
Colostrum Powder is produced from early-lactation bovine colostrum using controlled pasteurization, filtration, concentration when required, and low-temperature spray drying. Standard IgG ≥20% is available alongside ≥10% and ≥30% grades. The light cream powder is suitable for capsules, sachets and nutrition blends, supported by batch COA, technical documents and bulk ingredient supply.
| Item | Typical Specification |
|---|---|
| Product Name | Colostrum Powder |
| Source | Bovine colostrum from early-lactation milk |
| Common Names | Bovine colostrum powder, IgG colostrum powder |
| Process | Controlled pasteurization, filtration, concentration when required, and low-temperature spray drying |
| Standard IgG | ≥20% |
| IgG Options | ≥10%, ≥20%, ≥30% |
| IgG Method | ELISA |
| Appearance | Creamy white to light yellow powder |
| Carrier | No carrier added as standard |
| Particle Size | 80 mesh typical |
| Moisture | ≤5.0% typical |
| Bulk Density | 0.40–0.65 g/mL typical |
| Allergen | Contains milk |
| Origin | China |
| Shelf Life | 24 months under recommended storage conditions |
Select the IgG grade according to the target finished-product IgG level and confirmed batch assay. Buyers looking for additional dairy and nutritional ingredients can also review Essencefield’s Protein Ingredients portfolio.
Final release criteria should follow the agreed specification and individual batch COA.
| Test Item | Typical Limit / Control |
| Appearance | Creamy white to light yellow powder |
| Identification | Conforms |
| IgG Assay | ≥20% typical |
| IgG Method | ELISA |
| Moisture | ≤5.0% |
| Water Activity | ≤0.60 |
| pH, 1% Solution | 6.0–7.0 |
| Total Protein | Available when specified |
| Total Plate Count | ≤10,000 CFU/g |
| Yeast & Mold | ≤100 CFU/g |
| Coliforms | According to specification |
| E. coli | Negative |
| Salmonella | Negative |
| Staphylococcus aureus | Negative |
| Lead (Pb) | ≤0.5 ppm |
| Arsenic (As) | ≤0.5 ppm |
| Cadmium (Cd) | ≤0.2 ppm |
| Mercury (Hg) | ≤0.1 ppm |
| Aflatoxin M1 | Available when specified |
| Veterinary Drug Residues | Available according to market requirements |
| Milk Allergen | Declared |
Standard release focuses on IgG, moisture, microbiology, heavy metals and milk-allergen status. Additional analytical requirements can be added according to customer needs. Broader laboratory support is available through Essencefield’s Testing & Certifications service.
Based on nominal assay, 10%, 20% and 30% IgG grades provide approximately 100 mg, 200 mg and 300 mg IgG per gram of powder, respectively. Final formulation should use the confirmed batch assay and target IgG requirement.
Capsules & Tablets:
Suitable for solid-dose nutrition formats where IgG contribution, fill weight and powder handling must be balanced. Bulk density, flowability and compression behavior should be confirmed during formulation development.
Sachets & Stick Packs:
Suitable for single-serving dry blends. Moisture protection is important when combined with hygroscopic minerals, fibers or sweeteners.
Powdered Nutrition Blends:
Can be combined with proteins, vitamins, minerals and other dry ingredients. Particle size and density differences should be considered during blending. For dairy-based formulations, Whey Powder can provide additional dairy solids and protein functionality.
Beverage Powders:
Evaluate dispersibility, foam, sedimentation and sensory performance in the final formula rather than relying only on raw-material testing.
Bars & Chewables:
Suitable for selected low-moisture systems where processing temperature, water activity and storage stability are controlled.
| Item | Typical Information |
| Sample Packaging | Sealed evaluation pack |
| Bulk Inner Packaging | Food-grade PE or lined inner packaging |
| Bulk Outer Packaging | 25 kg fiber drum or carton |
| Shelf Life | 24 months |
| Storage | Cool, dry conditions below 25°C when possible |
| Shipping | Air or sea freight |
Keep the powder sealed and protected from humidity, direct sunlight and prolonged heat. Special labels, shipping marks and pallet requirements should be confirmed before shipment.
| Commercial Item | Information |
| MOQ | Usually 25–100 kg depending on grade and order requirements |
| Sample | Available for formulation and QA evaluation |
| Lead Time | Typically 7–15 days for available specifications |
| Bulk Supply | Available |
| Custom Specification | IgG grade, particle size and testing scope can be reviewed |
| Private Label / OEM | Available for qualified projects |
Available documents include COA, TDS, SDS, product specification, allergen statement and country-of-origin documentation. Additional declarations can be provided when required.
For quotation, provide the required IgG grade, quantity, application, destination market and special testing or documentation needs. Sample evaluation can be arranged before bulk ordering when formulation validation is required.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.