Beef Bone Collagen Peptides Powder

Beef Bone Collagen Peptides Powder is produced from food-grade bovine bone collagen through enzymatic hydrolysis, filtration, concentration, spray drying, and sieving. The standard grade typically provides ≥90% protein on a dry basis for beverage powders, sachets, capsules, tablets, gummies, nutrition bars, and multi-ingredient supplement blends. Bulk supply supports specification review, samples, batch COA, animal-origin documentation, BSE/TSE statements, optional analytical testing, export packing, and traceable commercial orders.

Top Key Specs

ItemTypical B2B Specification
SourceFood-grade bovine bone collagen
ProcessingEnzymatic hydrolysis, filtration, concentration, spray drying, sieving, and metal detection
GradeFood or supplement ingredient grade
Protein≥90% on a dry basis for the standard grade
AppearanceOff-white to light yellow fine powder
Odor and TasteCharacteristic mild protein odor and taste
CarrierTypically carrier-free unless blending or instantization is requested
Particle Size80 mesh standard; custom particle size available by project
MoistureTypically ≤6.0%
DispersibilityWater-dispersible under suitable concentration, temperature, agitation, and pH conditions
Shelf LifeTypically 24 months in unopened original packaging
StorageStore sealed in a cool, dry place away from humidity, heat, sunlight, and strong odors
Animal-Origin DocumentationAnimal-origin declaration and BSE/TSE statement available

Supplier qualification should begin with the signed specification rather than a general product description. Buyers should confirm the bovine bone source, hydrolysis process, protein calculation basis, moisture, particle size, microbiological criteria, heavy-metal limits, traceability records, and document requirements. Routine batch-release tests should be separated from periodic monitoring and optional analyses so QA teams understand which results appear on each COA.

Protein content alone does not determine manufacturing suitability. Flavor, dispersibility, bulk density, powder flow, dust generation, moisture sensitivity, and batch consistency can affect processing and finished-product quality. Samples should therefore be evaluated under the intended formulation, equipment, serving concentration, and storage conditions before commercial approval. Essencefield’s raw-material quality process covers supplier qualification, specification confirmation, COA review, incoming inspection, batch documentation, and material traceability. Final methods, limits, testing frequency, and document scope are confirmed in the signed commercial specification.

Typical COA Limits

Physical and Chemical Controls

TestTypical Limit or Control
AppearanceOff-white to light yellow fine powder
Odor and TasteCharacteristic, without abnormal odor or taste
IdentificationConforms to the approved collagen or protein identity method
Protein≥90% on a dry basis for the standard grade
Moisture / Loss on Drying≤6.0%
AshAccording to the approved specification
pHAccording to the approved aqueous test method
Particle Size80 mesh standard or agreed project target

Heavy Metals

TestTypical Limit
Lead≤0.5 ppm
Arsenic≤0.5 ppm
Cadmium≤0.5 ppm
Mercury≤0.1 ppm
Total Heavy Metals≤10 ppm or according to the approved specification

Microbiological Limits

TestTypical Limit
Total Plate Count≤10,000 CFU/g
Yeast and Mold≤100 CFU/g
Escherichia coliNegative / 10 g
SalmonellaNegative / 25 g
Staphylococcus aureusNegative / 1 g

Optional Product-Specific Controls

Optional TestProcurement or Application Purpose
HydroxyprolineSupports collagen identity and lot comparison
Amino Acid ProfileReviews the characteristic collagen amino acid pattern
Molecular Weight DistributionSupports peptide consistency, mouthfeel, and dispersibility evaluation
Water ActivityAssesses caking and dry-storage risk
Bulk DensitySupports capsule filling, sachet dosing, and packing-line setup
Third-Party TestingSupports independent verification or destination-market requirements

Each specification should identify the analytical method, limit, reporting unit, and test frequency. Routine results may be reported as actual values or as “Conforms,” while periodic monitoring and optional third-party analyses should be identified separately.

Molecular weight results should include the test method and distribution profile rather than only an isolated average value. Hydroxyproline and amino acid data can support collagen identity, but they do not replace source traceability, microbiological testing, heavy-metal controls, or animal-origin documentation. Optional reports apply to the submitted sample or production batch and should be agreed before sample approval or order confirmation.

Features & Benefits

  • Defined bovine bone source: Supports projects requiring bone-derived collagen rather than bovine hide or marine collagen.
  • Protein-controlled grade: The standard ≥90% dry-basis specification provides a clear basis for supplier comparison.
  • Carrier-free standard option: Helps maintain protein contribution unless blending or instantization is required.
  • Application-specific testing: Molecular weight distribution, water activity, bulk density, and sensory checks support project qualification.
  • Batch and traceability documents: COA, specification, origin, animal-source, allergen, GMO, gluten, irradiation, and BSE/TSE statements support QA review.
  • Flexible bulk supply: Samples, trial quantities, custom specifications, additional testing, and repeat commercial orders can be coordinated.

The ingredient should be selected according to both analytical compliance and finished-product performance. Beverage and sachet projects typically prioritize flavor, reconstitution, foam, sediment, flow, and filling accuracy. Capsules depend on bulk density and achievable fill weight, while tablets require compression and disintegration trials. Gummies and nutrition bars need additional heat, texture, moisture, and shelf-life validation.

Qualified production resources and documentation are coordinated according to the approved specification, dosage format, destination market, and order scope. Facility-specific certifications are confirmed separately and should not be treated as automatic product-level approvals.

Applications & Formulation Ideas

Application and Specification Matching

ApplicationKey Parameters to Confirm
Beverage PowdersDispersibility, reconstitution time, foam, sediment, flavor, and particle size
Stick Packs and SachetsBulk density, flowability, dust, fill accuracy, and seal cleanliness
CapsulesBulk density, capsule size, achievable fill weight, and unit count
TabletsCompressibility, granulation need, hardness, friability, and disintegration
GummiesHeat exposure, gel compatibility, water activity, texture, and stickiness
Nutrition BarsMoisture migration, flavor, chew texture, and storage stability
Multi-Ingredient BlendsCompatibility with acids, minerals, vitamins, sweeteners, flavors, fibers, and botanicals

The following ranges are formulation-screening references rather than finished-product use recommendations.

  1. Gram-dose powders: Screen approximately 2–15 g per serving according to flavor, serving size, packaging volume, and reconstitution requirements.
  2. Capsules and tablets: Capsules may be screened around 500–1,500 mg per serving, while tablet projects may begin around 1–3 g. Confirm bulk density, unit count, compression, hardness, friability, and disintegration before fixing the commercial serving size.
  3. Gummies: Prototype approximately 1–3 g per serving only after evaluating process heat, gel strength, water activity, flavor release, and storage texture.
  4. Acid and flavor risk: Low pH and reduced sugar may make protein notes more noticeable. Compare acid type, pH, sweetness, flavor, and masking systems.
  5. Mineral interaction risk: Calcium, magnesium, iron, and zinc may alter flavor, color, flow, or dispersion. Conduct pre-blend and sediment trials before scale-up.
  6. Moisture and stability risk: Hygroscopic powders, gummies, bars, and RTD systems may develop caking, stickiness, haze, or sediment. Validate the complete formulation and package.
  7. Vitamin C combination: Review acidity, sensory balance, overage, and finished-product stability when vitamin C is included.
  8. Beauty-formula combinations: Hyaluronic acid, ceramides, elastin peptides, selected vitamins, minerals, or botanicals may be considered after compatibility and dosage review.
  9. Process tip: Pre-blend low-dose flavors, sweeteners, colors, and active ingredients with part of the collagen powder before adding the remaining material.
  10. QA release tip: Compare commercial lots with the approved sample for appearance, odor, taste, dispersibility, protein, moisture, and COA consistency.

Application trials should reproduce the intended serving concentration, water temperature, mixing time, agitation, pH, heat history, filling speed, storage environment, and packaging system. Beverage tests should record reconstitution time, foam, sediment, haze, flavor, and standing time rather than rely on an undefined solubility claim. Sachet and capsule trials should document bulk density, flow, dust, and filling accuracy. Tablet trials should record compression pressure, hardness, friability, and disintegration.

Gummies and nutrition bars require accelerated and real-time stability work because moisture migration, texture, stickiness, and flavor may change after pilot production. Projects moving from a collagen ingredient to a finished drink powder can also review solid beverage manufacturing for formulation, pilot evaluation, filling, and packaging feasibility.

Packaging, Storage & Logistics

ItemStandard B2B Supply Practice
Sample PackingSealed foil bag or sample bottle for laboratory evaluation
Inner PackingFood-grade PE liner or aluminum foil bag
Outer PackingFiber drum, kraft bag, or carton according to quantity and route
Common Bulk Packing20–25 kg per package, subject to order confirmation
Label InformationProduct name, batch number, net weight, production date, shelf life, origin, and storage conditions
PalletizationExport palletization and protective wrapping available
Shelf LifeTypically 24 months in unopened original packaging
Storage and ShippingCool, dry, sealed transport by express, air, sea, or consolidated cargo

Beef Bone Collagen Peptides Powder should remain sealed until use because damaged liners or prolonged exposure to humid air can increase caking and change powder flow. Opened packages should be resealed promptly, protected from cross-contamination, and handled with dry utensils.

Before shipment, buyers should confirm package size, pallet configuration, shipping marks, document language, minimum remaining shelf life, destination-market paperwork, and preferred transport method. For sachet and stick-pack projects, powder flow, dust control, filling accuracy, liner handling, and seal cleanliness should be validated at commercial packing speed.

MOQ, Lead Time, Documents & Inquiry

ItemSupply Information
Standard MOQUsually 25–100 kg
Sample SupportAvailable for qualified formulation and supplier-qualification projects
Standard Lead TimeCommonly 7–15 days after order confirmation; custom testing may extend the schedule
Custom SpecificationProtein, moisture, particle size, molecular weight data, contaminants, and packing can be reviewed
Bulk SupplyAvailable for brands, manufacturers, importers, distributors, and repeat purchasing programs
DocumentationCOA, TDS, SDS, specification, origin, allergen, GMO, gluten, irradiation, animal-origin, and BSE/TSE statements
Certification and Testing ReviewConfirmed against the production facility, product scope, destination market, and analytical plan
Finished-Product SupportSupplement manufacturing services can be reviewed separately for qualified projects

For an accurate quotation, provide:

  • Target application and dosage format
  • Required specification and test limits
  • Estimated trial and commercial quantity
  • Destination market
  • Required documents or testing
  • Packaging requirements and purchasing schedule

Buyers should request the current specification and a representative COA before approving the material. Final pricing and lead time depend on quantity, specification, analytical scope, packaging, destination, and shipping method. Custom analyses or tighter limits may require additional laboratory time. Project details, document requests, and sample requirements can be submitted through the contact team.

Request Ingredient Specs & Quote

Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.

Related Ingredients for Formulation

Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.