

Vitamin K Powder is a microencapsulated MK-7 vitamin ingredient for dry supplement and premix production. Based on fermentation-derived menaquinone-7 and an all-trans assay target, it is supplied as an off-white to pale yellow powder for capsules, tablets, gummies and dry premixes. Its fat-soluble profile requires controlled dispersion, light protection, carrier review and specification-focused blending before commercial production and export packaging.
| Item | Specification |
|---|---|
| Product name | Vitamin K2 MK-7 Powder |
| Common reference names | Vitamin K Powder, Vitamin K2 Powder, MK-7 Powder, Menaquinone-7 Powder, all-trans MK-7 |
| Ingredient category | Vitamin ingredient, fat-soluble active premix, microencapsulated nutritional ingredient |
| Active component | Menaquinone-7, typically controlled as all-trans MK-7 |
| Source or raw material origin | Typically fermentation-derived MK-7; source route confirmed by lot and purchase agreement |
| Standard specification | Common supply options include 2,000 ppm / 0.20% MK-7; final assay range confirmed by agreed specification |
| Custom specification options | Assay adjustment, carrier selection, particle size control, water activity control, and premix dilution options |
| Assay method | HPLC assay, usually reported as all-trans MK-7 according to the agreed test method |
| Grade | Food / supplement grade; other project requirements reviewed before quotation |
| Processing method | Fermentation, purification, stabilization, microencapsulation, drying, sieving, blending, and batch release review |
| Appearance | Off-white to pale yellow powder; color may vary slightly with carrier and active concentration |
| Odor and taste | Mild characteristic odor; low flavor contribution at typical micro-dose use levels |
| Carrier system | Maltodextrin, gum acacia, starch-based carrier, or customer-agreed carrier system |
| Solubility / dispersibility | Not truly water-soluble; designed for dry blending or controlled dispersion in compatible systems |
| Particle size | Commonly 80 mesh or customized particle size; D10 / D50 / D90 reporting available when required |
| Loss on drying / moisture | Controlled according to agreed specification to support flowability and caking resistance |
| Water activity | Available when required for humidity-sensitive, gummy, sachet, or long-distance shipping projects |
| Residue on ignition / ash | Tested according to agreed specification when included in the COA scope |
| Bulk density | Reported by lot when required for capsule filling, tablet blending, premix design, or automated dosing |
| Flowability | Reviewed for micro-dose premixes, capsule blends, sachets, and mineral-containing formulations |
| pH behavior | Can be evaluated as a slurry when required; not positioned as a clear aqueous solution ingredient |
| Stability profile | Sensitive to light, oxygen, heat, and humidity; protective packaging and controlled processing are recommended |
| Main formulation risk | Micro-dose segregation, color shift, assay loss, caking, surface oil, and non-uniform distribution |
| Application compatibility | Capsules, tablets, powder blends, stick packs, sachets, gummies, chewables, and selected beverage powder systems |
| Shelf life | Typically 24 months unopened under recommended storage conditions; confirmed by lot and packaging format |
| Origin | Confirmed by lot, order agreement, and country of origin statement when required |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, country of origin statement, and project-related documents |
Vitamin K Powder may refer to Vitamin K1, Vitamin K2 MK-4, Vitamin K2 MK-7, or customized premixes. This page focuses on Vitamin K2 MK-7 Powder, a microencapsulated menaquinone-7 ingredient used in B2B supplement manufacturing where low-dose uniformity, assay control, carrier declaration, and stability review are critical.
Typical COA items should be confirmed according to the agreed specification, test method, destination market requirements, and buyer quality checklist. Not every optional test is included on every standard COA.
| Physical / Chemical Item | Typical Control or Reporting |
|---|---|
| Appearance | Off-white to pale yellow powder |
| Odor | Characteristic, without abnormal odor |
| Identification | Conforms by HPLC retention time or agreed identity method |
| Assay | Commonly 2,000 ppm / 0.20% MK-7, or customized assay according to project |
| Active definition | Usually reported as all-trans MK-7 when required by the specification |
| Isomer profile | Cis / trans profile available when required for supplier approval or finished-product QC |
| Loss on drying | Typically controlled to support powder stability; limit confirmed by agreed specification |
| Water activity | Available for caking-sensitive, gummy, sachet, or long-term storage projects |
| Residue on ignition / ash | Tested according to agreed specification |
| Particle size | 80 mesh or customized particle size; PSD reporting available when required |
| Bulk density | Reported by lot when needed for filling, blending, or premix dilution planning |
| Surface oil / encapsulation integrity | Available when required for tablet compression or oxidation-sensitive formulas |
| Oxidation indicator | Peroxide value or project-specific oxidation proxy available when required |
| Residual solvents | Tested according to agreed specification when applicable to process route |
| Carrier confirmation | Declared according to agreed formulation and document requirements |
| Heavy Metals | Typical Limit |
|---|---|
| Lead (Pb) | ≤1.0 mg/kg, or customer-specific limit |
| Arsenic (As) | ≤1.0 mg/kg, or customer-specific limit |
| Cadmium (Cd) | ≤1.0 mg/kg, or customer-specific limit |
| Mercury (Hg) | ≤0.1 mg/kg, or customer-specific limit |
| Microbiology | Typical Limit |
|---|---|
| Total Plate Count | ≤10,000 CFU/g, or customer-specific limit |
| Yeast & Mold | ≤100 CFU/g, or customer-specific limit |
| E. coli | Negative / 10 g |
| Salmonella | Negative / 25 g |
| Staphylococcus aureus | Tested when required |
| Coliforms | Tested when required |
| Product-Specific Quality Indicator | B2B Review Focus |
|---|---|
| All-trans MK-7 assay | Supports potency calculation, incoming QC, and finished-form label claim planning |
| Cis / trans isomer profile | Helps avoid method disputes between “total K2” and all-trans MK-7 reporting |
| Carrier system | Affects allergen review, vegan statement preparation, tablet binding, gummy dispersion, and powder mouthfeel |
| Particle size distribution | Supports blend uniformity, segregation control, capsule filling, sachet packing, and compression trials |
| Water activity | Helps manage caking risk during storage, ocean freight, humid production environments, and long warehouse cycles |
| Surface oil | Important for tablet sticking, oxidation control, odor control, and visual consistency |
| Encapsulation integrity | Helps protect MK-7 during blending, sieving, repacking, and finished-form processing |
| Color comparison | Used for batch-to-batch appearance review in pale powder blends, chewables, and gummy prototypes |
Each batch of Vitamin K2 MK-7 Powder may be reviewed through identity confirmation, source record verification, production batch record review, and comparison against the approved specification before release. HPLC assay is checked against the target MK-7 potency, while isomer profile, oxidation indicator, moisture, water activity, particle size, bulk density, and encapsulation behavior can be reviewed when included in the project scope. Microbiology and heavy metals are tested according to the agreed release plan, with residual solvents, carrier confirmation, surface oil, and customer-specific limits available when required. QA review also includes odor, color, COA consistency, retained sample filing, and batch-to-batch comparison against approved reference material. For micro-dose formulations, composite sampling and blend-uniformity planning are recommended because a single grab sample may not represent the full lot. Release documents can be aligned with supplier approval files, distributor technical dossiers, import records, and contract manufacturing batch documentation.
Vitamin K2 MK-7 Powder is supplied for B2B projects where ppm-level active control, stable dry handling, and documentation consistency are more important than broad marketing claims. The microencapsulated premix format helps convert a fat-soluble, light-sensitive active into a powder ingredient suitable for controlled weighing, staged dilution, and commercial supplement production.
From a quality management perspective, Vitamin K2 MK-7 Powder should be evaluated as both an active vitamin source and a process-sensitive premix. MK-7 is normally used at low inclusion levels, so buyer approval should not rely only on assay percentage. QA teams commonly review identity, active definition, isomer profile, water activity, particle size distribution, surface oil, carrier system, packaging protection, and batch-to-batch appearance. A lot with acceptable assay may still cause production issues if it segregates in a mineral premix, cakes during humid transport, or shows poor flow in capsule filling. For this reason, the most useful specification connects chemical testing with manufacturing performance. Buyers can request lot comparison data, retained sample review, method information, and custom COA items before confirming bulk purchase.
Vitamin K2 MK-7 Powder supports solid dosage forms, dry premixes, powder supplements, and selected gummy or chewable systems where controlled dispersion is more realistic than full solubility. Application-specific testing is recommended because MK-7 is fat-soluble, sensitive to light and oxygen, and typically added at microgram-level finished-form targets.
| Format | Formulation Guidance |
|---|---|
| Capsules | Suitable for hard capsules when diluted with compatible excipients such as MCC, maltodextrin, inulin, or a validated premix base. Review flowability, bulk density, fill weight, and content uniformity before scale-up. |
| Tablets | Suitable for direct compression or granulation trials when surface oil, particle size, and blend sequence are controlled. Check sticking, friability, hardness, disintegration, and assay recovery after compression. |
| Powder blends | Use staged dilution before adding the active to the main blend. A 1:10 to 1:50 preblend can improve weighing accuracy and reduce micro-dose hot spots. |
| Stick packs and sachets | Best used in a diluted premix with validated distribution. Confirm flowability, color visibility, caking risk, and finished sachet uniformity. |
| Multivitamin premixes | Compatible with vitamin-mineral systems when density matching and blend order are controlled. Add dense minerals after MK-7 dilution whenever possible. |
| Private label supplement projects | Custom assay, carrier, particle size, and document packages can be aligned with capsules, tablets, gummies, sachets, or powder product development. |
| Format | Testing Focus |
|---|---|
| Gummies | Evaluate slurry addition, heating profile, shear exposure, assay recovery, color stability, and final distribution after depositing. |
| Beverage powders | Suitable only when dispersion is acceptable. Test wet-out behavior, sedimentation, serving-dose uniformity, color visibility, and compatibility with flavors or acids. |
| RTD drinks | Requires extra development because MK-7 is not truly water-soluble. Oil-dispersible, emulsion, or alternative delivery systems may be needed. |
| Functional bars | Review fat-phase compatibility, mixing order, thermal exposure, water activity, and assay recovery after forming. |
| Chewables | Test compression, mouthfeel, flavor masking, color impact, surface oil, and uniformity across tablet weight range. |
| Softgels | Powder premix may not be the preferred input. Oil-based MK-7 forms should be reviewed separately for softgel fill systems. |
Vitamin K2 MK-7 Powder should be packaged and handled as a light-, oxygen-, heat-, and humidity-sensitive vitamin premix. Packaging selection should support assay stability, color consistency, flowability, and reduced caking risk during bulk storage, export shipping, repacking, and production staging.
| Packaging Item | Typical B2B Option |
|---|---|
| Sample packing | Sealed foil bag or small sample pack with batch number, net weight, and storage instruction |
| Bulk inner packing | Food-grade PE bag or foil-laminate liner; desiccant or oxygen-control options available when required |
| Bulk outer packing | Fiber drum or export carton according to order size, destination, and handling requirements |
| Common pack sizes | 1 kg, 5 kg, 10 kg, or 25 kg formats; final packing confirmed by order and stability needs |
| Label information | Product name, batch number, net weight, production date, expiry or retest date, storage conditions, and handling marks |
| Palletization | Export palletization available; carton or drum protection selected according to shipping route |
| Shelf life | Typically 24 months unopened under recommended conditions; confirmed by lot and packaging format |
| Storage conditions | Store sealed in a cool, dry, light-protected area; avoid heat, humidity, and repeated air exposure |
| Humidity control | Desiccant and low-water-activity control recommended for humid routes or long warehouse cycles |
| Temperature control | Avoid prolonged high-temperature exposure; controlled storage can be reviewed for sensitive projects |
| Shipping options | Air, sea, courier, or forwarder-based shipment depending on quantity, destination, and document requirements |
| Export documents | Commercial invoice, packing list, COA, SDS, and project-related documents available when required |
| Long-distance shipping | Foil liner, desiccant, oxygen control, opaque outer packaging, and reduced repacking are recommended |
| Handling after opening | Reseal quickly, minimize headspace, avoid strong light, and use smaller inner packs for repeated production runs |
| Item | B2B Supply Information |
|---|---|
| Standard MOQ | Commonly starts from 1 kg for evaluation or pilot use; commercial MOQ confirmed by specification and packing format |
| Sample policy | Samples available for formulation trials, incoming QC review, supplier qualification, and customer approval |
| Standard lead time | Typically 7–15 working days for standard specification, subject to stock status, testing scope, and export arrangement |
| Custom specification lead time | Custom assay, carrier, particle size, packaging, or added testing may require extra production and QC time |
| Bulk supply support | Available for recurring orders, distributor supply, contract manufacturing, and private label supplement projects |
| Custom manufacturing support | Assay adjustment, carrier customization, particle size control, premix development, and project-specific testing |
| OEM / private label support | Ingredient supply, premix planning, formulation support, and document alignment for finished supplement projects |
| Document request support | Buyers may request COA, TDS, SDS, sample specification, custom MK-7 assay options, and project-specific quality statements |
| Available documents | COA, TDS, SDS, specification sheet, allergen statement, GMO statement, gluten statement, vegan statement, irradiation statement, and country of origin statement |
| Testing support | HPLC assay, isomer profile, heavy metals, microbiology, particle size, moisture, water activity, oxidation indicator, and project-specific tests |
| Buyer information needed | Target potency, application format, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline |
For a B2B quotation, please provide the target specification, application format, order quantity, destination market, document checklist, testing requirements, packaging needs, and expected timeline. This allows our technical sales, QA, and formulation teams to confirm the suitable Vitamin K2 MK-7 Powder grade, COA scope, sample plan, lead time, packaging format, and bulk supply arrangement for your project.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.