

Cyclodextrin Powder is a carbohydrate-based encapsulation excipient used for inclusion complexing, flavor protection and carrier design. It is typically supplied as a fine white powder with low odor, neutral taste and practical powder flow. The material suits drink powders, tablets, flavor systems and dry premixes where dispersibility, clean handling and ingredient stability are important during formulation development and commercial scale-up.
| Item | Typical B2B Specification |
|---|---|
| Product name | Cyclodextrin Powder |
| Primary supply type | Beta-cyclodextrin powder unless alpha-, gamma-, or modified cyclodextrin is specifically confirmed by project |
| Common reference names | Beta-cyclodextrin powder, β-cyclodextrin, beta cyclodextrin, cyclomaltoheptaose |
| Ingredient category | Starch-derived cyclic oligosaccharide; functional carrier, complexing agent, and excipient ingredient |
| CAS No. | 7585-39-9 for beta-cyclodextrin, confirmed according to agreed specification |
| Molecular category | Cyclic oligosaccharide composed of seven glucose units for beta-cyclodextrin |
| Source or raw material origin | Food-grade starch source, confirmed by sourcing record and batch documentation |
| Manufacturing process | Enzymatic conversion, purification, crystallization, separation, drying, and controlled sieving |
| Standard specification | Beta-cyclodextrin typically ≥98.0%, confirmed by current specification and COA |
| Custom specification options | Assay range, particle size, bulk density, moisture limit, microbiological limits, and documentation package can be confirmed by project |
| Grade | Food, supplement, excipient, and selected cosmetic raw material grades available according to intended use |
| Appearance | White to off-white crystalline powder or fine powder |
| Odor and taste | Characteristic, neutral to slightly bland; odor neutrality can be checked for flavor-sensitive formulas |
| Carrier | Standard beta-cyclodextrin powder is normally carrier-free unless a custom premix is requested |
| Particle size | Commonly supplied around 80–120 mesh; finer or controlled particle size options may be available |
| Solubility / dispersibility | Slightly soluble in cold water; warm premixing, hydration, or pre-complexation may improve processing behavior |
| pH behavior | Typically near neutral in aqueous dispersion or solution, confirmed by agreed batch method |
| Loss on drying / moisture | Commonly controlled at ≤10.0%, or according to customer-specific limit |
| Residue on ignition / ash | Controlled as a purification and inorganic residue indicator |
| Bulk density | Working range can be declared for filling, blending, and volumetric dosing projects |
| Flowability | Generally free-flowing when moisture is controlled; humidity exposure may increase caking risk |
| Color impact | Low color impact in most dry blends due to white to off-white appearance |
| Flavor impact | Usually low direct flavor impact, but may influence release perception with volatile, bitter, or oil-soluble guest materials |
| Stability focus | Moisture control, odor protection, particle size consistency, assay consistency, and batch-to-batch physical profile |
| Application compatibility | Capsules, tablets, sachets, powder blends, beverage powders, gummies, functional premixes, and flavor carrier systems |
| Shelf life | Typically 24 months in unopened original packaging when stored under recommended conditions |
| Origin | China origin and manufacturing support available unless otherwise confirmed by project |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-specific documents |
Typical COA items for Cyclodextrin Powder should verify identity, beta-cyclodextrin assay, physical consistency, moisture control, microbiology, heavy metals, and application-relevant handling behavior. For most bulk supply projects, this product refers to beta-cyclodextrin powder unless another cyclodextrin type is confirmed by specification. Limits may be adjusted according to destination market requirements, customer-specific limits, intended grade, and the agreed specification.
| Physical & Chemical Item | Typical Limit or Control Point |
|---|---|
| Appearance | White to off-white powder or crystalline powder |
| Identification | Conforms to agreed reference method |
| Cyclodextrin type | Beta-cyclodextrin unless another type is confirmed by specification |
| CAS reference | 7585-39-9 for beta-cyclodextrin, confirmed when required |
| Assay / purity | Beta-cyclodextrin typically ≥98.0%, confirmed by specification |
| Loss on drying | Commonly ≤10.0%, or customer-specific limit |
| Residue on ignition / ash | Controlled according to agreed specification |
| pH | Typically near neutral range, confirmed by batch method |
| Particle size | Target mesh or particle size distribution confirmed by order |
| Bulk density | Declared working range when required for filling or blending validation |
| Related saccharides | Controlled when required for stickiness, hygroscopicity, or sensory-sensitive formulas |
| Odor | Characteristic, no abnormal odor |
| Solubility / dispersibility | Confirmed according to intended use and agreed method |
| Microbiological Item | Typical Limit |
|---|---|
| Total plate count | Commonly ≤1,000 CFU/g |
| Yeast and mold | Commonly ≤100 CFU/g |
| Coliforms | Controlled according to agreed specification |
| E. coli | Negative by agreed method |
| Salmonella | Negative by agreed method |
| Staphylococcus aureus | Available when required |
| Other market-specific pathogens | Available when required by application or destination market |
| Heavy Metals & Contaminants | Typical Control Approach |
|---|---|
| Lead | Tested according to agreed specification |
| Arsenic | Tested according to agreed specification |
| Cadmium | Tested according to agreed specification |
| Mercury | Tested according to agreed specification |
| Total heavy metals | Confirmed by customer-specific or market-specific limit |
| Residual solvents | Generally not expected for standard aqueous enzymatic processing; tested if required or if a modified process is declared |
| Pesticide residues | Available when required by destination market or customer specification |
| Foreign matter | Controlled through production, sieving, and batch inspection |
| Product-Specific Quality Indicator | Why It Matters |
|---|---|
| Beta-cyclodextrin assay | Confirms the active cyclic oligosaccharide basis for complexing-agent applications |
| Moisture profile | Influences caking, flowability, loading behavior, and storage stability |
| Particle size distribution | Affects blend uniformity, dusting, compression behavior, and filling accuracy |
| Bulk density | Important for volumetric filling, sachet packing, capsule sizing, and tablet blend design |
| Odor neutrality | Critical for flavor systems, botanical blends, and odor-sensitive formulas |
| Related saccharides | Excess low-molecular saccharides may increase stickiness or alter sensory neutrality |
| Complexation screening | Recommended when used with oils, aroma fractions, bitter actives, or lipophilic compounds |
Before release, each Cyclodextrin Powder batch may be reviewed against the agreed specification, purchase order, retained production record, and COA data. Identity confirmation should verify that the material matches beta-cyclodextrin rather than a general starch hydrolysate or non-equivalent oligosaccharide blend. Assay, moisture, ash, particle size, bulk density, odor, color, and microbiological results should be compared with historical batch records when long-term supply consistency is required. Heavy metals and other contaminants are checked according to the applicable testing plan, while optional pesticide, residual solvent, or market-specific tests can be added when required by the destination market. For functional carrier projects, QA teams may also request an application-linked comparison, such as dispersion behavior, free-oil observation, guest loading trial, odor retention check, or reconstituted sensory review. Retained samples and batch-to-batch comparison help purchasing and formulation teams qualify both compliance and practical processing performance.
Cyclodextrin Powder is used as a technical carrier where standard bulking agents may not provide enough control over volatility, odor, taste interaction, or lipophilic ingredient handling. Its value depends on a consistent cyclic oligosaccharide structure, controlled beta-cyclodextrin assay, low abnormal odor, reliable particle size, and moisture-managed packaging.
| Format | Practical Formulation Notes |
|---|---|
| Capsules | Suitable for dry blends where beta-cyclodextrin powder functions as a carrier or compatibility aid. Flowability, bulk density, and particle size should be checked against filling speed, target fill weight, and blend uniformity requirements. |
| Tablets | Can be evaluated in direct compression or granulated systems, but compression behavior depends on formula composition. Binder level, lubricant compatibility, moisture, and particle size should be tested before scale-up. |
| Powder blends | Useful in dry premixes containing flavors, botanical extracts, odor-active ingredients, or lipophilic components. Blend order and pre-complexation procedure should be defined before pilot production. |
| Stick packs and sachets | Particle size distribution and bulk density are important for filling accuracy. Cyclodextrin Powder may support cleaner handling when selected volatile or oil-based ingredients need a dry carrier approach. |
| Beverage powders | Can be used in instant powder systems, but cold-water solubility is limited. Warm premixing, pre-hydration, or controlled complexation may improve performance depending on the guest material. |
| Flavor and aroma systems | Commonly evaluated as a complexing agent for volatile components where aroma retention, free-oil reduction, and powder handling need technical screening. |
| Botanical or functional blends | Commonly evaluated where bitterness, odor, or volatile-active retention affects finished blend quality. Application-specific sensory and stability screening is recommended. |
| Private label supplement projects | Suitable for capsules, tablets, powder sachets, gummies, and beverage powder concepts where technical carrier behavior and supplier documentation are required. |
| Format | Extra Testing Required |
|---|---|
| RTD drinks | Cold solubility, clarity, sedimentation, heat treatment, pH range, and long-term storage behavior should be evaluated before commercial use. |
| Gummies | Heat exposure, water activity, syrup compatibility, texture impact, and release behavior should be tested because cyclodextrin may interact with flavors or lipophilic actives. |
| Functional bars | Moisture migration, flavor release, oil binding, texture, and shelf-life behavior should be checked in the final matrix. |
| High-oil premixes | Free surface oil, carrier ratio, mixing temperature, guest loading method, and oxidation-sensitive components should be evaluated during pilot trials. |
| Strong-flavor or strong-odor formulas | Sensory masking performance is guest-specific. A material that works in one flavor system may not perform the same way in another. |
| Mineral or electrolyte blends | Compatibility with hygroscopic minerals, acids, sweeteners, and flavors should be checked to prevent caking or uneven dispersion. |
| Item | Standard B2B Handling |
|---|---|
| Sample packing | Small evaluation samples can be supplied in sealed foil bags or sample bottles, depending on requested quantity and shipping route. |
| Bulk inner packing | Food-grade polyethylene bag or equivalent moisture-protective inner liner. |
| Bulk outer packing | Fiber drum, carton, or kraft bag format according to order quantity and shipping requirements. |
| Typical net weight | Common bulk units can be discussed by project, with 20 kg or 25 kg formats commonly used for dry powders when suitable. |
| Label information | Product name, batch number, net weight, manufacture date, retest or expiry date, storage condition, and origin information as required. |
| Palletization | Available for bulk export orders; pallet material and fumigation documents can be coordinated when required. |
| Shelf life | Typically 24 months when unopened and stored under recommended conditions. |
| Storage conditions | Store sealed in a cool, dry, clean, odor-free area away from moisture, direct sunlight, and volatile chemicals. |
| Humidity control | Keep packaging tightly closed after sampling; prolonged exposure to humid air may increase caking and reduce flowability. |
| Temperature control | Ambient dry storage is generally suitable; avoid high heat and condensation during warehousing and transport. |
| Shipping options | Courier samples, air shipment, sea shipment, and freight-forwarder delivery can be arranged according to order size and timeline. |
| Export documents | Commercial invoice, packing list, COA, SDS, country of origin statement, and other project documents can be prepared when required. |
| Long-distance shipping | Moisture-proof packing, pallet protection, and container condition should be considered for sea freight or high-humidity routes. |
| Handling after opening | Reseal immediately, avoid odor contamination, use clean tools, and record partial-bag usage for traceability. |
| Item | B2B Supply Support |
|---|---|
| Standard MOQ | Flexible MOQ can be confirmed according to stock status, specification, packing format, and destination market. |
| Sample policy | Evaluation samples are available for formulation testing, supplier approval, and document review. |
| Standard lead time | Usually confirmed after specification, quantity, packaging, and document requirements are reviewed. |
| Custom specification lead time | Custom particle size, moisture target, assay requirement, bulk density range, or additional testing may require extra preparation time. |
| Bulk supply support | Suitable for distributors, importers, supplement brands, private label companies, and contract manufacturers requiring repeat supply. |
| Custom manufacturing support | Assay adjustment, particle size control, carrier-free supply, premix development, and application-oriented testing can be discussed by project. |
| OEM / private label support | Ingredient supply can support capsules, tablets, powder blends, sachets, gummies, and beverage powder development. |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and other project-related documents. |
| Testing support | Assay, identity, microbiology, heavy metals, moisture, ash, particle size, bulk density, and application-specific checks can be arranged according to the agreed testing plan. |
| Buyer information needed | Target specification, cyclodextrin type, application format, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline. |
For quotation and technical evaluation, please provide the target Cyclodextrin Powder specification, required cyclodextrin type, beta-cyclodextrin assay requirement, application format, particle size preference, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline. Buyers may also request a current COA, evaluation sample, specification sheet, SDS, custom particle size review, and bulk supply confirmation before procurement approval.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.