
Lactic Acid Bacteriocin Powder is a fermentation-derived preservative ingredient supplied for activity-controlled food systems. It is considered for sauces, brines, prepared foods, and dry seasoning blends where defined activity, carrier compatibility, and pH review are important. The powder supports premix dosing or direct dispersion after validation with the target matrix, process conditions, regional additive requirements, and commercial batch release criteria.
| Item | Typical B2B Specification |
|---|---|
| Product name | Lactic Acid Bacteriocin Powder |
| Common reference names | Lactic acid bacteria bacteriocin, nisin-type bacteriocin powder, fermentation-derived bacteriocin ingredient |
| Ingredient category | Fermentation-derived food ingredient / bio-preservation support ingredient / formulation ingredient |
| Source or raw material origin | Produced through controlled lactic acid bacteria fermentation; exact active bacteriocin type, strain background, substrate, and carrier system confirmed by project specification |
| Processing method | Fermentation, liquid-solid separation, concentration, activity standardization, carrier blending, drying, sieving, and final batch blending |
| Standard specification | Typically standardized by biological activity in IU/g; common commercial grades may include 10,000–20,000 IU/g, with custom grades confirmed by project |
| Assay / activity basis | Activity is usually determined by a defined bioactivity method such as agar diffusion or turbidimetric assay with internal reference controls |
| Identity control | Activity confirmation, fermentation batch record, and peptide fingerprint profile available when required for supplier approval |
| Active type confirmation | Exact bacteriocin type, activity grade, assay method, and carrier system are confirmed according to the agreed project specification |
| Grade | Food grade; finished-product suitability should be reviewed according to application format and destination market requirements |
| Appearance | Off-white to pale yellow fine powder |
| Odor and taste | Characteristic mild fermentation-like odor; slightly salty or characteristic taste depending on carrier |
| Carrier system | Sodium chloride is commonly used for activity stabilization and metering; maltodextrin or other carrier systems can be reviewed for specific projects |
| Particle size | Typically 80–120 mesh; finer, standard, or dust-managed particle size can be discussed for blending, dosing, tablet, or sachet use |
| Solubility / dispersibility | Best dispersed in acidified water, commonly around pH 2.5–3.5; neutral systems require application-specific testing |
| pH behavior | Activity and dispersion are pH-dependent; acidic systems are generally easier to standardize than neutral, protein-rich, or highly buffered systems |
| Moisture | Typically controlled at ≤5.0%, or according to agreed specification |
| Water activity | Controlled for dry-powder stability; tighter limits can be arranged for activity-sensitive projects |
| Residue on ignition / ash | Influenced by carrier level and mineral salt content; reported according to agreed specification |
| Bulk density | Lot-reported for filling, feeder setup, and blend development; commonly evaluated during pilot production |
| Flowability | Carrier-stabilized powder suitable for premix handling; anti-caking or granulation strategy can be reviewed when required |
| Heavy metals | Pb, As, Cd, and Hg tested according to agreed specification and destination market requirements |
| Microbiology | Total plate count, yeast and mold, coliforms, E. coli, Salmonella, and Staphylococcus aureus tested according to agreed specification |
| Stability | Sensitive to humidity, high-temperature storage, protease exposure, and uncontrolled neutral-pH heat processing |
| Application compatibility | Acidified sauces, brines, cheese systems, plant-based analogs, beverage powders, premixes, sachets, tablets, gummies, and private label projects after validation |
| Color impact | Low visual impact in most dry blends; pale yellow tone may be noticeable in white, transparent, or low-color systems |
| Flavor impact | Low to moderate depending on activity grade, carrier, sodium contribution, dose, pH, and finished matrix |
| Shelf life | Typically 24 months unopened under recommended conditions; final shelf life confirmed by lot and packaging specification |
| Origin | China |
| Manufacturing location | China |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and supplier approval documents upon request |
The following COA items are typical for Lactic Acid Bacteriocin Powder projects. Final release limits, test methods, and optional items should be aligned with the buyer’s application format, target activity grade, destination market, and supplier approval checklist.
| Physical & Chemical Parameter | Typical Project Limit / Control |
|---|---|
| Appearance | Off-white to pale yellow powder |
| Odor | Characteristic, without abnormal odor |
| Particle size | Typically 80–120 mesh, or according to agreed specification |
| Moisture / loss on drying | Typically ≤5.0%, or according to agreed specification |
| Water activity | Controlled according to agreed specification when required |
| Bulk density | Lot-reported for production reference |
| pH behavior | Dispersibility checked under defined acidic conditions when included |
| Residue on ignition / ash | Controlled according to carrier system and agreed specification |
| Carrier composition | Sodium chloride, maltodextrin, or agreed carrier system; percentage reported when required |
| Identity, Activity & Product-Specific Control | Typical Project Limit / Control |
|---|---|
| Identification | Conforms to agreed bacteriocin activity profile and identity method |
| Activity / potency | Lot-defined IU/g, commonly 10,000–20,000 IU/g or customized grade |
| Activity method | Agar diffusion, turbidimetric assay, or agreed internal method |
| Peptide fingerprint | HPLC fingerprint or equivalent profile available when required |
| Active type confirmation | Confirmed by agreed specification, supplier approval request, or project-specific documentation |
| Fermentation lot traceability | Batch record available for internal QA review and supplier approval support |
| Dispersibility in acidic medium | Available when required for beverage, sauce, brine, or liquid premix projects |
| Heat-retention screening | Available for acidic heat-process projects when required |
| Protease compatibility review | Recommended for enzyme-containing systems; tested by project |
| Residual solvents | Not typically expected from standard aqueous fermentation processing; test scope available when required |
| Pesticide residues | Not a routine botanical-style item; carrier or market-specific testing can be reviewed when required |
| Microbiology | Typical Project Limit |
|---|---|
| Total plate count | Commonly ≤10,000 CFU/g, or according to agreed specification |
| Yeast and mold | Commonly ≤100 CFU/g, or according to agreed specification |
| Coliforms | Commonly ≤10 CFU/g, or according to agreed specification |
| E. coli | Negative / 1 g, or according to agreed specification |
| Salmonella | Negative / 25 g, or according to agreed specification |
| Staphylococcus aureus | Negative / 1 g, or according to agreed specification |
| Heavy Metals | Typical Project Limit |
|---|---|
| Lead | Commonly ≤1.0 mg/kg, or according to destination market requirements |
| Arsenic | Commonly ≤1.0 mg/kg, or according to destination market requirements |
| Cadmium | Commonly ≤0.5 mg/kg, or according to destination market requirements |
| Mercury | Commonly ≤0.1 mg/kg, or according to destination market requirements |
Each batch may be reviewed before release through fermentation lot traceability, raw material and carrier confirmation, identity record, activity testing, moisture, water activity, particle size, ash or residue on ignition, microbiology, heavy metals, appearance, odor, and COA consistency. When required, the QA review can include acidic dispersion behavior, HPLC fingerprint comparison, heat-retention screening, third-party testing, retained sample inspection, and batch-to-batch trend review. Lactic Acid Bacteriocin Powder should not be approved only by an IU/g value because carrier system, pH behavior, moisture control, matrix binding, and storage conditions can affect practical formulation performance. Retained samples, batch numbering, internal batch records, pre-shipment sample options, and specification records support supplier approval, complaint investigation, repeat-order matching, and distributor documentation review.
| Format | Formulation Guidance |
|---|---|
| Acidified sauces and dressings | Commonly evaluated where pH, salt, water activity, packaging, and process hygiene are managed together. Prototype screening may start around 500–2,000 IU/kg, then adjust based on finished-matrix testing. Pre-disperse in acidified water before emulsification or viscosity build. |
| Brines and marinades | Salt-carrier grades often fit brine systems because ionic strength is already part of the formula. Confirm sodium contribution, pH, process temperature, and contact time. Add after full dispersion to avoid localized concentration differences. |
| Cheese and processed cheese systems | Protein and fat binding may reduce available activity, so water-only testing is not sufficient. Pilot trials should evaluate effective IU/kg, process timing, heat exposure, and finished-product micro trend data. |
| Plant-based analogs | Stabilizers, plant proteins, emulsifiers, and pH buffers may influence dispersion and availability. Add before final thickening where possible and validate behavior in the complete formula. |
| Chilled ready-to-eat food systems | Should be evaluated as part of a broader hurdle design that may include pH, water activity, salt, sanitation, packaging barrier, and cold-chain control. Buyer-led screening or challenge testing may be required. |
| Beverage powders and dry premixes | Best suited when the final beverage is acidic and has a defined reconstitution method. Flowability, particle size, carrier taste, turbidity, and compatibility with acids should be checked during pilot blending. |
| Stick packs and sachets | Fine, uniform particle size supports blend distribution, but humidity control is critical. Use moisture-barrier packaging and validate homogeneity when inclusion levels are low. |
| Gummies and pectin systems | Acidic gummy bases may be technically compatible, but heat exposure, pH, moisture, flavor impact, and post-cook addition timing require extra validation. |
| Capsules | Suitable for dry dosage formats where activity, carrier level, particle size, bulk density, and blend uniformity are defined. Geometric dilution is recommended when the inclusion level is low. |
| Tablets | Can be evaluated for direct compression or granulation projects. Compression force, moisture exposure, lubricant compatibility, and activity retention should be checked before commercial production. |
| Format / Condition | Why Extra Testing Is Recommended |
|---|---|
| Neutral or near-neutral pH systems | Dispersion and activity retention are less predictable than in acidic systems; process-matched testing is recommended. |
| High-protein or high-fat matrices | Matrix binding can reduce the available active fraction, requiring effective IU/kg validation in the real formula. |
| Long hot-hold or pasteurization steps | Activity retention depends on pH, time, temperature, and addition point; pre/post-process potency checks are recommended. |
| Protease-containing formulas | Active proteases may degrade peptide activity; compatibility testing should be completed before scale-up. |
| High-viscosity systems | Late addition may cause poor distribution. Add before final viscosity development or use a validated premix route. |
| Clear beverages | Color, turbidity, carrier taste, and sedimentation should be checked under the final pH and process condition. |
| Low-dose premixes | Blend uniformity and analytical recovery are important because small weighing errors can affect effective IU/kg. |
| Long-distance export projects | Temperature and humidity excursions may affect activity; packaging and freight planning should be reviewed before shipment. |
| Item | B2B Supply Details |
|---|---|
| Sample packing | Typically 100 g, 500 g, or 1 kg foil-laminate sample bags for R&D evaluation, supplier approval, and pilot testing |
| Bulk inner packing | Food-grade polyethylene or foil-laminate inner bag with moisture-barrier protection |
| Bulk outer packing | 25 kg fiber drum, carton, or agreed export carton depending on order quantity and shipping route |
| Label information | Product name, lot number, net weight, manufacture date, retest or expiry date, storage condition, and country of origin |
| Palletization | Export palletization available; carton and drum stacking should protect seals and prevent compression damage |
| Shelf life | Typically 24 months unopened under recommended storage conditions; confirmed by lot and packaging specification |
| Storage conditions | Store sealed, cool, dry, and protected from light; refrigerated storage at 2–8°C is preferred for long-term activity retention |
| Humidity control | Use high-barrier packaging, desiccant for partial-use operations, and defined open-bag handling SOPs |
| Temperature control | Avoid prolonged heat exposure during warehousing and transit; temperature-managed freight can be reviewed for long routes |
| Shipping options | Air, sea, courier sample shipment, or consolidated export shipment depending on order quantity and urgency |
| Export documents | Commercial invoice, packing list, COA, SDS, certificate of origin, and destination-specific documents when required |
| Long-distance shipping | Route, season, container temperature, transit time, and warehouse conditions should be considered for activity-sensitive projects |
| Handling after opening | Reseal immediately, minimize open time, prevent moisture exposure, avoid wet-contact tools, and record partial-bag use |
| Item | B2B Supply Details |
|---|---|
| Sample packing | Typically 100 g, 500 g, or 1 kg foil-laminate sample bags for R&D evaluation, supplier approval, and pilot testing |
| Bulk inner packing | Food-grade polyethylene or foil-laminate inner bag with moisture-barrier protection |
| Bulk outer packing | 25 kg fiber drum, carton, or agreed export carton depending on order quantity and shipping route |
| Label information | Product name, lot number, net weight, manufacture date, retest or expiry date, storage condition, and country of origin |
| Palletization | Export palletization available; carton and drum stacking should protect seals and prevent compression damage |
| Shelf life | Typically 24 months unopened under recommended storage conditions; confirmed by lot and packaging specification |
| Storage conditions | Store sealed, cool, dry, and protected from light; refrigerated storage at 2–8°C is preferred for long-term activity retention |
| Humidity control | Use high-barrier packaging, desiccant for partial-use operations, and defined open-bag handling SOPs |
| Temperature control | Avoid prolonged heat exposure during warehousing and transit; temperature-managed freight can be reviewed for long routes |
| Shipping options | Air, sea, courier sample shipment, or consolidated export shipment depending on order quantity and urgency |
| Export documents | Commercial invoice, packing list, COA, SDS, certificate of origin, and destination-specific documents when required |
| Long-distance shipping | Route, season, container temperature, transit time, and warehouse conditions should be considered for activity-sensitive projects |
| Handling after opening | Reseal immediately, minimize open time, prevent moisture exposure, avoid wet-contact tools, and record partial-bag use |
| Item | Supply Support |
|---|---|
| Standard MOQ | Typically 25 kg for bulk supply; smaller trial quantities may be available for qualification projects |
| Sample policy | Samples can be arranged for R&D testing, pilot production, supplier approval, and documentation review |
| Pre-shipment sample | Available when required for buyer confirmation before bulk dispatch |
| Standard lead time | Commonly 7–10 working days for available standard grades after order confirmation |
| Custom specification lead time | Usually 2–3 weeks or confirmed by project for custom IU/g grade, carrier selection, particle size, or tighter limits |
| Bulk supply support | Lot reservation, repeat-order planning, export packing, retained sample support, and batch-to-batch comparison |
| Custom manufacturing support | Activity adjustment, active type confirmation, carrier customization, particle size control, blend development, and project-specific COA items |
| OEM / private label support | Ingredient supply, formulation discussion, document preparation, and contract manufacturing support for qualified projects |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related documents |
| Testing support | Activity testing, identity confirmation, moisture, water activity, particle size, microbiology, heavy metals, carrier verification, dispersibility, and heat-retention screening when required |
| Buyer quotation details | Target specification, active bacteriocin type if required, activity grade, application format, order quantity, destination market, packaging needs, testing requirements, and document checklist |
For Lactic Acid Bacteriocin Powder bulk supply, please provide the target specification, active type requirement if applicable, application format, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline. Our technical sales and QA team can review the formulation route, confirm available grade options, and prepare a quotation with COA, TDS, SDS, supplier approval documents, and project-specific testing support.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.