

Tricalcium Phosphate Powder, also known as TCP or calcium phosphate tribasic, is a white to off-white food and supplement ingredient used in tablets, capsules, sachets and dry premixes. Its low water solubility, particle size and bulk density can affect blending, filling and compression. Essencefield supports samples, technical documentation and bulk supply through approved manufacturing partners.
| Item | Specification Details |
|---|---|
| Product Name | Tricalcium Phosphate Powder |
| Chemical Formula | Ca₃(PO₄)₂; CAS information follows the approved SDS |
| Grade | Food or supplement grade according to the confirmed specification |
| Appearance | White to off-white fine powder |
| Calcium Content | Reported for formulation and label calculations where specified |
| Phosphorus Reporting | Reported as phosphorus or another agreed basis |
| Solubility | Poorly soluble in water; used mainly as a dispersed mineral powder |
| Particle Size | Fine powder with mesh or laser PSD options available by grade |
| Bulk Density | Available for filling, dosing and compression evaluation |
| Main Functions | Calcium and phosphorus contribution for dry formulations |
| Shelf Life | Typically 24 months in unopened original packaging under recommended storage conditions |
Available TCP grades may differ in mineral reporting, particle-size distribution, bulk density, moisture and impurity controls. These differences can influence blend uniformity, powder flow, capsule fill weight and tablet compression even when the general ingredient name remains unchanged.
Formulation calculations should use the mineral values stated on the approved COA rather than theoretical composition alone. Because TCP is poorly soluble in water, beverage powders, gummies and other suspension-sensitive formats require additional evaluation for sedimentation, opacity, residue and mouthfeel.
The table below lists common quality-control items rather than guaranteed numerical limits. Final limits, units and analytical methods follow the signed specification for the approved grade.
| Test Item | Typical Control Direction |
| Appearance | White to off-white powder |
| Identification | Conforms to the approved identification method |
| Assay / Purity | Meets the approved commercial specification |
| Mineral Profile | Calcium and phosphorus reported on the agreed basis |
| Moisture | Controlled for storage stability and powder handling |
| Physical Properties | Particle size and bulk density conform to the approved grade |
| Fluoride | Included where specified |
| Heavy Metals | Controlled to agreed lead, arsenic, cadmium and mercury limits |
| Microbiology | Microbial counts and specified pathogens conform to the approved specification |
Material release should connect the manufacturing source, product identity, batch number, specification, COA and incoming inspection record. Essencefield’s raw material quality process includes supplier qualification, specification approval, document review, incoming inspection, material release and batch traceability.
Chemical assay alone does not confirm processing suitability. Particle-size distribution and bulk density can affect hopper flow, filling accuracy, segregation and compression without significantly changing the assay result. A finer grade may distribute more evenly in a mineral premix but increase dusting or poor flow. A coarser grade may handle more easily while increasing visible residue or grittiness.
Repeat orders should be compared with the approved specification, representative sample, earlier COAs and process observations. Independent verification can be coordinated through Essencefield’s testing and certification support when defined methods, limits or third-party reports are required.
| Application | Practical Formulation Guidance |
| Tablets | Evaluate flow, die filling, hardness, friability, disintegration and lubricant sensitivity during pilot compression. |
| Capsules | Confirm bulk density, particle size, capsule capacity, fill weight and blend uniformity. |
| Mineral Premixes | Match TCP particle size and density with vitamins and other minerals to reduce segregation. |
| Nutrition and Fortification Powders | Validate mineral recovery, powder flow, serving uniformity and sensory performance. |
| Sachets and Stick Packs | Test hopper flow, filling accuracy, dusting and performance after humidity exposure. |
| Suspension-Sensitive Formats | Beverage powders and gummies require testing for settling, opacity, residue, texture and pH interaction. |
TCP generally performs best in dry systems. Mixer design, material transfer, humidity and filling speed can change flow, segregation and compression behavior, so pilot trials should reproduce the intended commercial process before routine approval. Particle size should be evaluated together with density because the two properties influence powder movement and ingredient distribution differently.
Water-based and semi-solid applications require greater caution. TCP may disperse temporarily but can settle during holding or storage. Particle size, viscosity, pH and process holding time should therefore be evaluated together. Finished-product trials should assess sedimentation, visible residue, texture, mineral taste and serving uniformity rather than relying only on an initial dispersion test.
For projects requiring a different calcium profile, formulators can compare Calcium Citrate Powder for citrate-based systems. Multi-mineral formulas may also use Compound Minerals Powder to simplify sourcing and improve the distribution of low-dose ingredients.
| Item | Standard B2B Practice |
| Bulk Packing | Typically 25 kg with a food-grade polyethylene inner liner and fiber drum, carton or kraft-bag outer packaging |
| Label Information | Product name, batch number, net weight, production date, shelf life and storage conditions |
| Shelf Life | Typically 24 months in unopened original packaging |
| Storage | Keep sealed in a cool, dry and well-ventilated area |
| Moisture Protection | Protect from humidity, condensation and prolonged air exposure |
| Shipping Conditions | Normal ambient transport is generally suitable; confirm liner integrity and pallet protection for humid routes or extended storage |
| Handling After Opening | Reseal immediately and use clean, dry handling tools |
| Item | B2B Supply Information |
| Standard MOQ | Typically starts from 25 kg for standard bulk supply |
| Sample Support | Samples are available for formulation testing and supplier approval |
| Lead Time | Commonly 7–15 working days for an available specification and standard packaging |
| Specification & Testing Support | Product specifications and third-party testing can be reviewed after methods and limits are confirmed |
| Documents | COA, TDS, SDS, specification sheet and available supporting statements |
| Quotation Requirements | Application, grade, quantity, destination, packaging and document requirements |
Essencefield’s Xi’an-based team coordinates samples, documentation and bulk supply with approved manufacturing partners. For a quotation, provide the intended application, target specification, particle-size preference, quantity, destination market and required documents. Manufacturing source and certification scope are confirmed for the selected product. Request the representative COA, SDS and sample before commercial approval.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.