

Vitamin B5 Calcium Pantothenate Powder is a D-calcium pantothenate vitamin ingredient supplied as a white, free-flowing powder with low odor and practical water solubility. It suits multivitamin premixes, capsules, tablets, and selected gummy systems where clean handling is needed. Its calcium salt form supports accurate weighing, dry-blend dispersion, and scale-up without strong color or taste contribution to commercial finished formulas.
| Item | Typical B2B Specification |
|---|---|
| Product name | Vitamin B5 Calcium Pantothenate Powder |
| Common reference names | D-calcium pantothenate, calcium D-pantothenate, pantothenic acid calcium salt, Vitamin B5 powder |
| Ingredient category | Water-soluble vitamin ingredient for B-complex, multivitamin, premix, and fortified nutrition applications |
| Source or raw material origin | Synthetic vitamin salt; production source, manufacturing site, and origin documents confirmed by project |
| Chemical name | Calcium D-pantothenate |
| Standard specification | High-assay calcium pantothenate powder; final limits confirmed by approved purchase specification |
| Assay / purity | Typically 98.0–102.0% on dried basis, tested by agreed validated method |
| Grade | Food grade, supplement grade, or customer-specific grade according to destination market requirements |
| Appearance | White to off-white crystalline powder |
| Odor and taste | Mild characteristic odor and taste; lot sensory check available when required |
| Particle size | Standard mesh or customized particle size distribution for capsule, tablet, premix, sachet, and powder applications |
| Solubility / dispersibility | Readily soluble in water; solution clarity and dissolution behavior can be tested for beverage or liquid premix projects |
| pH behavior | Mild aqueous pH behavior; tested at agreed concentration when required |
| Loss on drying | Controlled to support assay correction, caking control, and storage stability |
| Residue on ignition | Controlled according to agreed specification |
| Bulk density | Lot-specific; available for filling, blending, tableting, and premix design |
| Flowability | Influenced by particle size, humidity exposure, powder handling, and transfer method |
| Carrier | Usually supplied as neat calcium pantothenate powder; carrier-based premix can be developed by project |
| Color impact | Low color impact in most dry systems; finished formula testing recommended |
| Flavor impact | Mild at typical formulation levels; sensory testing recommended for beverages, gummies, and flavored powders |
| Stability | Sensitive to excessive humidity; dry handling and moisture-barrier packaging are recommended |
| Application compatibility | Capsules, tablets, powder blends, sachets, stick packs, gummies, beverage powders, RTD drinks, bars, and vitamin premixes |
| Heavy metals | Tested according to agreed specification and destination market requirements |
| Microbiology | Tested according to agreed specification for food, supplement, or premix use |
| Shelf life | Typically 24–36 months unopened under recommended storage; confirmed by lot, packaging, and specification |
| Main applications | B-complex formulas, multivitamin systems, fortified nutrition powders, private label supplements, and contract manufacturing blends |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related documents |
| Physical / Chemical Item | Typical Control Approach |
|---|---|
| Appearance | White to off-white crystalline powder |
| Identification | Positive by agreed method, such as FTIR, HPLC, or compendial identity testing |
| Assay | Typically 98.0–102.0% on dried basis |
| Assay method | HPLC, titration, or other agreed validated method according to customer specification |
| Calcium content | Available when required for salt-form confirmation |
| Specific optical rotation | Available when chirality confirmation is required |
| Loss on drying | Controlled to support potency correction and caking-risk evaluation |
| Residue on ignition | Tested according to agreed specification |
| pH | Tested in aqueous solution at agreed concentration |
| Solution clarity | Available for beverage powder, RTD, syrup, or liquid premix applications |
| Particle size / mesh | Standard mesh or customized PSD for capsule filling, tablet processing, premix blending, and sachet packing |
| Bulk density | Reported when required for filling, blending, or dosing system evaluation |
| Related substances | Controlled by agreed specification when expanded purity review is required |
| Residual solvents | Tested when relevant to production route or customer specification |
| Pesticide residues | Not usually a primary risk for synthetic vitamin salts; market-specific testing can be arranged when required |
| Heavy Metals | Typical Limit Basis |
|---|---|
| Lead | Controlled according to agreed specification |
| Arsenic | Controlled according to agreed specification |
| Cadmium | Controlled according to agreed specification |
| Mercury | Controlled according to agreed specification |
| Total heavy metals | Available when required by customer specification or destination market |
| Microbiological Item | Typical Limit Basis |
|---|---|
| Total plate count | Tested according to agreed specification |
| Yeast and mold | Tested according to agreed specification |
| E. coli | Negative according to agreed method |
| Salmonella | Negative according to agreed method |
| Staphylococcus aureus | Available when required |
| Coliforms | Available when required |
Each batch may be reviewed against the approved specification, supplier approval file, purchase order requirements, and destination market documentation checklist before release. For Vitamin B5 Calcium Pantothenate Powder, key release items usually include identity, assay, loss on drying, residue on ignition, particle size, pH, appearance, odor, microbiology, heavy metals, and packaging integrity. When a buyer requires a deeper QA profile, calcium content, optical rotation, related substances, solution clarity, bulk density, and residual solvent review can be added according to the agreed specification. Release review may also include source confirmation, manufacturing record traceability, COA consistency, retained samples, previous-batch comparison, label verification, and shipping document review. These checks help supplement brands, importers, distributors, and contract manufacturers connect incoming quality control with production risks such as low-dose uniformity, caking, dusting, dissolution behavior, and finished-product specification compliance.
Vitamin B5 Calcium Pantothenate Powder is a defined vitamin salt suitable for B2B formulations that require controlled assay, consistent identity, and reliable dry processing behavior. As an ingredient manufacturer and bulk supplier, Essencefield supports projects where buyers need clear specification alignment, supplier approval documents, sample evaluation, and repeatable batch-to-batch quality control.
The material is commonly evaluated for B-complex formulas, multivitamin tablets, capsule blends, powder premixes, fortified drink powders, gummies, and private label supplement projects. Its water solubility supports beverage and liquid premix development, while its mild sensory profile helps formulators maintain cleaner flavor systems. Final performance should be verified in the buyer’s own matrix, especially when acidulants, minerals, sweeteners, flavors, heat, or moisture are present.
For manufacturing teams, particle size and bulk density are important because calcium D-pantothenate may be used at relatively low inclusion levels. A finer powder can support blend uniformity, while a controlled particle size distribution may improve flow and reduce dusting in larger premix systems. For tablet projects, compression behavior depends on the full formula and should be validated with selected excipients, binders, disintegrants, and lubricants.
For QA and procurement teams, documentation support may include COA, TDS, SDS, specification sheet, origin statement, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, and project-specific compliance files. Custom support can include particle size adjustment, assay alignment, expanded testing, moisture-controlled packaging, premix dilution, supplier approval support, and bulk order planning.
| Format | Formulation Guidance |
|---|---|
| Capsules | Suitable for hard capsule products when blend uniformity and flowability are validated. Because inclusion levels may be low, geometric dilution or carrier-based premixing is recommended before final blending. Prototype use should be calculated from target label claim, assay value, overage policy, and capsule fill weight. |
| Tablets | Suitable for multivitamin and B-complex tablet systems after compression testing. Formulators should check flow, hardness, friability, disintegration, lubricant compatibility, and content uniformity. Granulation may be considered when the complete formula has poor flow or segregation risk. |
| Powder blends | Commonly used in vitamin premixes and nutrition powder blends. Particle size should be aligned with the carrier system to reduce segregation during mixing, transfer, and packing. Bulk density data can support dosing equipment setup. |
| Stick packs and sachets | Suitable for dry single-serve systems when moisture-barrier packaging is selected. Sensory impact is usually low, but formula-level flavor testing is recommended when combined with acids, minerals, sweeteners, or botanical extracts. |
| Beverage powders | Water solubility supports instant beverage powder development. Pre-dissolution, solution clarity, pH compatibility, and mineral interaction should be checked for transparent or lightly flavored systems. |
| Private label supplement projects | Suitable for B-complex, multivitamin, beauty-from-within, sports nutrition, fortified powder, and functional blend projects where regulatory-neutral vitamin positioning and complete documentation are required. |
| Format | Testing Focus |
|---|---|
| RTD drinks | Test dissolution, clarity, pH compatibility, heat exposure, sedimentation, flavor interaction, and potency retention under the actual process. Overage should be based on stability data and target shelf-life requirements. |
| Gummies | Evaluate heat exposure, water activity, pH, sugar-acid matrix compatibility, finished-product uniformity, and potency retention. Late-stage addition may reduce unnecessary heat and moisture exposure. |
| Functional bars | Check moisture migration, blend uniformity, sensory effect, particle visibility, and shelf-life stability. Premixing with a dry carrier can reduce localized concentration differences. |
| Mineral-vitamin blends | Evaluate compatibility with calcium, magnesium, iron, zinc, electrolytes, acidulants, and flavors. Localized pH or ionic strength may affect wetting behavior in beverage systems. |
| High-humidity production sites | Confirm open-time limits, caking tendency, flowability, line-side handling method, and resealing procedure before scale-up. Controlled RH storage is recommended. |
For low-dose vitamin systems, Vitamin B5 Calcium Pantothenate Powder should usually be introduced through geometric dilution or a controlled premix rather than added neat into a large blend. This reduces hot-spot risk and supports finished-product uniformity. Prototype inclusion should be calculated from assay, serving size, target declaration, formula overage policy, processing loss, and destination market requirements.
In capsules and tablets, the main technical concerns are blend uniformity, segregation, dust generation, flowability, compression behavior, and compatibility with minerals or high-load excipients. In beverage powders and RTD drinks, the key risks are incomplete wetting, localized acidity, cloudiness, sediment, and flavor interaction. Pre-dissolving calcium pantothenate before adding acids, minerals, flavors, or sweeteners can improve process control.
In gummies and bars, formulators should evaluate heat exposure, moisture migration, water activity, pH, and potency retention across shelf life. For private label and contract manufacturing projects, recommended pilot checks include assay, identity, loss on drying, particle size, microbiology, heavy metals, solution behavior, and finished-product content uniformity.
| Item | Standard B2B Options |
|---|---|
| Sample packing | Sealed sample packs for laboratory evaluation, supplier approval, prototype trials, and documentation review |
| Bulk inner packing | Food-grade PE liner, aluminum foil bag, or moisture-barrier liner according to order requirements |
| Bulk outer packing | Carton or fiber drum; 25 kg bulk pack commonly available depending on order plan and logistics route |
| Label information | Product name, batch number, net weight, manufacture date, expiry or retest date, storage conditions, and handling marks |
| Palletization | Export palletization available with stretch wrap, corner protection, pallet label, and shipping marks when required |
| Shelf life | Typically 24–36 months unopened under recommended storage; confirmed by specification and packaging format |
| Storage conditions | Store sealed in a cool, dry, well-ventilated area away from humidity, direct sunlight, heat sources, and strong odors |
| Humidity control | Keep containers tightly closed after opening; minimize line-side exposure and reseal unused material promptly |
| Temperature control | Avoid prolonged high-temperature storage and repeated container temperature cycling during long-distance transit |
| Shipping options | Courier, air freight, sea freight, or multimodal shipment according to quantity, urgency, destination, and document requirements |
| Export documents | Commercial invoice, packing list, COA, SDS, origin statement, and other shipment documents according to project needs |
| Long-distance shipping | Moisture-barrier packaging and container protection are recommended for humid routes or extended sea freight schedules |
| Handling after opening | Record first-open date, inspect liner integrity, prevent cross-contamination, and follow the buyer’s internal use window |
| Item | Typical Supply Information |
|---|---|
| Standard MOQ | Usually from one standard bulk pack; pilot quantities may be discussed for qualification and formulation evaluation |
| Sample policy | Trial samples may be supplied for supplier approval, laboratory testing, prototype development, and document review |
| Standard lead time | Confirmed after specification, quantity, packaging, testing scope, and document requirements are reviewed |
| Custom specification lead time | Longer lead time may apply for custom particle size, tighter limits, expanded testing, or special packaging |
| Bulk supply support | Batch-based bulk supply for supplement brands, importers, distributors, private label companies, and contract manufacturers |
| Custom manufacturing support | Assay alignment, particle size adjustment, carrier-based premix development, blend support, and project-specific specification control |
| OEM / private label support | Ingredient supply, formula discussion, documentation preparation, packaging coordination, and production support where applicable |
| Custom COA scope | Standard or expanded COA items can be discussed according to buyer QA requirements and destination market expectations |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related documents |
| Testing support | Assay, identity, loss on drying, particle size, residue on ignition, microbiology, heavy metals, calcium content, related substances, and solution clarity when required |
| Buyer information needed | Target specification, application format, order quantity, destination market, document checklist, packaging needs, and testing requirements |
For a B2B inquiry, please provide the target specification, application format, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline. This helps Essencefield match Vitamin B5 Calcium Pantothenate Powder with the appropriate COA scope, particle size, packaging format, supplier approval documents, logistics plan, and bulk supply schedule.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.