L-Lysine Base Powder

L-Lysine Base Powder is a free-form lysine amino acid ingredient supplied as a white crystalline powder for nutrition and formulation use. Unlike lysine salt forms, the base form may affect pH behavior, taste direction and compatibility in multi-ingredient blends. It suits capsules, tablets, dry powder premixes and fortified formulas requiring defined lysine identity and controlled batch uniformity during scale-up validation.

Top Key Specs

The specification should be confirmed before sampling so the evaluation batch, pilot batch, and commercial order follow the same release logic.

ItemTypical Specification / B2B Supply Information
Product nameL-Lysine Base Powder
Chemical nameL-Lysine, free base
Common reference namesL-Lysine Base, L-Lysine Free Base, bulk L-Lysine Base, free-base lysine powder
CAS number56-87-1
Molecular formulaC6H14N2O2
Molecular weight146.19 g/mol
Ingredient categoryFermentation-derived amino acid ingredient
Source / raw material originCommonly produced from plant-based carbohydrate feedstock through fermentation
Process typeFermentation, purification, crystallization, drying, milling, and sieving
Standard specificationL-Lysine assay typically ≥98.5% on an anhydrous basis
Free-base positioningHigher lysine contribution per gram than L-Lysine HCl; does not add chloride to the formula
GradeFood grade / dietary supplement grade; destination-market requirements confirmed by project
AppearanceWhite to off-white crystalline powder
Odor and tasteCharacteristic amino acid odor; alkaline and slightly bitter sensory profile
CarrierStandard material is carrier-free
SolubilityFreely soluble in water; full pH check should be made after complete dissolution
pH behaviorAlkaline in aqueous solution; 1% solution typically around pH 10.5–12.0
Particle size60–80 mesh typical; D10/D50/D90 profile available when required
Loss on dryingTypically ≤1.0%, according to agreed specification
Water activityLow-aw control available; ≤0.25 can be discussed for humidity-sensitive formats
Residue on ignitionControlled as an inorganic residue indicator; limit confirmed by specification
Bulk densityTypically 0.45–0.65 g/mL; project-specific density window available
FlowabilityInfluenced by particle size, fines ratio, water activity, humidity exposure, and packaging integrity
Heavy metalsPb, As, Cd, and Hg tested according to agreed specification
MicrobiologyTotal plate count, yeast and mold, coliforms, E. coli, Salmonella, and Staphylococcus aureus available when required
Stability profileStable in sealed packaging when protected from humidity, odor pickup, and repeated opening
Application compatibilityCapsules, tablets, powder blends, stick packs, sachets, beverage powders, RTD prototypes, gummies, bars, and premixes
Processing behaviorWater soluble, alkaline, humidity-sensitive, and potentially reactive with reducing sugars under heat
Shelf lifeTypically 24 months when sealed and stored under recommended conditions
OriginChina; lot-specific origin statement available upon request
Main applicationsAmino acid blends, protein fortification systems, sports nutrition powders, supplement premixes, functional beverages, and contract manufacturing projects
Available documentsCOA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related documents

Typical COA Limits

Typical COA limits for L-Lysine Base Powder should be aligned with the agreed specification, application format, destination market, and buyer QA checklist. For buyers comparing lysine forms, free-base identity and chloride control are key release points.

Physical / Chemical ItemTypical Limit or Control
AppearanceWhite to off-white crystalline powder
IdentificationConforms by HPLC retention time, FTIR, optical rotation, or agreed method
AssayL-Lysine typically ≥98.5% on an anhydrous basis
Specific rotation / stereochemical checkConfirms L-form identity according to agreed method
Related substancesControlled by HPLC or internal purification trend when required
Loss on dryingTypically ≤1.0%
Water activityLow-aw target available for caking and flow-risk management
Residue on ignitionControlled according to agreed specification
ChlorideLow / controlled to support free-base profile
Particle size60–80 mesh typical; customized PSD available by project
Bulk densityTypical range 0.45–0.65 g/mL, or customer-defined range when required
SolubilityFreely soluble in water
pHAlkaline solution behavior, typically verified in 1% solution
Residual solventsNot a solvent-extracted ingredient; confirmed according to process route and agreed specification
Pesticide residuesAvailable when required by customer or destination market
Foreign matterConforms to visual and sieving controls
Heavy MetalsTypical Limit
Lead≤0.5 ppm or customer-specific limit
Arsenic≤0.5 ppm or customer-specific limit
Cadmium≤0.5 ppm or customer-specific limit
Mercury≤0.1 ppm or customer-specific limit
Microbiological ItemTypical Limit
Total plate count≤1,000 CFU/g
Yeast and mold≤100 CFU/g
Coliforms≤10 CFU/g
E. coliNegative / 10 g
SalmonellaNegative / 25 g
Staphylococcus aureusNegative / 10 g
Product-Specific Quality IndicatorWhy It Matters
Anhydrous-basis assaySupports accurate mg-per-serving calculations and cost-in-use comparison
Free-base confirmationHelps distinguish the material from L-Lysine HCl and other lysine salt forms
Water activityHelps predict caking, flow loss, and hopper bridging during humid storage
Particle size distributionSupports blend uniformity, feeder accuracy, and segregation control
Bulk densityImportant for capsule filling, sachet filling, tableting blends, and premix dosing
pH behaviorCritical for beverage, gummy, and flavored powder development
Related substancesSupports purification consistency and sensory repeatability
Odor and colorHelps monitor batch-to-batch consistency before blending

Batch Release & Quality Review

Each batch may be reviewed before release through identity confirmation, source traceability, manufacturing record verification, assay review, and comparison against the agreed specification. For L-Lysine Base Powder, QA review commonly focuses on anhydrous-basis assay, free-base identity, L-form confirmation, loss on drying, water activity, residue on ignition, particle size, bulk density, microbiology, heavy metals, odor, color, and appearance. Retained samples may be stored for traceability and batch-to-batch comparison. COA consistency is checked against the specification sheet, while optional tests such as PSD profile, chloride level, expanded microbiology, pesticide residues, and third-party heavy metal testing can be arranged when required by the buyer’s QA program or destination market.

Features & Benefits

L-Lysine Base Powder is a free-base amino acid ingredient used by manufacturers that need high lysine contribution, controlled assay, and flexible documentation for supplement production. Compared with L-Lysine HCl, the free-base form provides higher lysine contribution per gram and avoids added chloride, but it also contributes stronger alkaline pH behavior. This makes specification review and pilot testing important before commercial production.

For procurement and QA teams, the most important controls are assay basis, identity, moisture, water activity, particle size, bulk density, pH behavior, microbiology, heavy metals, and sensory consistency. These factors affect blend uniformity, powder flow, capsule fill weight, tablet compression, beverage pH adjustment, caking risk, and sample-to-bulk consistency. A specification lock before repeat bulk orders helps reduce reformulation, re-testing, and production-line interruptions.

For formulators, the material’s value is not only its assay level but also its processing behavior. Low water activity supports better storage performance in sachets and powder blends. PSD control reduces segregation in multi-ingredient systems. Bulk density control improves feeder accuracy and capsule or sachet filling repeatability. Related-substance monitoring can also help manage taste drift between batches.

Custom specification support can include tighter assay limits, particle size adjustment, density targeting, low-aw control, expanded microbiology, market-specific heavy metals, and project-specific documentation. For beverage, gummy, and bar systems, acid-buffer design, flavor masking, browning risk, and real-process stability should be confirmed through pilot testing.

Applications & Formulation Ideas

Primary Application Formats

FormatPractical Formulation Notes
CapsulesSuitable when assay, bulk density, and PSD match capsule size and filling equipment. Inclusion should be calculated from target lysine contribution and confirmed assay.
TabletsCan be used in compressed tablets, but flow, hardness, friability, disintegration, and moisture sensitivity should be validated during pilot trials.
Powder blendsSuitable for amino acid blends, plant protein systems, and functional premixes. PSD and density matching reduce segregation during transport and filling.
Stick packs and sachetsUseful where high lysine contribution is needed in limited serving size. Low aw and moisture-barrier packaging are recommended.
Beverage powdersFreely soluble in water, but alkaline pH and bitterness require acid, buffer, flavor, and sweetener design.
Private label supplement projectsSuitable for capsules, tablets, sachets, powder blends, beverage powders, and custom amino acid premixes requiring COA and specification alignment.

Application Formats Requiring Extra Testing

FormatExtra Testing Recommended
RTD drinksCheck pH shift, clarity, haze, taste stability, microbiology compatibility, mineral interactions, and full dissolution behavior.
GummiesTest pH, gel strength, browning tendency, flavor masking, water activity, and compatibility with acids, pectin, gelatin, sweeteners, and minerals.
Functional barsEvaluate Maillard browning risk, flavor drift, moisture migration, texture change, and reducing-sugar compatibility during heat or storage.
Effervescent powdersConfirm pH reaction profile, taste, CO₂ release behavior, moisture protection, and packaging barrier requirements.
Mineral-heavy blendsCheck haze, precipitation, bitterness, pH movement, and flow behavior when combined with calcium, magnesium, zinc, or iron compounds.
Heat-processed nutrition formatsValidate under real processing temperature and holding time because free amino groups may increase browning in reducing-sugar systems.

Formulation Notes

  1. For plant protein blends, prototype inclusion is often evaluated around 0.5–3.0% depending on target lysine contribution, protein source, serving size, and sensory tolerance.
  2. For beverage powders, prototype inclusion is often evaluated around 0.1–0.8%, with acid-buffer adjustment required at higher levels.
  3. For capsules and tablets, calculate inclusion from confirmed anhydrous-basis assay, then validate fill weight, content uniformity, hardness, friability, and disintegration.
  4. L-Lysine Base Powder is alkaline; add it after the acid-buffer system is established in liquid prototypes to avoid localized high-pH zones.
  5. Bitter and alkaline notes are usually better managed through acid pairing, citrus or berry flavors, and layered sweetener systems rather than sweetness alone.
  6. In reducing-sugar formulas, monitor browning and flavor change during heat processing and accelerated stability evaluation.
  7. If the finished blend contains proteins or minerals, confirm dispersion and re-check pH after the system has fully hydrated.
  8. For high-speed filling, request particle size and bulk density targets instead of relying only on mesh size.
  9. For sachets and stick packs, low water activity, moisture-barrier film, and short open-time handling help reduce caking.
  10. For contract manufacturing, retain the same release criteria from sample to bulk order to reduce scale-up variability.
  11. For powder premixes, pre-blending with a compatible matrix ingredient may improve uniformity when PSD or density differences are significant.
  12. Application-specific testing is recommended before commercial launch, especially for RTD drinks, gummies, bars, and heat-processed formats.

Packaging, Storage & Logistics

ItemB2B Supply Information
Sample packingSmall sample packs available for lab evaluation, formulation trials, sensory review, pH testing, and QA approval
Bulk inner packingFood-grade polyethylene inner bags or double liners for moisture protection
Bulk outer packingFiber drum or carton packaging, typically 25 kg net per unit depending on logistics requirement
Label informationProduct name, batch number, net weight, manufacture date, expiry or retest date, storage conditions, and origin information
PalletizationExport palletization available; pallet pattern and stretch wrapping confirmed according to shipping route
Shelf lifeTypically 24 months in sealed original packaging under recommended storage conditions
Storage conditionsStore in a cool, dry, well-ventilated area away from direct sunlight, moisture, strong odors, and incompatible materials
Humidity controlKeep packaging sealed; avoid humid staging areas; desiccant strategy can be discussed for long sea freight or humid destinations
Temperature controlAmbient shipping is typically suitable when packaging integrity and humidity control are maintained
Shipping optionsCourier samples, air freight for urgent orders, and sea freight for bulk shipments
Export documentsCommercial invoice, packing list, COA, SDS, origin-related documents, and other project-specific export documents available upon request
Long-distance shippingDry container conditions, liner integrity, pallet stability, and moisture protection should be reviewed for long-distance routes
Handling after openingReseal immediately, minimize open time, avoid repeated exposure to humid air, and use clean dry tools during sampling or repacking

MOQ, Lead Time, Documents & Inquiry

ItemSupply Information
Standard MOQTypically 25 kg for trial orders; production MOQ confirmed according to specification, testing scope, and packaging
Sample policySamples available for formulation, sensory, solubility, pH, tableting, and QA evaluation
Standard lead timeTypically 10–15 business days for standard specification after order confirmation, subject to stock and testing schedule
Custom specification lead timeAdditional time may be required for custom PSD, density targeting, expanded microbiology, market-specific heavy metals, or third-party testing
Bulk supply supportSupports pilot, scale-up, distributor, contract manufacturing, and recurring bulk supply programs
Custom manufacturing supportAssay confirmation, particle size customization, low-aw control, blend development, and application-specific release criteria can be discussed
OEM / private label supportSuitable for amino acid blends, capsules, tablets, sachets, beverage powders, and private label supplement projects
Available documentsCOA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related documents
Testing supportHPLC assay, identity testing, moisture, water activity, particle size, bulk density, microbiology, heavy metals, and optional third-party testing
Buyer information requiredTarget specification, application format, order quantity, destination market, document checklist, packaging needs, and testing requirements

For a quotation on L-Lysine Base Powder, please provide your target specification, application format, order quantity, destination market, required documents, testing requirements, packaging needs, and expected timeline. This allows the technical and quality teams to confirm the most suitable grade, COA scope, lead time, sample arrangement, and bulk supply plan.

Request Ingredient Specs & Quote

Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.

Related Ingredients for Formulation

Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.