Chitosan Powder

Chitosan Powder is a deacetylated chitin-derived polysaccharide, commonly sourced from crustacean shell material and supplied as a light-colored powder. It offers film-forming, binding and texture-related properties for selected formulation systems. Suitable uses include capsules, coating applications and specialty dry blends that require a cationic polysaccharide profile, controlled particle handling and careful dispersion trials before industrial scale-up in pilot batch programs.

Top Key Specs

ItemTypical B2B Specification
Product nameChitosan Powder
Chemical namePoly(β-(1→4)-D-glucosamine), chitosan
Common reference namesBulk chitosan powder, acid-soluble chitosan powder, DDA-controlled chitosan, low viscosity chitosan, high viscosity chitosan
Ingredient categoryDeacetylated chitin polysaccharide; cationic functional polymer
Source or raw material originTypically crustacean-shell chitin from shrimp or crab; fungal-derived chitosan can be discussed for non-crustacean or vegan-positioned projects
Manufacturing processDeproteinization, demineralization, controlled deacetylation, washing, neutralization, drying, milling, sieving, and release testing
Standard specificationDDA, viscosity, particle size, moisture, ash, insolubles, and microbiology-controlled grades; final limits confirmed by project
DDA / degree of deacetylationCommonly 85–95%; tested by declared method and reported according to agreed specification
Viscosity gradeLow, medium, or high viscosity grades; measured under defined acid-solution conditions
Grade optionsFood grade, supplement grade, cosmetic grade, or technical grade according to application and destination market requirements
AppearanceOff-white to pale cream powder
Odor and tasteCharacteristic, mild; low-odor screening available for sensitive powder, gummy, or beverage applications
CarrierTypically carrier-free; carrier or premix system only when required by custom formulation
Solubility / dispersibilityNot directly soluble in neutral water; soluble or dispersible after activation in dilute organic acids such as acetic or lactic acid
pH behaviorFunctional performance is typically evaluated in acidic systems; near-neutral systems require precipitation, haze, and stability testing
Particle size80–200 mesh options; custom PSD or sieve analysis available when required
MoistureTypically controlled at ≤10.0%, or according to agreed specification
Water activityAvailable when required for caking, flowability, or long-distance shipping risk review
Ash / residue on ignitionControlled to support low-residue processing, solution clarity, and filtration performance
Insolubles in acidAvailable as a product-specific release item for clarity, concentrate, coating, or filtration applications
Residual proteinAvailable when required for shell-derived allergen and source-risk review
Bulk densityReported when required for capsule filling, blending, compression, or automated dosing trials
FlowabilityInfluenced by mesh, moisture, aw, and packaging; project-specific flow testing can be arranged
Color impactUsually low in dry blends; liquid systems require acid dissolution and clarity evaluation
Flavor impactMild characteristic profile; finished-product sensory review recommended for beverage powders and gummies
Application compatibilityCapsules, tablets, powder blends, sachets, acidic beverage prototypes, gummies, films, coating trials, and polymer-complex systems
Shelf lifeTypically 24 months when sealed and stored under recommended conditions
StorageCool, dry, sealed, protected from humidity, odor pickup, and prolonged open-air exposure
Available documentsCOA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, irradiation statement, country of origin statement, supplier questionnaire support, and project-related declarations

Typical COA Limits

Physical / Chemical ItemTypical Limit or Reporting Method
AppearanceOff-white to pale cream powder
IdentificationConforms by FTIR or agreed identity method
Degree of deacetylationTypically 85–95%, reported by declared method
ViscosityGrade-specific range reported under fixed acid-solution method
Particle size / mesh80–200 mesh options or according to agreed specification
Moisture / loss on dryingTypically ≤10.0%
Water activityTested when required for caking, flow, or shipping-risk evaluation
Ash / residue on ignitionControlled to agreed limit; tighter limit available for filtration-sensitive projects
Insolubles in acidTested when required for clarity, concentrate, film, or filtration applications
Residual proteinAvailable when required for shell-derived allergen risk review
Bulk densityReported when required for filling, blending, or compression trials
OdorCharacteristic; low-odor review available for sensitive formulations
Residual solventsNot typically expected from standard non-solvent processing; tested when required by specification
Pesticide residuesAvailable when required by destination market or customer-specific specification
Source confirmationCrustacean-shell or fungal-derived origin confirmed according to project documentation
Heavy MetalsTypical Limit
Lead≤1.0 mg/kg or customer-specific limit
Arsenic≤1.0 mg/kg or customer-specific limit
Cadmium≤0.5 mg/kg or customer-specific limit
Mercury≤0.1 mg/kg or customer-specific limit
MicrobiologyTypical Limit
Total plate count≤10,000 CFU/g
Yeast and mold≤1,000 CFU/g
E. coliNegative / 10 g
SalmonellaNegative / 25 g
Staphylococcus aureusTested when required by agreed specification
ColiformsTested when required by agreed specification

Batch Release & Quality Review

Each batch may be reviewed against the approved specification before release, including source confirmation, identity, DDA, viscosity method, moisture, ash, insolubles in acid, particle size, microbiology, heavy metals, odor, color, COA consistency, and specification version control. For shell-derived Chitosan Powder, crustacean allergen review should be completed during supplier approval, and residual protein testing can be arranged when required by the buyer’s QA checklist. Vegan documentation should only be requested for confirmed fungal-derived grades. Viscosity should be interpreted only with the stated polymer concentration, acid type, temperature, spindle, speed, and hydration time because method differences can produce non-comparable results. Retained samples, batch numbering, pre-shipment COA review, manufacturing flow summaries, and change-control communication can support importer, distributor, contract manufacturing, and private label approval files. For acidified liquids, coatings, or polymer complexes, pilot testing should compare hydration time, clarity, viscosity stability, sedimentation, odor, and performance under actual plant water and processing conditions.

Features & Benefits

  • Bulk chitosan powder supplier support for buyers requiring DDA-controlled, viscosity-defined, and mesh-specific material.
  • Chitosan powder manufacturer documentation support for supplier approval, pre-shipment review, and technical file preparation.
  • Controlled DDA specification helps formulation teams define charge density and acid-activated performance.
  • Method-defined viscosity reporting supports pumpability, hydration, film-forming, complexation, and processing comparison across lots.
  • Crustacean-shell and optional fungal-derived sourcing paths support different allergen, labeling, and market-positioning requirements.
  • Food grade, supplement grade, and cosmetic grade options can be confirmed according to destination market and customer specification.
  • Low-ash and insolubles-in-acid controls can be requested for clarity-critical, coating, concentrate, or filtration-limited applications.
  • Mesh options allow formulators to balance hydration speed, dust control, feeding behavior, and blend uniformity.
  • Moisture and water activity control help reduce caking, bridging, and inconsistent dispersion during storage and production.
  • Carrier-free supply is suitable for buyers who need clean formulation space and transparent ingredient declarations.
  • Acid-solubility behavior is defined for formulation teams working with dilute acetic, lactic, or other approved organic acid systems.
  • Documentation support can include COA, TDS, SDS, allergen, GMO, gluten, irradiation, origin, and project-specific statements.
  • Retained samples, batch traceability, and change-control records help QA teams manage audits and incoming quality review.
  • Pre-shipment COA review and retained-sample comparison can be arranged before bulk shipment when required.
  • Application-specific testing can be arranged for DDA, viscosity, insolubles, odor, particle size, microbial limits, heavy metals, or destination-market requirements.

Applications & Formulation Ideas

Primary Application Formats

FormatPractical Formulation Notes
CapsulesSuitable for dry-fill capsule blends when particle size, bulk density, moisture, flowability, and odor are confirmed. Prototype inclusion depends on formula design, capsule size, and blend density. Flow aids may be evaluated if fine mesh increases dust or bridging.
TabletsCan be evaluated in tablets where compression behavior, binder contribution, disintegration, and moisture stability require review. Trial ranges often start around 1–5% in dry blends, adjusted after hardness, friability, and disintegration testing.
Powder blendsSuitable for functional dry blends, but uniformity should be checked because low bulk density and fine particle size may affect segregation. Matching mesh range and controlled mixing time support repeatable blending.
Stick packs and sachetsApplicable when powder flow, dusting, fill-weight accuracy, odor, and humidity sensitivity are controlled. Barrier packaging is recommended for high-humidity distribution routes.
Acidic beverage powdersCan be evaluated where dissolution occurs in an acidic system. Chitosan Powder is not a general instant neutral-water-soluble gum; acid type, pH, shear, and hydration time must be validated.
GummiesMay be evaluated in acidic gummy systems, especially where interaction with pectin, gelatin, or other polymers is expected. pH, heating stage, order of addition, viscosity, and texture drift should be tested.
Film and coating trialsSuitable for acid-based film-forming or coating research. Viscosity grade selection should balance sprayability, coating uniformity, drying behavior, and film strength.
Private label supplement projectsAvailable for projects requiring controlled DDA, viscosity, mesh, COA, SDS, TDS, supplier questionnaires, and supplier approval documentation before commercial production.

Application Formats Requiring Extra Testing

FormatExtra Testing Required
RTD drinksRequires acid-solubility, haze, precipitation, sedimentation, taste, pH drift, and shelf-stability review. Near-neutral RTD systems are not recommended without pilot evidence.
High-mineral formulasIonic strength and divalent minerals can reduce electrostatic performance. Use actual plant water and full formula minerals during testing, not deionized water alone.
Alginate, pectin, carrageenan, or carbomer systemsChitosan is cationic and may form rapid complexes with anionic polymers. Addition order, shear, ratio, and pH must be controlled to avoid clumping or unstable flocs.
Clear liquid concentratesInsolubles in acid, ash, filtration rate, and post-filtration clarity should be specified before scale-up.
Low-flavor productsCharacteristic odor may be acceptable in capsules but more noticeable in beverage powders or gummies. Warm-jar and finished-product sensory checks are recommended.
Heat-processed systemsHeating may affect viscosity, hydration profile, and interaction with sugars, acids, or hydrocolloids. Pilot batches should simulate actual residence time and cooling conditions.

Formulation Notes

Chitosan Powder is typically selected by B2B buyers based on DDA, viscosity, mesh size, source origin, acid-solubility behavior, and documentation requirements. The powder should be hydrated by acidifying the liquid phase first, establishing sufficient shear, and adding powder slowly to avoid fish-eyes. For liquid systems, typical screening may begin with 0.2–1.0% polymer for film or solution work, while clarification trials may start at ppm-level dosing and optimize by turbidity and filtration rate. For dry tablets, 1–5% can be evaluated as a prototype range, but hardness improvement must be balanced against disintegration delay and processing flow.

A defined viscosity protocol is essential: polymer percentage, acid concentration, temperature, hydration time, spindle, and speed should be fixed before comparing suppliers or batches. Finer mesh generally hydrates faster but increases dusting and may reduce feeding consistency, while coarser mesh may require longer hydration and higher shear. Food grade and supplement grade chitosan specifications can be confirmed according to buyer application, destination market, and QA checklist. When used with pectin, alginate, carrageenan, carbomer, proteins, or mineral salts, ingredient order and ionic strength should be tested carefully. QA release for commercial production should include DDA, viscosity, moisture, ash, insolubles in acid, mesh, odor, microbiology, heavy metals, and retained-sample comparison.

Packaging, Storage & Logistics

ItemB2B Supply Details
Sample packing100 g, 500 g, 1 kg, or project-specific sample packs for DDA, viscosity, mesh, and formulation screening
Bulk inner packingFood-grade PE liner or double liner when humidity protection is required
Bulk outer packing20–25 kg bag, carton, or drum according to grade, destination, and handling requirement
Label informationProduct name, batch number, net weight, production date, expiry or retest date, storage condition, grade, and country of origin where required
PalletizationExport palletization available with stretch wrap, carton protection, and moisture-control handling where required
Shelf lifeTypically 24 months under sealed, cool, dry storage
Storage conditionsStore in a cool, dry, ventilated area away from humidity, direct sunlight, strong odors, solvents, and volatile materials
Humidity controlImportant for fine-mesh grades because moisture pickup may increase caking, bridging, and slower dispersion
Temperature controlNormal dry cargo shipping is typically suitable; avoid prolonged high-temperature and high-humidity exposure
Shipping optionsExpress samples, air freight, sea freight, and consolidated export shipments available according to order size
Export documentsCommercial invoice, packing list, COA, SDS, TDS, specification sheet, origin statement, and other project-required documents
Long-distance shippingDouble-liner packing, pallet protection, and humidity-risk review are recommended for tropical routes or long transit time
Handling after openingReseal immediately after sampling, minimize open-air exposure, and use clean tools to avoid moisture pickup and foreign matter contamination

MOQ, Lead Time, Documents & Inquiry

ItemStandard Support
Standard MOQTypically 25 kg for bulk supply; trial quantities and multi-grade samples can be discussed
Sample policySamples available for lab evaluation, supplier approval, DDA comparison, viscosity screening, and formulation trials
Standard lead timeTypically 7–15 working days depending on stock, mesh, viscosity grade, and testing requirements
Custom specification lead timeConfirmed by project after reviewing DDA, viscosity, mesh, insolubles, ash, microbiology, documentation, and packaging needs
Bulk supply supportRegular supply available for supplement, food, cosmetic, and contract manufacturing projects
Custom manufacturing supportDDA adjustment, viscosity grade selection, particle size control, insolubles control, low-odor screening, and documentation alignment
OEM / private label supportIngredient supply, formula review, specification alignment, document support, and private label supplement project assistance
Available documentsCOA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement for confirmed fungal-derived material, irradiation statement, country of origin statement, and project-related declarations
Testing supportDDA, viscosity, moisture, ash, insolubles in acid, mesh, bulk density, microbiology, heavy metals, residual protein, odor, and market-specific tests when required
Supplier approval supportSupplier questionnaire, manufacturing flow summary, specification version review, pre-shipment COA review, retained-sample support, and change-control communication when required
Quotation details neededTarget specification, application format, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline

For Chitosan Powder inquiries, please provide your target DDA, viscosity grade, particle size, application format, order quantity, destination market, required document checklist, testing limits, packaging preference, and expected project timeline. For formulation projects, also share your pH range, acid system, mixing process, water quality, heat process, and whether the formula contains anionic polymers, minerals, proteins, or hydrocolloids. Pre-shipment COA review, sample comparison, and project-specific documentation can be arranged for qualified bulk orders when required by your QA or supplier approval process.

Request Ingredient Specs & Quote

Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.

Related Ingredients for Formulation

Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.