

Magnesium Oxide Powder is an inorganic mineral ingredient for tablets, capsules, dry blends and mineral premixes. It provides a high theoretical elemental-magnesium contribution while remaining practically insoluble in water. Essencefield supports specification review, sample qualification, batch COA verification and bulk supply for supplement brands, contract manufacturers, importers and distributors serving international nutrition markets and commercial sourcing programs.
| Item | B2B Specification |
|---|---|
| Product Name | Magnesium Oxide Powder |
| CAS Number | 1309-48-4 |
| Molecular Formula | MgO |
| Molecular Weight | 40.30 g/mol |
| Available Grade | Confirmed against the intended application and purchase specification |
| Assay as MgO | Grade-defined target with the actual result reported per batch |
| Theoretical Elemental Magnesium | Approximately 60.3%; calculations should use the actual assay and LOI |
| Appearance | White to off-white powder |
| Solubility | Practically insoluble in water; forms a suspension and reacts with acids |
| Particle Size | Mesh, sieve-residue or D90-controlled options available by project |
| Bulk Density | Grade-dependent; a target range can be defined for filling or premix applications |
| Loss on Ignition | Controlled against the approved specification |
| Main Applications | Tablets, capsules, dry blends, mineral premixes and sachets |
| Packaging | 25 kg bulk packaging; samples and alternative formats available |
| Shelf Life | Typically 24 months unopened under controlled dry storage |
| Storage | Keep sealed in a cool, dry and ventilated area away from moisture and acids |
Magnesium oxide should not be selected by assay alone. Particle size, bulk density and loss on ignition affect filling volume, powder flow, blend uniformity and compression behavior. Fine material may distribute efficiently through a premix but can increase dust, cohesion and poor hopper flow. A denser grade occupies less capsule or tablet space, although large density differences can increase segregation from lighter vitamins, flavors, fibers or botanical powders.
Buyers should define the assay basis, particle-size range, density window, LOI and impurity limits before approving a sample. Commercial batches should follow the same specification and test methods used during formulation trials. Incoming review should match the product name, source, batch number, COA and packaging condition to the approved material. Essencefield’s raw material quality process connects supplier qualification, specification review, incoming inspection, material release and traceability. This helps purchasing and QA teams distinguish chemical compliance from processing suitability and reduces avoidable changes during scale-up, filling, compression and repeat production.
This table provides a grade-dependent purchasing framework. Final numerical limits and analytical methods should be confirmed in the approved specification.
| Category | Test Item | Typical Control |
| Identity | Appearance | White to off-white powder |
| Identity | Identification | Conforms to the agreed analytical method |
| Core Chemistry | Assay as MgO | Grade-defined target; actual result reported per batch |
| Core Chemistry | Loss on Ignition | Controlled against the approved limit |
| Inorganic Purity | Acid-Insoluble Matter | Controlled where mineral impurity or grit is relevant |
| Inorganic Purity | Free Alkali | Tested when included in the approved specification |
| Inorganic Purity | Calcium Oxide | Tested when required for grade qualification |
| Inorganic Purity | Chloride | Controlled against the approved limit |
| Inorganic Purity | Sulfate | Controlled against the approved limit |
| Inorganic Purity | Iron | Reported or limited for color-sensitive applications |
| Physical Control | Particle Size | Agreed mesh, sieve residue or particle-size distribution |
| Physical Control | Bulk Density | Reported or controlled within an agreed range |
| Heavy Metals | Lead | Tested against the approved market-specific limit |
| Heavy Metals | Arsenic | Tested against the approved market-specific limit |
| Heavy Metals | Cadmium | Tested against the approved market-specific limit |
| Heavy Metals | Mercury | Tested against the approved market-specific limit |
| Microbiology | Total Plate Count | Meets the approved specification |
| Microbiology | Yeast and Mold | Meets the approved specification |
| Microbiology | Escherichia coli | Negative or within the approved requirement |
| Microbiology | Salmonella | Negative in the tested sample |
Assay and LOI should be reviewed together because moisture or volatile uptake can affect the calculated elemental-magnesium contribution. Particle size and bulk density do not determine chemical purity, but they influence flowability, filling volume, compression performance and blend uniformity. Heavy-metal limits should reflect the destination market, intended inclusion level and finished-product risk assessment rather than an unrelated generic mineral standard.
The batch COA should identify the material, batch number, analytical method, acceptance limit and actual result. QA teams should verify that it corresponds with the approved source and shipped lot. Essencefield’s testing and certifications framework supports COA and technical-document review, analytical testing coordination, third-party laboratory reports and certification-scope checks. Additional physical, chemical or microbiological testing can be defined where required for supplier qualification, registration or batch release.
High Magnesium Loading
Magnesium oxide provides approximately 60.3% theoretical elemental magnesium, helping formulators manage ingredient mass in space-limited tablets, capsules and mineral premixes. Final inclusion calculations should use the actual batch assay.
Controlled Processing Performance
Particle size and bulk density can be aligned with blending, hopper flow, filling and compression requirements. Defining these physical properties reduces unexpected behavior when moving from samples to repeat commercial batches.
Suitable for Dry Dosage Formats
Its concentrated mineral profile and low water solubility make it particularly relevant to tablets, hard capsules, sachets, dry powder blends and concentrated premixes.
Batch Quality and Documentation
Each shipment can be supported by the applicable batch and technical documents for specification review, quality approval and lot traceability.
Because MgO is alkaline and practically insoluble, suspended or acidified systems require validation for settling, texture, acid demand and final pH.
Formulation should begin with the target elemental-magnesium quantity and actual MgO assay. Required material can be estimated by dividing target elemental magnesium by the verified elemental-magnesium fraction. Manufacturing overage and label calculations should be handled separately.
Physical grade must match the dosage form. Fine, low-density powder may aid geometric dilution but increase dust and cohesive flow; denser material reduces fill volume but may separate from lighter ingredients. For tablet supplement manufacturing, evaluate compressibility, lubricant sensitivity, hardness, friability and disintegration. For hard capsule manufacturing, review bulk or tapped density, flow, capsule size and fill-weight variation.
Because MgO is alkaline and practically insoluble, beverage suspensions and acidified systems require pilot testing for pH, sedimentation, redispersion, texture and flavor. Multi-mineral blends need controlled premixing and sampling because magnesium oxide can differ substantially in density from calcium, zinc, iron or vitamin carriers. The ranges below are starting points for feasibility trials, not nutritional or medical dosage recommendations. Final use levels should follow the approved formula, target-market requirements and finished-product testing.
| Application | Formulation Guidance |
| 1. Tablets | Evaluate approximately 5–40% according to magnesium target, tablet size and compression behavior. |
| 2. Hard Capsules | Calculate from actual assay; confirm capsule size, density, flow and fill-weight variation. |
| 3. Dry Powder Blends | Begin around 0.1–3.0% for feasibility trials and verify blend uniformity. |
| 4. Mineral Premixes | Evaluate approximately 1–15% according to dilution ratio and finished-product target. |
| 5. Sachets and Stick Packs | Match particle size and density with the powder base to reduce segregation and seal contamination. |
| 6. Direct-Compression Systems | Test hardness, friability, disintegration, lubricant level and compression force. |
| 7. Multi-Mineral Formulas | Add through a controlled premix when combining with calcium, zinc, iron or trace minerals. |
| 8. Multi-Source Magnesium Formulas | Pair with a more soluble magnesium salt when improved dispersion is required. |
| 9. Powdered Beverage Suspensions | Start around 0.05–0.5% and assess sedimentation, pH, mouthfeel and redispersion. |
| 10. Custom Mineral Premixes | Define dilution ratio, magnesium contribution and compatibility with other nutrients. |
Segregation risk: Match particle size where practical, use geometric dilution and minimize unnecessary transfers.
Solid-dosage processing risk: Review powder flow, compression response and filling consistency before scale-up.
Suspension risk: Use a suitable suspension system or consider a more soluble magnesium form when settling is unacceptable.
Acid-interaction risk: Calculate acid demand, control the order of addition and verify final pH after equilibration.
Synergy option 1: Combine MgO with a soluble magnesium salt to balance compact mineral loading and dispersion.
Synergy option 2: Incorporate MgO into a calcium, zinc or trace-mineral premix after confirming physical compatibility.
Process tip: Screen magnesium oxide and major dry ingredients through compatible mesh sizes before blending, then add low-dose components through a separate premix.
QA release tip: Confirm critical raw-material attributes, blend uniformity and finished-product performance using representative samples from the first commercial batch.
| Item | Supply Information |
| Sample Packaging | Small bags or bottles for formulation and supplier-qualification testing |
| Bulk Packaging | Carton, fiber drum or 25 kg multi-wall kraft bag with a protective inner liner |
| Palletization | Export palletization available according to shipment requirements |
| Shelf Life | Typically 24 months unopened under controlled dry storage |
| Shipping Modes | Courier samples, air freight, LCL, FCL and palletized sea freight |
| Long-Distance Protection | Moisture barriers, wrapping, desiccants and container protection when required |
Keep the material sealed in a cool, dry and ventilated warehouse. Protect it from humidity, acidic materials and direct contamination. Reseal the inner liner immediately after dispensing because moisture exposure may increase caking, alter LOI and reduce powder flow.
At receipt, inspect the packaging and seals, verify the lot number against the COA and allow cold shipments to equilibrate before opening. Retain a representative sample where required and apply first-expired, first-out inventory control. Export packing, shipping documents and freight coordination are available through global supply support.
| Item | Supply Information |
| Sample Availability | Samples available for formulation, document review and supplier qualification |
| MOQ | Starts from sample, carton or pallet quantities depending on grade and specification |
| Lead Time | Confirmed according to inventory, volume, packaging and document requirements |
| Custom Specification | Particle size, density, impurity limits and additional testing reviewed by project |
| Standard Documents | COA, product specification, TDS, SDS, origin information and applicable declarations |
| Supply Scope | Trial quantities, repeat batches, pallet shipments and container supply |
For quotation, provide:
Essencefield can review the specification, sample, testing scope, packaging and supply route before bulk approval. Product and certification documents should be verified against the exact source, facility, scope and validity period before order confirmation.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.