L-Tyrosine Powder crystalline amino acid ingredient

L-Tyrosine Powder

L-Tyrosine Powder is a high-purity L-form amino acid ingredient for capsules, tablets, sports nutrition powders and amino acid premixes. Typically supplied at ≥98.5% assay with 60–100 mesh options and limited neutral-water solubility, it supports B2B supplement manufacturing with consistent specifications, technical documentation, formulation flexibility and reliable commercial supply.

Top Key Specs

ItemTypical B2B Specification
Product NameL-Tyrosine Powder
Chemical NameL-2-Amino-3-(4-hydroxyphenyl)propanoic acid
CAS No.60-18-4
Molecular FormulaC9H11NO3
Molecular WeightApproximately 181.19 g/mol
Ingredient CategoryAmino acid ingredient
Production RouteConfirmed according to selected source, project and lot documentation
GradeFood / supplement grade
Specification / AssayTypically ≥98.5% or according to agreed specification
Assay MethodHPLC or agreed analytical method
AppearanceWhite to off-white crystalline powder
Odor / TasteCharacteristic; mild to slightly bitter
CarrierTypically carrier-free; custom premix or modified grades available by project
Particle SizeCommonly 60–100 mesh; custom PSD or D90 target can be evaluated
SolubilityLimited solubility in neutral water
Loss on DryingControlled according to agreed specification
Residue on IgnitionControlled according to agreed specification
Bulk DensityReported when required
Heavy MetalsControlled according to agreed specification or destination-market requirements
MicrobiologyControlled according to agreed specification
Shelf LifeTypically 24 months in unopened original packaging
StorageStore sealed in a cool, dry and odor-free area away from humidity, heat and direct light

Commercial sourcing should consider both chemical quality and physical performance. Assay and identity support qualification, while particle size, density and limited neutral-water solubility can influence downstream handling and finished-format selection.

Typical COA Limits

Physical / Chemical ParameterTypical Limit / Control
AppearanceWhite to off-white crystalline powder
IdentificationConforms by FTIR, HPLC retention time or agreed identity method
AssayTypically ≥98.5% or according to agreed specification
Related SubstancesControlled by HPLC according to project requirements
Specific Optical RotationAvailable when L-form confirmation is required
Loss on DryingTypically ≤0.5% or according to agreed specification
Residue on IgnitionTypically ≤0.1% or according to agreed specification
Particle Size60–100 mesh typical; custom PSD available by project
Bulk DensityReported when required
Water ActivityAvailable for caking-sensitive projects
Residual SolventsControlled according to production route and specification

Heavy Metals

ParameterTypical Limit
Lead≤1.0 ppm or customer-specific limit
Arsenic≤1.0 ppm or customer-specific limit
Cadmium≤0.5 ppm or customer-specific limit
Mercury≤0.1 ppm or customer-specific limit

Microbiological Parameters

ParameterTypical Limit
Total Plate Count≤10,000 CFU/g or agreed limit
Yeast and Mold≤100 CFU/g or agreed limit
E. coliNegative / 10 g
SalmonellaNegative / 25 g
Staphylococcus aureusNegative / 10 g when required

Product-Specific Quality Controls

IndicatorB2B Relevance
L-Form IdentitySupports stereochemical confirmation when required
Particle-Size DistributionInfluences blending, capsule filling and tablet compression
Bulk / Tapped DensitySupports filling settings and dosage consistency

Batch Release & Traceability

Commercial lots should be released against the agreed specification rather than assay alone. Batch-specific COAs and retained samples can support supplier qualification, repeat-order comparison and investigation of material or finished-product performance differences.

Features & Benefits

  • High-purity L-form supply: Typically controlled to ≥98.5% assay or an agreed customer specification.
  • Carrier-free option: Standard powder is typically supplied without added carriers unless a modified grade is requested.
  • Controlled particle size: 60–100 mesh material is available with custom PSD evaluation by project.
  • Low-solubility formulation awareness: Suitable finished formats should consider its limited neutral-water solubility.
  • Custom specification support: Assay, particle size, density and selected physical parameters can be reviewed according to purchasing requirements.

For B2B buyers, the main value lies in matching chemical quality with the physical requirements of the intended manufacturing process.

Applications & Formulation Ideas

ApplicationPractical Formulation Guidance
CapsulesReview fill density, flowability and fill-weight variation during pilot encapsulation.
TabletsEvaluate density, compressibility, lubricant response and excipient compatibility before scale-up.
Powder BlendsMatch particle size and density with amino acids, flavors, sweeteners, minerals and active ingredients.
Sports Nutrition PowdersEvaluate blend uniformity, serving consistency and sensory masking.
Stick Packs / SachetsConfirm caking resistance, humidity exposure and moisture-barrier packaging.
Beverage PowdersDesign for dispersion or suspension rather than clear dissolution because neutral-water solubility is limited.
GummiesEvaluate particle distribution, visible speckling and taste masking under actual processing conditions.
Chewable TabletsReview bitterness, texture and compression behavior during prototype development.
Amino Acid PremixesUse controlled preblending where particle size or density differs significantly from other ingredients.

Formulation Notes

  • Balance particle size between flowability, blend uniformity and dust control.
  • Use staged preblending when combining L-Tyrosine with low-dose vitamins, minerals, caffeine, flavors or other active ingredients.
  • Evaluate sedimentation, re-shake behavior and mouthfeel for suspension-style beverage systems.
  • Confirm mixer type, blending time, sieve step and packaging-line conditions before commercial scale-up.
  • Align incoming QA with the approved raw-material specification and intended dosage form.

L-Tyrosine vs N-Acetyl L-Tyrosine

L-Tyrosine is the free amino acid, while N-Acetyl Tyrosine Powder is an acetylated derivative with a different chemical identity and formulation profile.

Buyers should compare specification, water behavior and finished-format requirements before selecting a tyrosine source. The two materials should be managed as separate raw materials.

Packaging, Storage & Logistics

ItemTypical B2B Arrangement
Sample PackingSealed sample bags or bottles for evaluation and supplier approval
Bulk Inner PackingFood-grade polyethylene liner; double liner available when required
Bulk Outer PackingTypically 25 kg carton, fiber drum or project-specific export packing
Label InformationProduct name, lot number, net weight, production date and storage conditions
PalletizationExport palletization and protective wrapping available
Shelf LifeTypically 24 months in unopened original packaging
Storage ConditionsStore sealed in a cool, dry and odor-free location
Humidity ControlProtect from moisture and reseal promptly after opening
Shipping OptionsAir, sea, courier sample shipment and consolidated export shipment
Export DocumentsCommercial invoice, packing list, COA, SDS and specification documents

Protect L-Tyrosine Powder from moisture during storage, repacking and transportation. For long-distance or humid routes, confirm liner, outer packing and pallet protection before shipment.

MOQ, Lead Time, Documents & Inquiry

ItemTypical Support
Standard MOQUsually starts from 25 kg for bulk packing; pilot quantities can be discussed
Sample PolicySamples available for evaluation, supplier approval and formulation trials
Standard Lead TimeCommonly 7–15 business days after specification and order details are confirmed
Custom SpecificationAdditional time may be required for PSD adjustment, added testing or document preparation
Bulk SupplyCommercial supply for manufacturers, distributors, importers and formulation projects
Documents & ComplianceBatch-specific COA, TDS, SDS, specification sheet and applicable allergen, GMO, gluten, vegan, irradiation and origin statements
Testing SupportTesting scope can be aligned with agreed specifications and target-market requirements
Independent VerificationThird-party testing or applicable certification evidence can be reviewed when required
Buyer Information RequiredTarget specification, application, quantity, destination market, testing scope, documents, packaging and timeline

Testing methods, third-party reports and certification scope should be confirmed for the selected source and project. Buyers requiring qualification documents can review Essencefield’s Testing & Certifications process before sampling or commercial approval.

For quotation or supplier approval, provide the target specification, finished format, estimated quantity, destination market, required testing, documents, packaging and procurement timeline through Contact Essencefield.

Request Ingredient Specs & Quote

Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.

Related Ingredients for Formulation

Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.