Sodium isoascorbate powder is a water-soluble reducing antioxidant used in oxidation-sensitive food-processing systems. It is also known as sodium erythorbate, sodium D-isoascorbate, E316, or INS 316.
For quality assurance and procurement teams, selecting the material requires more than checking a nominal purity value. Buyers should confirm its chemical identity, hydration form, assay basis, specific rotation, physical performance, batch documentation, regulatory suitability, and long-term supply consistency.
This guide explains how to evaluate an E316 specification, interpret a batch certificate of analysis, qualify the material in aqueous and dry-blend applications, and compare potential suppliers.
E316 Procurement Summary
| Review area | What to confirm |
|---|---|
| Identity | Sodium isoascorbate or sodium erythorbate, E316/INS 316, CAS 6381-77-7 |
| Assay basis | As received, after drying, monohydrate, or anhydrous equivalent |
| Chemical controls | Assay, specific rotation, pH, loss on drying, and relevant impurities |
| Physical performance | Particle size, dissolution, solution clarity, and blend behavior |
| Batch evidence | Lot-specific COA with traceable numerical results |
| Supplier approval | Specification control, application testing, change control, and repeat supply |
The official JECFA sodium erythorbate specification identifies sodium isoascorbate as a synonym, lists CAS 6381-77-7, and describes the commercial monohydrate with a formula weight of 216.13. Its reference assay is not less than 98% after drying.
Confirm E316 Identity and Assay Basis
A complete procurement description should state:
Sodium Isoascorbate Powder / Sodium Erythorbate, E316 or INS 316, CAS 6381-77-7
Using the full identity reduces the risk of receiving a related but different ingredient.
Sodium isoascorbate should not be confused with:
- Erythorbic acid, E315
- Sodium ascorbate, E301
- Ascorbic acid, E300
The FDA food-substance inventory lists sodium isoascorbate as another name for sodium erythorbate and identifies it separately from sodium ascorbate.
The ingredient name, CAS number, and additive number should remain consistent across all technical, commercial, and shipment documents.
Why molecular weight may be 198.11 or 216.13
Supplier documents commonly show one of two values:
| Material basis | Formula | Approximate molecular weight |
|---|---|---|
| Anhydrous sodium erythorbate | C₆H₇NaO₆ | 198.11 |
| Sodium erythorbate monohydrate | C₆H₇NaO₆·H₂O | 216.13 |
The difference results from one molecule of crystallization water. It does not automatically indicate an incorrect product, but the supplied form and analytical basis must be defined before quotations or COAs can be compared.
Confirm whether assay is reported as received, after drying, or as an anhydrous equivalent. This distinction matters when a formulation or regulation expresses the required quantity on an anhydrous basis.
For example, 9 CFR 424.22 requires hydrated sodium erythorbate used in specified bacon processes to be adjusted to deliver the equivalent required quantity.
Critical E316 Specification Parameters
An effective sodium isoascorbate specification should control identity, potency, purity, and process behavior.
| Parameter | Common reference | Procurement significance |
|---|---|---|
| Assay | ≥98.0% after drying | Establishes active-content basis |
| Specific rotation | Approximately +95.5° to +98.0° | Supports stereochemical identity |
| pH | 5.5–8.0 in a 10% solution | Helps assess solution consistency |
| Loss on drying | Typically ≤0.25% | Supports moisture and assay control |
| Oxalate | Passes the specified test | Relevant to purity and aqueous use |
| Lead | ≤2 mg/kg under JECFA | Controls a toxic-element risk |
| Particle size | Agreed mesh or distribution | Affects dissolution and blend uniformity |
| Solution clarity | Project-specific | Important for brines and clear liquid systems |
JECFA provides an internationally recognized identity and purity baseline. A commercial purchasing specification may add particle size, solution clarity, microbiology, bulk density, or customer-specific contaminant limits.
Current product parameters, typical mesh options, sample availability, and project-specific documentation can be reviewed on the Essencefield sodium isoascorbate powder page.
Specific rotation
Specific rotation is a stereochemical identity test that helps confirm the intended sodium erythorbate form.
Appearance and assay alone may not adequately distinguish the correct material from a related compound or incorrectly identified ingredient. The rotation result should be evaluated against the approved range and analytical method.
pH method
A pH result is meaningful only when the solution concentration and preparation method are defined.
The JECFA reference uses a 10% aqueous solution. A result from another concentration should not be compared directly with that range without reviewing the method.
Product Specification vs. Batch COA
A product specification defines what the material must meet. A batch COA reports what a particular production lot actually tested.
| Document | Main purpose | Limitation |
|---|---|---|
| Product specification | Defines approved acceptance limits | Does not prove a specific batch was tested |
| Representative COA | Shows a typical test panel and format | Does not represent the delivered batch |
| Batch COA | Reports results for a defined production lot | Must be compared with the approved specification |
| TDS | Describes technical and physical properties | Does not replace batch testing |
| SDS | Provides safety and handling information | Does not prove food-category authorization |
Independent testing may supplement supplier data when a project requires additional verification.
Essencefield’s raw-material quality process connects supplier qualification, specification approval, COA review, incoming inspection, material release, and batch traceability. This is more reliable than treating a COA as a standalone approval document.
Six COA Checks Before Batch Approval
1. Verify the complete identity
Confirm that the COA states sodium isoascorbate or sodium erythorbate and includes CAS 6381-77-7.
E316 or INS 316 should also appear where required by the buyer’s document system. A certificate showing erythorbic acid or another CAS number requires clarification.
2. Confirm assay and hydration basis
The COA should identify whether assay is measured after drying, as received, or on another defined basis.
A result such as “99.0%” is incomplete when the hydration form and calculation method are missing.
3. Review specific rotation
Check the reported result, approved range, solution conditions, test temperature, and analytical method.
A missing specific-rotation result may be acceptable only when another approved stereochemical identity method is used.
4. Check the pH method
The certificate should identify the solution concentration used for pH testing.
The result and method should correspond with the approved purchasing specification.
5. Require numerical results
Where quantitative testing is performed, the COA should normally show actual values rather than only “conforms.”
Numerical results allow QA teams to evaluate:
- Distance from the acceptance limit
- Batch-to-batch consistency
- Moisture or pH movement
- Assay margin
- Changes in physical performance
6. Confirm traceability and document consistency
The COA batch number should match the label, packing list, invoice, and shipment records.
Review the specification, COA, TDS, SDS, product label, and origin statements together. Warning signs include:
- Conflicting product names or CAS numbers
- Formula and molecular-weight mismatches
- Missing assay basis
- Generic certificates without a lot number
- Identical results reused across multiple batches
- Uncommunicated changes in source or specification
Compare Multiple Commercial Batches
A single compliant COA provides only one snapshot. Long-term supplier approval should also evaluate consistency across several commercial lots.
| Repeated trend | Possible concern |
|---|---|
| Assay approaching the minimum | Reduced process or dosing margin |
| Increasing loss on drying | Moisture, packaging, or storage variability |
| Shifting pH | Process or analytical inconsistency |
| Variable specific rotation | Identity, source, or method concern |
| Changing particle size | Dissolution or blending variability |
| Frequent “conforms” entries | Limited visibility into actual performance |
Trend analysis does not replace batch specifications. It helps identify gradual changes before they affect production or release decisions.
Application Qualification
Analytical compliance does not automatically guarantee successful performance in the buyer’s production process.
Aqueous systems and injection brines
Evaluate:
- Dissolution time
- Solution clarity
- Final pH
- Insoluble material
- Holding stability
Controlled pre-dissolution can reduce clumping and local concentration differences. For clarity-sensitive systems, oxalate, insoluble matter, solution appearance, and reducing activity may be added to the approved specification.
Dry cure and seasoning blends
Evaluate:
- Particle-size compatibility
- Bulk-density differences
- Segregation
- Blend uniformity
- Caking during storage
Samples should be collected from multiple mixer or packing locations. Visual uniformity alone does not confirm even distribution when E316 is used at a low inclusion level.
Regulatory Verification
Identity standards and food-use authorization are separate questions.
| Authority | What it confirms | What the buyer must still verify |
|---|---|---|
| JECFA | Chemical identity and purity reference | Application authorization |
| Codex GSFA | INS 316 provisions by food category | Local adoption and applicable limits |
| European Union | E316 identity and purity requirements | Category-specific conditions |
| United States | Ingredient identity and selected meat provisions | Product, formulation, and labeling requirements |
The Codex GSFA sodium erythorbate entry organizes INS 316 provisions by food category and conditions of use.
The European Union’s food-additive specification regulation identifies E316 as sodium erythorbate and recognizes sodium isoascorbate as a synonym.
Before approval, verify the food category, permitted level, calculation basis, labeling requirements, and destination-market rules. Identity specifications do not automatically authorize use in every food.
Supplier Qualification Scorecard
| Evaluation area | Approval question |
|---|---|
| Identity and specification | Are the chemical form, CAS number, assay basis, pH method, and physical controls defined? |
| Batch documentation | Does each lot have traceable numerical COA results? |
| Application testing | Has the sample been evaluated in the intended process? |
| Source and change control | Will changes in source, process, method, or specification be communicated? |
| Supply continuity | Can repeat orders maintain consistent quality and documents? |
| Commercial terms | Are MOQ, lead time, packing, testing scope, and shipment terms clear? |
The lowest price per kilogram does not necessarily create the lowest procurement cost. Incomplete documents, unsuitable particle size, delayed release, or inconsistent batches may create greater cost than a small difference in unit price.
Essencefield Sample and Documentation Support
Essencefield supports sodium isoascorbate projects through specification confirmation, sample qualification, representative and batch-document review, testing coordination, bulk packing, and export communication.
The current product page lists laboratory samples, a standard bulk MOQ typically beginning from 25 kg, and support for COA, TDS, SDS, and project-specific specifications. Final limits, testing scope, certifications, packaging, and lead time are confirmed for the selected source and target market.
Additional verification may be coordinated through Essencefield’s testing and certification support. International packing, freight handover, export documents, and repeat-order planning can be reviewed through its global supply support.
RFQ Template
Product: Sodium Isoascorbate Powder / Sodium Erythorbate
Required specification:
Assay and hydration basis:
Particle size:
Application:
Target market:
Trial and commercial quantity:
Required tests and documents:
Destination:
Expected delivery schedule:
To request a current specification, representative COA, sample, or bulk quotation, submit the application, quantity, destination, and documentation requirements through the Essencefield contact page.
Procurement Conclusion
Approving sodium isoascorbate powder requires a defined specification, a traceable batch COA, suitable process performance, and repeatable supply controls.
The strongest supplier is not necessarily the one offering the highest nominal assay or lowest unit price. It is the supplier that can consistently connect the correct E316 identity with transparent analytical results, application-compatible physical properties, complete documentation, and reliable commercial delivery.

















