L-carnitine base white crystalline powder for bulk supplement manufacturing

L-Carnitine Powder

L-Carnitine Powder is supplied as L-carnitine free base, also known as levocarnitine or L-carnitine base powder, with a typical assay of ≥98.0% by HPLC. The white crystalline, water-soluble ingredient supports capsules, tablets, powder blends, stick packs and beverage prototypes. Essencefield coordinates specification review, batch-linked documents, sample evaluation and traceable bulk supply for commercial supplement projects.

Top Key Specs

ParameterTypical B2B Specification
Product identityL-Carnitine Powder; L-carnitine free base
Also known asL-carnitine base powder; levocarnitine
CAS number541-15-1
Molecular formulaC7H15NO3
Molecular weight161.20 g/mol
AssayTypically ≥98.0%
Test methodHPLC
AppearanceWhite crystalline powder
SolubilityFreely soluble in water
Particle sizeTypically 80–100 mesh; custom sizing can be discussed
MoistureControlled by the approved specification
PackagingCommonly 25 kg per drum or carton
Shelf lifeUp to 24 months when unopened and correctly stored
MOQUsually starts from 25 kg, subject to stock and specification

Free base should not be compared with carnitine salts by price per kilogram alone. Buyers should compare chemical form, assay basis and equivalent L-carnitine contribution, together with physical properties that may affect label calculations, powder flow, capsule filling and tablet processing.

Typical COA Limits

Final limits and analytical methods are confirmed through the buyer-approved specification and batch COA.

Test ItemTypical Control
AppearanceWhite crystalline powder
IdentificationConforms
AssayTypically ≥98.0% by HPLC
Optical rotationConforms to the approved L-isomer range
D-carnitineProject-specific
Related substancesProject-specific
Loss on dryingProject-specific
Residue on ignitionProject-specific
pHReported under defined test conditions
Particle sizeTypically 80–100 mesh or customized
Bulk densityReported by batch when required
Heavy metalsLead, arsenic, cadmium and mercury controlled by specification
MicrobiologyTotal plate count, yeast and mold, E. coli and Salmonella controlled by specification

Supplier qualification should begin with verification of the exact chemical form because free base, L-carnitine L-tartrate and acetyl-L-carnitine are not interchangeable on a weight-for-weight basis. HPLC assay confirms concentration but does not independently establish stereochemical identity or suitability for the intended production process. QA teams should therefore review identification, optical rotation, D-carnitine where applicable, related substances, loss on drying, particle size, bulk density, microbiology and heavy metals. Moisture exposure during sampling or repacking may reduce flow, while changes in particle size or density can affect capsule fill weight, tablet compression and blend uniformity. Each incoming lot should be checked against the signed specification and current COA, with comparison to previous approved batches and retained samples where available. Additional methods, third-party analysis and destination-market requirements should be agreed before ordering. Essencefield’s testing and certification support can assist with document review, testing scope and batch-release requirements.

Features & Benefits

  • Defined free-base identity: Clear form identification reduces confusion with tartrate or acetylated materials.
  • Assay and stereochemical review: HPLC assay, identification, optical rotation and optional D-carnitine control support incoming QC.
  • Formulation-ready properties: Water solubility and selectable particle size support blending, filling, tableting and beverage development.
  • Batch consistency support: Batch comparison helps manage physical-property and repeat-order variation.
  • Documentation and scalable supply: Quality documents, evaluation samples and commercial quantities can be coordinated for qualified projects.

Buyers changing sources should compare specifications, representative samples and batch COAs before commercial approval, supported by Essencefield’s raw material quality controls.

Applications & Formulation Ideas

FormatFormulation Considerations
CapsulesConfirm density, fill weight, capsule size and powder flow.
TabletsEvaluate compression, friability, disintegration and moisture uptake.
Powder blendsControl particle-size and density differences to reduce segregation.
Stick packs and sachetsUse moisture-barrier films and verify flow under actual packing conditions.
Beverage systemsTest dissolution, sensory profile, pH and physical stability.
Gummies and chewablesValidate taste, texture and active retention after heating.
Carnitine FormMain Procurement Consideration
L-carnitine free baseHigher active contribution per unit weight; humidity, taste and flow require evaluation
L-Carnitine L-Tartrate PowderDifferent molecular and assay basis; equivalent L-carnitine contribution must be recalculated
Acetyl-L-carnitineSeparate chemical identity, specification basis and product positioning

Commercial performance depends on more than water solubility. Particle-size alignment and bulk-density differences can influence mixing uniformity, hopper discharge, filling accuracy and segregation during transport. Fine or low-density material may require a geometric premix, controlled addition order or adjustment of mixer loading. Humidity should be controlled during weighing, sieving and blending because moisture uptake can change powder flow and increase caking. Capsule prototypes should be evaluated for tapped density and achievable fill weight, while tablet trials should confirm compression behavior, friability and disintegration. Beverage, gummy and chewable projects require complete-formula testing because acids, minerals, electrolytes, sweeteners and botanical ingredients can alter taste, clarity, texture or physical stability. Heated processes also require active-retention checks. The selected carnitine form, batch assay and input calculation should be fixed before quotations, labels or production instructions are approved. Projects requiring prototype development or manufacturability review can use Essencefield’s custom formulation service.

Formulation Guidance

  1. Capsule prototype: Evaluate approximately 250–750 mg per capsule, then confirm density, capsule size and daily unit count.
  2. Tablet prototype: Evaluate approximately 500–1,000 mg per tablet with the selected tooling and excipient system.
  3. Powder prototype: Evaluate approximately 500–2,000 mg per serving according to serving size and product positioning.
  4. Assay and form conversion: Calculate input from the batch assay and recalculate equivalent active contribution when changing carnitine form.
  5. Humidity risk: Limit open exposure during weighing and blending; reseal unused material promptly.
  6. Segregation risk: Align particle size and density with major ingredients or prepare a geometric premix.
  7. Flavor risk: Use sweetness-acid balance and targeted masking in beverages, gummies and chewables.
  8. Sports nutrition synergy: Evaluate with selected amino acids or electrolytes after checking taste and blend density.
  9. Energy formula synergy: Consider selected B vitamins or coenzyme Q10, subject to formulation and market review.
  10. Process and QA control: Validate mixing order and representative sampling; confirm form, assay, moisture and blend uniformity before release.

Required raw-material input = target L-carnitine amount ÷ batch assay fraction

Prototype ranges are formulation starting points rather than final label recommendations. Finished-product dosage, claims and compliance should be reviewed for the intended market.

Packaging, Storage & Logistics

ItemTypical B2B Support
Inner packagingMoisture-resistant PE or aluminum-foil bag
Outer packagingFiber drum, carton or project-specific export pack
Standard bulk sizeCommonly 25 kg per drum or carton
Label informationProduct name, batch number, net weight, relevant dates and storage conditions
Shelf lifeUp to 24 months when unopened and correctly stored
StorageKeep sealed in a cool, dry and ventilated area away from heat, sunlight, humidity and strong odors
ShippingCourier, air freight, sea freight or customer-appointed forwarder
Export documentsCommercial invoice, packing list and agreed technical or origin documents

Keep the inner liner sealed until dispensing and reseal unused material after opening. For humid or long-distance routes, confirm packaging and warehouse conditions, then inspect seals, labels and signs of moisture exposure at receiving.

MOQ, Lead Time, Documents & Inquiry

ItemTypical B2B Support
Inner packagingMoisture-resistant PE or aluminum-foil bag
Outer packagingFiber drum, carton or project-specific export pack
Standard bulk sizeCommonly 25 kg per drum or carton
Label informationProduct name, batch number, net weight, relevant dates and storage conditions
Shelf lifeUp to 24 months when unopened and correctly stored
StorageKeep sealed in a cool, dry and ventilated area away from heat, sunlight, humidity and strong odors
ShippingCourier, air freight, sea freight or customer-appointed forwarder
Export documentsCommercial invoice, packing list and agreed technical or origin documents

Keep the inner liner sealed until dispensing and reseal unused material after opening. For humid or long-distance routes, confirm packaging and warehouse conditions, then inspect seals, labels and signs of moisture exposure at receiving.

Request Ingredient Specs & Quote

Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.

Related Ingredients for Formulation

Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.