

Zinc Gluconate Powder is a white to off-white zinc salt of gluconic acid sourced through qualified manufacturing partners in China for supplements, fortified foods and mineral premixes. Available specifications can cover zinc gluconate assay, elemental zinc, moisture, particle size, bulk density, heavy metals and microbiology. Essencefield supports specification alignment, representative samples, batch COA review, traceability documents and international bulk supply for supplement brands, contract manufacturers, importers and distributors.
| Item | Typical B2B Specification |
|---|---|
| Product Name | Zinc Gluconate Powder |
| Chemical Name | Zinc gluconate / gluconic acid zinc salt |
| CAS Number | 4468-02-4 |
| Molecular Formula | C₁₂H₂₂O₁₄Zn, anhydrous reference |
| Molecular Weight | 455.68 g/mol, anhydrous reference |
| Appearance | White to off-white crystalline or fine powder |
| Hydration & Reporting Basis | Defined as as-is, dried or anhydrous in the product specification |
| Assay | Zinc gluconate assay controlled by the approved specification |
| Elemental Zinc | Approximately 14% theoretical for the anhydrous form; use batch data for formulation |
| Grade | Food, supplement or project-defined grade |
| Particle Size | Standard fine powder; mesh or PSD can be aligned by project |
| Solubility | Soluble in water; finished-matrix clarity and sediment require testing |
| pH | Reported at a defined solution concentration |
| Moisture | Controlled to support powder flow and reduce caking |
| Bulk Density | Available for blending, filling or premix calculations |
| Available Pack Sizes | Commonly 10 kg, 20 kg or 25 kg per carton or drum |
| Shelf Life | Typically 24–36 months in unopened packaging |
| Available Documents | COA, TDS, SDS, specification sheet and applicable declarations |
Zinc gluconate assay and elemental zinc are separate specification fields. The salt assay supports identity and purity review, while the elemental zinc result is used to calculate the required ingredient quantity and reconcile the finished-product claim. Hydration and moisture can change the zinc percentage of the commercial powder, so the reporting basis should remain consistent across the specification, COA and formula calculation. Particle size, moisture and bulk density can also affect premix uniformity, capsule fill volume, tablet feeding and sachet accuracy. When these properties are critical to production, the proposed commercial batch should be compared with the approved sample before recurring orders are released.
Final numerical limits follow the selected manufacturing source, approved specification and batch COA.
Physical and Chemical Controls
| Parameter | Typical Control |
| Appearance | White to off-white crystalline or fine powder |
| Identification | Positive for zinc and gluconate |
| Zinc Gluconate Assay | Tested against the approved specification |
| Elemental Zinc | Reported or calculated using the stated basis |
| Water / Loss on Drying | Controlled to the approved moisture limit |
| pH | Tested at a defined solution concentration |
| Chloride | Controlled within the approved impurity profile |
| Sulfate | Controlled within the approved impurity profile |
| Reducing Substances | Included where required by the selected grade |
| Particle Size | Standard mesh or agreed PSD |
Heavy-Metal Controls
| Parameter | Typical Limit |
| Lead | Per approved specification |
| Arsenic | Per approved specification |
| Cadmium | Per approved specification |
| Mercury | Per approved specification |
Microbiological Controls
| Parameter | Typical Control |
| Total Plate Count | Tested to the approved food or supplement limit |
| Yeast and Mold | Included where required |
| E. coli | Negative or within the stated method limit |
| Salmonella | Negative or within the stated method limit |
Identity, assay, elemental zinc and reporting basis are the primary release controls because several zinc salts have a similar white powder appearance. An anhydrous theoretical zinc value should not automatically be applied to a commercial grade containing moisture or water of hydration. The COA should identify the test method, acceptance criterion, actual result and basis used for the reported lot.
Physical data should be reviewed alongside analytical results when Zinc Gluconate Powder is used at a low inclusion level. A batch can meet its chemical assay but behave differently during blending, transfer or filling if its particle-size distribution, moisture or density changes. Chloride, sulfate and reducing substances provide zinc-gluconate-specific purity information, while heavy-metal and microbiological limits should reflect the dosage format and intended market. Additional supplier qualification, incoming inspection and traceability controls are outlined in Essencefield’s Raw Material Quality process.
Compare Zinc Glycinate Powder for chelated-mineral positioning or Zinc Oxide Powder when a higher theoretical zinc concentration is required. Final selection should consider solubility, taste and processing behavior.
| Application | Formulation Focus |
| Capsules | Elemental zinc calculation, premixing, density and fill-weight control |
| Tablets | Flow, compressibility, hardness, friability and disintegration |
| Powder Blends & Sachets | Low-dose uniformity, carrier selection and feeder consistency |
| Gummies | pH, processing temperature, mineral distribution and flavor masking |
| Chewables | Metallic or astringent notes, mouthfeel and flavor balance |
| Beverage Powders | Dissolution, haze, sediment, re-dispersion and pH compatibility |
| Mineral Premixes | Compatibility with calcium, magnesium, iron, phosphate and carbonate salts |
Calculate the required ingredient quantity from the target elemental zinc divided by the elemental zinc fraction reported for the approved batch. A theoretical anhydrous percentage should not replace the commercial result when the hydration or moisture basis differs.
Raw-material water solubility does not guarantee compatibility in the finished formula. Proteins, polyphenols, phosphates, flavors, sweeteners and other minerals can change clarity, sediment, taste and assay recovery. Development should therefore use the complete formulation under its intended processing and storage conditions.
Pilot production should assess blend uniformity, capsule variation, tablet performance, gummy distribution or beverage sediment according to the dosage format. Recording the ingredient lot, addition order, mixer type, process temperature and hold period helps distinguish raw-material variation from changes caused by the formula or manufacturing process.
| Item | Typical Supply Approach |
| Sample Pack | Sealed foil bag for laboratory and formulation evaluation |
| Bulk Packaging | Food-grade inner liner in an export carton or fiber drum |
| Available Pack Sizes | Commonly 10 kg, 20 kg or 25 kg |
| Label Information | Product name, lot number, net weight, date and storage conditions |
| Shelf Life & Storage | Typically 24–36 months unopened; store sealed, cool and dry |
| Shipping Documents | Commercial invoice, packing list, COA, SDS and agreed compliance files |
Keep the powder sealed and protected from moisture during storage and handling. Reseal opened liners promptly to reduce caking and changes in flow behavior. Confirm the final liner, outer package, net weight, shipping marks, label format and destination documents before dispatch.
| Item | B2B Supply Information |
| MOQ | Typically starts from 25 kg |
| Sample Availability | Available for formulation, sensory and supplier-approval review |
| Lead Time | Commonly 7–15 working days after order confirmation, subject to inventory |
| Custom Specification | Assay basis, elemental zinc, PSD, moisture, heavy metals, microbiology and packaging |
| Documents & Testing | COA, TDS, SDS, specification sheet and project-specific testing |
| Quotation Information | Specification, quantity, application, destination, packaging and document needs |
For a quotation or sample request, provide the target specification, elemental zinc basis, application, quantity, destination, packaging and required documents. Gummy, beverage and multi-mineral projects should also include relevant pH, processing and compatibility requirements. Available quality documents and certification scope can be reviewed through Testing & Certifications.
Share your target specification, application, quantity and document needs. We will help confirm suitable options, COA/TDS/SDS support and bulk supply details.
Explore related ingredients for formula comparison, complementary applications and alternative sourcing options across food, beverage, supplement and wellness projects.