Hydrolyzed chicken bone collagen peptides powder for bulk supplement production

Chicken Bone Collagen Peptides Powder

Chicken Bone Collagen Peptides Powder is a hydrolyzed poultry-source ingredient produced from chicken bone collagen material and typically specified at ≥90% protein on a dry basis. The light-colored, water-dispersible powder is suitable for capsules, tablets, sachets, beverage powders, gummies, chews, and nutrition blends. Supply can include an agreed specification, batch COA, poultry-origin documents, samples, and optional identity or application testing. This product is not presented as undenatured chicken cartilage Type II collagen.

Top Key Specs

ItemTypical B2B Specification
Ingredient categoryHydrolyzed chicken bone collagen peptide powder
Raw material sourceChicken bone collagen with poultry origin supported by agreed documents
Processing methodEnzymatic hydrolysis, filtration, concentration, and spray drying
ProteinTypically ≥90.0% on a dry basis
Product typeHydrolyzed chicken bone collagen peptide ingredient
AppearanceWhite to off-white powder
Odor and tasteMild characteristic profile without abnormal odor or taste
CarrierTypically carrier-free
Solubility and dispersibilityDesigned to dissolve or disperse in water; does not form a gelatin-style gel
pHTypically 5.5–7.0 in a 1% aqueous solution
Particle sizeCommonly 80–120 mesh
Loss on dryingTypically ≤7.0%
Ash and mineral carryoverControlled because bone-derived material may contain residual calcium and minerals
Bulk densityTypically 0.35–0.55 g/mL
Shelf lifeTypically 24 months in unopened original packaging
Supply originChina; facility details confirmed before order

Final values, test methods, and optional requirements should be confirmed in the approved commercial specification before order.

Typical COA Limits

Standard Batch COA

Test ItemTypical Limit or Control
AppearanceWhite to off-white powder
Odor and tasteCharacteristic, without abnormal odor or taste
IdentificationConforms to the agreed identity specification
ProteinTypically ≥90.0% on a dry basis
Loss on dryingTypically ≤7.0%
AshControlled according to the approved specification
pH, 1% solutionTypically 5.5–7.0
Particle sizeTypically 80–120 mesh or agreed range
Total plate count≤10,000 CFU/g
Yeast and mold≤100 CFU/g
Coliforms≤10 CFU/g
E. coliNegative/1 g
SalmonellaNegative/25 g
Staphylococcus aureusNegative/1 g
Lead≤0.50 mg/kg
Arsenic≤0.50 mg/kg
Cadmium≤0.50 mg/kg
Mercury≤0.10 mg/kg

Optional Identity and Application Tests

Test ItemProcurement Relevance
HydroxyprolineSupports collagen identity and lot comparison
Amino acid profileReviews the expected glycine, proline, and hydroxyproline pattern
Peptide molecular weight distributionSupports comparison of hydrolysis consistency and formulation behavior
Degree of hydrolysisMay help assess processing consistency and taste intensity
Calcium and mineral profileEvaluates bone-source mineral carryover
Residual fat and oxidation indicatorsSupports odor and storage-stability assessment
Application performanceEvaluates dispersion, clarity, foam, sedimentation, heat, acid, and sensory compatibility

Protein percentage alone does not determine whether chicken bone collagen peptides are suitable for a formulation. Lots with similar protein values may differ in ash, calcium, residual fat, odor, particle properties, and peptide distribution. These differences can affect beverage clarity, aftertaste, foam, capsule capacity, filling accuracy, powder segregation, and storage performance.

Buyers should compare the approved specification, batch COA, poultry-origin documents, sensory characteristics, and a representative sample. Beverage and light-flavor projects should be evaluated in the complete formula because acids, minerals, sweeteners, polyphenols, and processing conditions can change dispersion and taste. See Essencefield’s raw material quality control process for information on supplier qualification, COA review, incoming inspection, material release, and traceability.

Features & Benefits

  • Defined poultry source: Provides a chicken bone-derived option for buyers comparing animal-source collagen ingredients.
  • Hydrolyzed peptide format: Designed for dissolution-focused applications rather than gelatin-style gelling.
  • Specification-led consistency: Agreed release limits and optional identity testing support batch qualification.
  • Bone-source mineral control: Ash and calcium monitoring help manage potential haze, taste, and formulation variability.
  • Production-compatible powder properties: Particle size and bulk density can be assessed for blending, filling, and compression.
  • Sensory and lot comparison: Odor, oxidation, and application testing support repeat commercial orders.

Raw-material approval should consider both analytical compliance and production performance. Powder properties can affect blending, capsule volume, tablet feeding, sachet accuracy, dissolution, foam, and sedimentation. Bone-source minerals may also influence acidic drinks, transparent systems, mineral blends, and formulations containing polyphenol-rich botanicals. Commercial lots should therefore be evaluated against the approved specification and representative sample in the intended dosage form.

Buyers comparing poultry material with Beef Bone Collagen Peptides Powder should review animal origin, peptide testing, mineral carryover, sensory performance, documentation, and destination-market requirements.

Applications & Formulation Ideas

ApplicationPractical Guidance
CapsulesConfirm tapped density, capsule size, achievable fill weight, powder flow, and required capsule count
TabletsReview flowability, compression, hardness, friability, disintegration, and possible granulation needs
Sachets and stick packsEvaluate dusting, moisture protection, seal cleanliness, flow, and fill-weight consistency
Powder blendsMatch particle size and density across proteins, minerals, vitamins, sweeteners, and botanicals
Beverage powdersTest wetting, dispersion, flavor balance, foam, haze, and sedimentation in the finished formula
Gummies and chewsControl heating time, acid-addition sequence, browning, odor carry, texture, and water activity
RTD prototypesReview pH, heat treatment, clarity, sedimentation, microbial control, and shelf-life behavior

Performance depends on the complete formulation rather than the collagen peptide alone. Density differences can cause segregation in dry blends, while acids, minerals, polyphenols, flavors, and high-shear mixing may change beverage clarity, foam, mouthfeel, and aftertaste. Gummies and chews require additional attention to heat, reducing sugars, acidity, odor, and texture. Trials should reproduce the planned inclusion level, mixing sequence, heat exposure, filling conditions, and packaging system.

  1. For sachets and stick packs, evaluate approximately 2.5–10 g per serving, depending on serving size, flavor load, and package volume.
  2. For reconstituted beverage powders, begin around 1–5% and adjust after reviewing mouthfeel, foam, haze, and sedimentation.
  3. For gummies and chews, begin around 1–3% of the syrup phase and evaluate texture, odor, browning, and water activity.
  4. Add the powder under active agitation and standardize water temperature, concentration, mixing time, and observation period before comparing lots.
  5. Avoid unnecessary high-temperature holding with reducing sugars to limit browning and flavor drift.
  6. Match particle size and bulk density with other major dry ingredients to reduce segregation during conveying and filling.
  7. For tablets, conduct a pilot compression test before fixing binder, lubricant, and granulation requirements.
  8. Vitamin C may be combined with collagen peptides after reviewing acidity, flavor balance, stability, and labeling requirements.
  9. Hyaluronic acid or selected minerals may be considered after evaluating density, sedimentation, sensory impact, and dosage-form capacity.
  10. Release commercial material against the approved specification, batch COA, source documents, reference sample, and dosage-form-specific requirements.

Packaging, Storage & Logistics

ItemB2B Supply Information
Sample packingTypically 100 g, 500 g, or 1 kg in sealed moisture-resistant bags
Standard bulk packingTypically 20–25 kg in a food-grade inner liner with a fiber drum, carton, or lined outer bag
Label informationProduct name, batch number, net weight, production date, expiry or retest date, storage condition, and origin
Shelf lifeTypically 24 months in unopened original packaging
Storage and handlingStore sealed in a cool, dry, odor-free area away from heat, sunlight, and moisture; reseal promptly after opening
Shipping and export handlingCourier, air, or sea shipment with suitable palletization and protection from moisture, heat, odors, and package damage

MOQ, Lead Time, Documents & Inquiry

ItemCommercial Supply Details
Standard MOQTypically 100 kg for development or pilot supply, subject to specification and availability
Routine bulk quotationCommonly prepared for approximately 500–1,000 kg requirements
Sample availabilitySamples may be arranged for sensory, dispersion, formulation, and supplier-approval review
Lead timeTypically 2–3 weeks; custom testing, specifications, or documents may require additional time
Documents and complianceCOA, TDS, SDS, specifications, origin documents, optional testing, and applicable certifications
Buyer information requiredTarget specification, dosage form, quantity, destination market, packaging, testing, certification, and document requirements

Document and certification scope may vary by source, facility, product, and destination market. Review the available testing and certification support before sample approval.

Request Ingredient Specs & Quote

Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.

Related Ingredients for Formulation

Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.