach |
|---|---|
| Appearance | White crystalline powder or crystals |
| Identification | Confirmed by suitable chemical identity method, such as FTIR, titration, or agreed compendial identity test |
| Assay | Typically 99.5–100.5% as C₆H₈O₇ on anhydrous basis, grade dependent |
| Water / loss on drying | Controlled at low level for anhydrous grade; tighter limits available for humidity-sensitive projects |
| Water activity | Available when required for effervescent tablets, stick packs, sachets, or long-distance shipping projects |
| Residue on ignition / sulfated ash | Tested according to agreed specification |
| Clarity of solution | Available when required for clear beverage, RTD, syrup, gummy, and liquid concentrate applications |
| Color of solution | Available according to agreed specification for clear or light-color formulas |
| Insoluble matter | Controlled according to intended application and buyer specification |
| Readily carbonizable substances | Available when required by agreed quality standard or customer checklist |
| Oxalate | Available according to agreed grade or compendial-aligned specification |
| Sulfate | Available when required for formula compatibility, taste neutrality, or QA release |
| Chloride | Available when required for clear, low-impurity, or corrosion-sensitive applications |
| Calcium | Available when required for beverage clarity or mineral-interaction review |
| Iron | Optional tighter monitoring available for color-sensitive or oxidation-sensitive formulas |
| Heavy metals total | Tested according to agreed specification and destination market requirements |
| Particle size / mesh | Tested by sieve or agreed particle size method according to selected grade |
| Bulk density | Available when required for filling, sachet dosing, or tablet blend evaluation |
| pH of solution | Reported when required for formulation development or incoming QC comparison |
| Residual solvents | Not normally expected for standard fermentation and crystallization route; tested when required by project |
| Pesticide residues | Not a routine priority for purified fermentation acidulant grades; available when required by buyer checklist or destination market |
| Microbiology Item | Typical Limit |
|---|---|
| Total plate count | Typically ≤1,000 CFU/g or according to agreed specification |
| Yeast and mold | Typically ≤100 CFU/g or according to agreed specification |
| Coliforms | Controlled according to agreed specification |
| E. coli | Negative in agreed test amount |
| Salmonella | Negative in agreed test amount |
| Staphylococcus aureus | Available when required by customer specification |
| Heavy Metals Item | Typical Control Approach |
|---|---|
| Lead | Tested according to agreed specification and destination market requirements |
| Arsenic | Tested according to agreed specification and destination market requirements |
| Cadmium | Tested according to agreed specification and destination market requirements |
| Mercury | Tested according to agreed specification and destination market requirements |
| Iron / copper | Optional monitoring available for delicate flavor, light-color, or oxidation-sensitive formulas |
Each batch may be reviewed against the agreed specification before release, with attention to identity, source confirmation, assay, water or loss on drying, appearance, odor, particle size, residue on ignition, insoluble matter, microbiology, and heavy metals. For anhydrous grades, moisture-related indicators are especially important because humidity pickup can affect caking, flowability, blend uniformity, and effervescent reaction stability. COA consistency is checked against internal records and buyer requirements, while retained samples support later comparison if customers need batch-to-batch investigation. For applications such as clear beverages, gummies, sachets, and effervescent tablets, additional review may include water activity, clarity of solution, color of solution, trace iron, trace copper, chloride, sulfate, oxalate, and packaging integrity. Final release should match the intended application, not only the chemical assay.
Food-grade Anhydrous Citric Acid Powder gives formulators a water-free acidulant option where moisture management, pH precision, and dry-system stability are more important than general acidity alone. The anhydrous form is commonly selected when a formula contains bicarbonates, hygroscopic powders, minerals, sweeteners, flavors, or moisture-sensitive actives that require controlled handling during blending, filling, shipping, and storage.
| Format | Practical Formulation Guidance |
|---|---|
| Capsules | Used when acidity, pH adjustment, or ingredient interaction management is required in dry blends. Flowability and blend uniformity should be checked, especially when combined with fine minerals, hygroscopic extracts, or low-dose actives. |
| Tablets | Commonly evaluated for compressed tablets and chewable tablets. Granular grades may support better flow, while fine grades may require glidants or granulation support. Compression behavior should be tested with the complete excipient system. |
| Powder blends | Suitable for instant drink powders, nutritional premixes, and dry functional blends. Prototype inclusion often starts around 0.1–1.0%, depending on target acidity, sweetness level, flavor system, and reconstitution volume. |
| Stick packs and sachets | Moisture control, PSD matching, and packaging barrier are important. Granular citric acid often helps reduce fines migration and localized sour spots during transport vibration. |
| Beverage powders | Readily soluble and useful for pH adjustment and tartness profile. Finer mesh improves dissolution but may increase dusting and static during production. |
| Gummies and confectionery | Commonly evaluated for acidity adjustment and sour profile. Prototype inclusion may range from about 0.3–1.5%, depending on gel system, flavor, sweetness, and final pH target. |
| RTD drinks | Can be used for pH adjustment after hydration and before final processing. Clear drink projects should pay closer attention to insoluble matter, clarity of solution, and trace metal limits. |
| Private label supplement projects | Suitable for capsule, tablet, powder, sachet, gummy, and beverage applications where supplier documents, custom specifications, and repeatable batch release are required. |
| Format | Why Extra Testing Is Recommended |
|---|---|
| Effervescent tablets and sachets | Moisture, water activity, particle size, bicarbonate ratio, and packaging barrier must be validated to reduce premature reaction and CO₂ loss. |
| Mineral-fortified beverages | Citric acid can interact with calcium, magnesium, iron, and zinc systems. Haze, precipitation, taste shift, and pH drift should be tested during storage. |
| Protein beverages | Low pH may affect protein hydration, viscosity, or stability. Addition sequence and buffer design should be evaluated before scale-up. |
| Low-flavor formulas | Residue, chloride, sulfate, oxalate, and trace metals may influence taste perception. Tighter impurity limits may be requested for delicate flavors. |
| High-humidity markets | Long ocean transit and warehouse humidity can increase caking risk. Barrier packaging, desiccant strategy, and water activity monitoring may be required. |
| Item | Standard B2B Handling Approach |
|---|---|
| Sample packing | Small samples packed in sealed food-grade bags or bottles for evaluation; sample size confirmed by project |
| Bulk inner packing | Food-grade PE liner, double liner, or moisture-barrier liner depending on humidity sensitivity |
| Bulk outer packing | Commonly 25 kg kraft bag or carton; big bag options can be discussed for bulk industrial use |
| Label information | Product name, batch number, net weight, production date, shelf life, storage conditions, and origin details as agreed |
| Palletization | Export pallets with stretch wrap and protective handling; pallet format confirmed by shipping route |
| Shelf life | Typically 24–36 months unopened under recommended storage conditions |
| Storage conditions | Store sealed in a cool, dry, odor-free warehouse away from humidity and condensation |
| Humidity control | Critical for anhydrous grades, especially for effervescent, sachet, and dry blend applications |
| Temperature control | Avoid rapid temperature swings that may cause condensation inside bags or containers |
| Shipping options | Air, sea, express sample shipment, or consolidated container shipment according to order size |
| Export documents | Commercial invoice, packing list, COA, SDS, origin statement, and other buyer-requested documents |
| Long-distance shipping | Moisture-barrier packaging, pallet protection, and container dryness should be evaluated for humid routes |
| Handling after opening | Reseal immediately, avoid open exposure, use clean dry scoops, and prevent contact with high-humidity processing areas |
Standard MOQ for Anhydrous Citric Acid Powder depends on grade, particle size, packaging, and document requirements. Trial quantities can usually be discussed for formula evaluation, while bulk supply is available for supplement brands, distributors, private label companies, and contract manufacturers requiring repeatable quality and supplier approval support.
| Item | B2B Supply Information |
|---|---|
| Standard MOQ | Confirmed by grade and packaging; trial orders and bulk quantities available by project |
| Sample policy | Samples available for formulation testing, incoming QC review, and supplier evaluation |
| Standard lead time | Commonly 7–15 business days for regular stock or standard specifications, subject to confirmation |
| Custom specification lead time | Extended timing may apply for custom mesh, tighter moisture, water activity testing, additional metals, or special documents |
| Bulk supply support | Recurring production and export supply can be arranged according to forecast and shipment plan |
| Custom manufacturing support | Particle size selection, moisture control, specification alignment, and project-specific testing available |
| OEM / private label support | Suitable for capsule, tablet, powder, gummy, sachet, chewable, beverage powder, and RTD supplement projects |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related declarations |
| Testing support | Assay, identity, moisture, water activity, particle size, residue on ignition, insoluble matter, clarity of solution, microbiology, heavy metals, and optional project-specific tests |
| Buyer information needed | Target specification, application format, annual demand, order quantity, destination market, packaging preference, and document checklist |
For quotation and technical evaluation, buyers should provide the target specification, application format, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline. This allows the technical sales, QA, and supply teams to align the correct grade, particle size, COA items, lead time, and export documentation before confirming bulk supply.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.