Vitamin B3 Niacin Powder: Technical Specs & Buying Guide

Vitamin B3 niacin powder with a technical specification sheet for supplement, premix, tablet, capsule, and beverage formulations.
Table of Contents

Vitamin B3 niacin powder is nicotinic acid, CAS 59-67-6, supplied as a water-soluble vitamin ingredient for supplements, B-complex premixes, fortified foods, tablets, capsules, sachets, beverage powders, gummies, and chewables.

Buyers should evaluate more than the assay value. Chemical identity, related substances, particle size, density, contaminant limits, COA data, formulation performance, packaging, and supply consistency can all affect commercial approval.

Essencefield’s Vitamin B3 Niacin Powder is available with specification review, samples, quality documents, particle-size options, testing coordination, packaging, and bulk supply support. Final acceptance should be based on the agreed specification and lot-specific Certificate of Analysis.

Vitamin B3 Niacin Powder Overview

ParameterTypical supply information
Product nameVitamin B3 (Niacin) Powder
Chemical nameNicotinic acid
CAS number59-67-6
Molecular formulaC6H5NO2
Molecular weight123.11 g/mol
AppearanceWhite to off-white crystalline powder
Typical assay option99.0–101.0% on a dried basis when selected
Identity testingFTIR, HPLC, or another agreed identity method
CarrierNo carrier in the standard pure powder
Particle sizeMesh or particle-size-distribution options available by project
Main formatsCapsules, tablets, premixes, sachets, beverage powders, gummies, and chewables
Typical shelf life24 months under recommended sealed storage
DocumentsCOA, TDS, SDS, specification sheet, and project-specific statements
Commercial supportSamples, custom testing, packaging, MOQ, lead-time, and bulk supply review

PubChem identifies nicotinic acid as niacin, CAS 59-67-6, with the molecular formula C6H5NO2 and a molecular weight of 123.11 g/mol.

Essencefield publishes a typical 99.0–101.0% dried-basis assay option, form-specific identity testing, carrier-free standard powder, customizable physical parameters, and a typical 24-month shelf life. These are supply references rather than universal contractual limits; the final specification must be confirmed for each project.

Buyers developing broader vitamin or mineral systems can also review Essencefield’s nutrition ingredient portfolio.

Niacin and Niacinamide Are Different Ingredients

Niacin and niacinamide are related forms of vitamin B3, but they are chemically distinct and should not be treated as interchangeable names on product specifications, COAs, labels, or purchase orders.

ParameterNiacinNiacinamide
Chemical identityNicotinic acidNicotinamide
CAS number59-67-698-92-0
Molecular formulaC6H5NO2C6H6N2O
Flushing potentialCan cause flushing at supplemental amountsDoes not normally cause the same response
Typical useSupplements, fortified foods, premixes, and selected pharmaceutical formulationsSupplements, foods, beverages, premixes, and cosmetic formulations
Direct substitutionRequires formulation and regulatory reviewRequires formulation and regulatory review

The NIH Office of Dietary Supplements identifies nicotinic acid and nicotinamide as common supplemental forms of niacin. It also notes that nicotinic acid can cause skin flushing, whereas nicotinamide does not normally produce the same effect.

A purchasing brief should therefore define:

  • Nicotinic acid as the required form
  • CAS 59-67-6
  • Target assay and test method
  • Intended dosage format
  • Destination market
  • Required particle size or density
  • Contaminant and microbiological limits
  • Packaging and document requirements

This form-specific identification prevents a supplier from quoting niacinamide when the formulation requires nicotinic acid.

Critical Quality Specifications

A useful vitamin B3 niacin powder specification separates critical chemical controls from application-specific physical properties and risk-based testing.

Specification groupMain parametersPurchasing purpose
Identity and potencyChemical form, identification, assay, related substancesConfirms the correct ingredient and potency
Physical performanceParticle size, bulk density, tapped density, flow, moisture, solubilityPredicts processing and formulation behavior
Risk-based controlsHeavy metals, residual solvents, microbiologySupports customer and destination-market requirements
Commercial controlsPackaging, shelf life, documents, MOQ, lead timeSupports repeatable purchasing and inventory planning

Identity and assay

Identity testing should confirm nicotinic acid and distinguish it from niacinamide. Product names, CAS numbers, labels, COAs, invoices, and purchase orders should remain consistent throughout the supply chain.

Essencefield states that identity can be evaluated by FTIR, HPLC, or another agreed method. Its published typical assay option is 99.0–101.0% on a dried basis when that specification is selected.

Before approval, confirm:

  • Assay range
  • Analytical method
  • Dried-basis or as-is reporting
  • Reference standard
  • Lot-specific numerical result
  • Applicable monograph or customer procedure
  • Rounding and significant-figure rules

A general “99% purity” claim is not a complete purchasing specification. It does not define the acceptance range, moisture correction, impurity profile, analytical method, or batch result.

Related substances, moisture, and residue

Assay measures the quantity of the target ingredient, while related-substance testing evaluates the impurity profile. Both are relevant to batch consistency.

The approved specification may include:

  • Individual related-substance limits
  • Total related substances
  • Loss on drying
  • Residue on ignition
  • Residual solvents, where applicable

Moisture control also affects operational performance. Excess exposure can contribute to caking, hopper bridging, poor feeding, dosage variation, and reduced premix uniformity.

Essencefield’s published framework controls related substances through an agreed HPLC profile and manages moisture and residue according to the selected specification. Exact limits should be confirmed before sample approval.

Particle size and density

Particle-size distribution can be as important as chemical assay in capsules, tablets, sachets, and premixes.

A major particle-size mismatch between niacin and other blend components can increase segregation during:

  • Mixing
  • Transfer
  • Vibration
  • Hopper feeding
  • Compression
  • Capsule or sachet filling

Bulk and tapped density influence feeder calibration, capsule fill weight, packaging volume, and tablet-processing behavior.

Essencefield can review mesh or PSD requirements for different dosage formats and provide density information when required for process evaluation.

Heavy metals and microbiology

Contaminant limits should be matched to the intended application rather than copied from an unrelated specification.

A risk-based test panel may include:

  • Lead
  • Arsenic
  • Cadmium
  • Mercury
  • Total plate count
  • Yeast and mold
  • E. coli
  • Salmonella
  • Other specified organisms

Relevant limits depend on the destination market, daily intake, finished-product category, consumer population, and buyer’s internal standard.

Essencefield’s product framework allows heavy-metal and microbiological requirements to be agreed according to the project. Testing methods and exact limits should be defined before production or third-party analysis.

Formulation and Application Guide

Vitamin B3 niacin powder must perform consistently in the finished manufacturing process. A compliant assay alone does not demonstrate suitability for blending, filling, compression, dissolution, flavor, or stability.

Product formatCritical propertyMain riskRecommended evaluation
CapsulesDensity and flowFill-weight variationFilling and blend-uniformity trial
TabletsParticle size and compressionSegregation or poor compressionPilot tablet run
B-complex premixesHomogeneity and potencyLow-dose distribution failureGeometric dilution and multi-point sampling
SachetsFlow and moistureCaking or dosage variationFilling-line and barrier-packaging test
Beverage powdersSolubility, pH, and tasteSlow dissolution or sensory impactBench dissolution and flavor trial
GummiesHeat, pH, and flavor compatibilityPotency or sensory changePrototype stability study
ChewablesTaste and particle perceptionBitter or acidic carry-throughMasking and compression trial
Mineral blendsPSD and density alignmentSeparation from coarse mineralsSegregation study

Essencefield lists capsules, tablets, powder blends, premixes, sachets, beverage powders, gummies, and chewables among the main application formats for this ingredient.

Low-dose premixing and uniformity

Niacin may represent only a small fraction of a B-complex or multivitamin formula. Directly adding a small quantity to a large bulk blend can create concentrated areas or uneven distribution.

A practical process may include:

  1. Screening the material when required.
  2. Preparing an intermediate premix.
  3. Applying geometric dilution.
  4. Matching particle size with the main carrier.
  5. Defining the ingredient-addition sequence.
  6. Validating blender loading and mixing time.
  7. Sampling from multiple locations.
  8. Confirming finished-product uniformity.

Top, middle, and bottom sampling can help identify segregation before commercial scale-up. The same particle-size specification used in the approved trial should be considered for the commercial batch.

Essencefield’s ingredient sourcing support connects specification matching, document review, samples, testing, dosage-format compatibility, and bulk supply planning.

Beverage and liquid systems

Although nicotinic acid is water-soluble, practical dissolution depends on:

  • Water temperature
  • Ingredient concentration
  • pH
  • Mixing intensity
  • Addition sequence
  • Dissolved minerals
  • Sweeteners and flavors
  • Holding time

Cold-water systems may benefit from pre-dispersion, warm-water dissolution, high-shear mixing, or dilution through a compatible carrier.

Because nicotinic acid is mildly acidic, beverage, gummy, and chewable developers should evaluate its effect on pH, flavor balance, clarity, sedimentation, and stability under the intended process conditions. Essencefield also recommends application testing for cold-water, heat-processed, flavored, and high-mineral systems.

Sensory profile and consumer tolerance

Niacin can contribute a slightly bitter or acidic note in unflavored powders, beverage systems, gummies, and chewables.

Potential solutions include:

  • Taste masking
  • Sweetness and flavor adjustment
  • Use of a diluted premix
  • Lower local ingredient concentration
  • Evaluation of niacinamide when appropriate

Form selection should also consider flushing. The NIH reports that supplemental nicotinic acid at approximately 30–50 mg or more commonly causes redness, warmth, tingling, burning, or itching, although individual responses vary.

Serving level, product positioning, warning language, and the decision to use nicotinic acid rather than niacinamide should be reviewed by qualified formulation and regulatory teams.

Quality Documents and COA Verification

A Certificate of Analysis should report how a specific batch compares with the approved specification.

Core documents

Depending on the project, buyers may request:

  • Controlled specification
  • Lot-specific COA
  • Technical Data Sheet
  • Safety Data Sheet
  • Packaging specification
  • Country-of-origin statement
  • Allergen statement
  • GMO statement
  • Relevant production-site certificates
  • Change-control statement
  • Project-specific test reports

Essencefield states that COA, TDS, SDS, specifications, and selected allergen, GMO, gluten, vegan, irradiation, and origin statements may be available according to the product source and project requirements.

Its raw-material quality process covers supplier qualification, specification approval, COA review, incoming inspection, material release, and batch traceability.

Five-point COA check

CheckWhat to verify
IdentityProduct name, chemical form, CAS number, and grade are consistent
LotCOA number matches the package label and receiving records
ResultsQuantitative tests provide actual values and units
MethodsMethods correspond to the approved specification
LimitsEvery reported result meets the agreed criteria

Under 21 CFR 111.75, U.S. dietary supplement manufacturers must conduct at least one appropriate identity test or examination for each dietary ingredient unless an exemption applies. Reliance on a supplier COA for certain other specifications requires supplier qualification, documented reliability, stated methods and limits, actual results, and periodic reconfirmation.

Independent testing may be appropriate during initial qualification, after a source or process change, following unusual results, or as part of periodic supplier requalification.

Regulatory Considerations

Raw-material suitability does not automatically establish finished-product compliance. The manufacturer or brand owner must confirm that the ingredient form, serving level, declaration, claims, and dosage format meet the requirements of the destination market.

MarketMain purchasing consideration
United StatesDaily Value, Supplement Facts declaration, identity testing, component specifications, and dietary supplement cGMP
European UnionPermitted niacin form, member-state requirements, daily intake, label language, and claims
Other marketsPositive lists, maximum levels, label units, notification procedures, and import documents

United States

The FDA Daily Value for niacin is 16 mg NE for adults and children aged four years and older. NE means niacin equivalents.

The commonly used conversion is:

1 mg NE = 1 mg niacin or 60 mg tryptophan.

Finished-product teams should establish the target label quantity, ingredient input, analytical tolerance, justified overage, release specification, and end-of-shelf-life target.

European Union

The EU Food Supplements Directive lists nicotinic acid and nicotinamide as separate permitted forms of niacin. Buyers should also review member-state requirements, intended daily intake, product notification, label language, maximum levels, and permitted claims.

Use in a food supplement should not be assumed to authorize the same form, amount, or claim in every conventional food, cosmetic, or medicinal product.

Essencefield Supply Support

Essencefield combines raw-material sourcing with specification review, samples, document coordination, testing, packaging, and bulk purchasing support.

Packaging and storage

ItemPublished supply approach
Sample packsAvailable for formulation, sensory, QA, and preliminary testing
Inner packagingFood-grade polyethylene inner bag or double liner
Outer packagingFiber drum, carton, or project-specific export carton
Barrier optionsMoisture- or odor-barrier liners can be discussed
Typical shelf life24 months under recommended sealed storage
StorageCool, dry, ventilated conditions away from humidity, heat, sunlight, and strong odors

The liner should be resealed after opening, and exposure should be minimized in humid production areas. Packaging suitability should be reviewed against the shipping route, storage period, and expected container-opening frequency.

Samples, MOQ, and lead time

Essencefield does not publish one fixed MOQ or lead time for every vitamin B3 niacin powder order.

MOQ and lead time depend on:

  • Selected specification
  • Order quantity
  • Stock or production status
  • Packaging format
  • Testing requirements
  • Documents
  • Destination market
  • Custom processing

Samples and pilot quantities can be discussed for formulation work, supplier qualification, sensory review, and preliminary QC.

Custom specification support

Project-specific requirements may include:

  • Assay range
  • Particle-size distribution
  • Bulk or tapped density
  • Moisture control
  • Heavy-metal limits
  • Microbiological limits
  • Residual-solvent testing
  • Special packaging
  • Carrier-based premixes
  • Additional third-party analysis

Custom requirements should be agreed before sample approval because they may affect pricing, MOQ, and lead time.

Buyers should also verify the exact manufacturing source, applicable certificates, testing laboratory, traceability, and change-control responsibilities for the approved commercial lot.

Seven-Step Procurement Checklist

Before approving vitamin B3 niacin powder:

  1. Confirm nicotinic acid identity and CAS 59-67-6.
  2. Approve assay, analytical method, reporting basis, and impurity limits.
  3. Define application-specific particle size, density, moisture, and flow requirements.
  4. Establish heavy-metal, microbiological, and other risk-based limits.
  5. Review the lot-specific COA and supporting documents.
  6. Complete a formulation or pilot-production trial.
  7. Confirm packaging, MOQ, sample status, shelf life, lead time, delivery terms, and change control.

Request a Specification, Sample, or Quote

For a focused technical and commercial review, provide:

  • Required product form
  • Target assay or standard
  • Intended dosage format
  • Application
  • Destination market
  • Estimated quantity
  • Critical physical or contaminant limits
  • Required documents and delivery timeline

Submit the project through the Vitamin B3 Niacin Powder product page or the Essencefield contact page. The inquiry can then be reviewed against available specifications, samples, testing, packaging, MOQ, and bulk supply options.

Conclusion

Vitamin B3 niacin powder should be approved as a specification-controlled nicotinic acid ingredient. The strongest purchasing decisions combine confirmed identity, assay, impurity controls, application-specific physical properties, COA verification, formulation testing, and reliable commercial supply.

Essencefield supports specification matching, samples, quality documents, custom testing, packaging, and bulk sourcing. Final approval should rely on the agreed specification, lot-specific COA, application trial, destination-market review, and confirmed commercial terms.

Request a Manufacturing Quote

Please use the form below to share your ingredient requirements—product category, target application, desired specifications (e.g., assay/ratio, mesh size, carrier), and estimated order quantity. If you need OEM/private label, include dosage form and key label claims. We’ll route your request to the right team and recommend suitable ingredients, testing/documentation options, packaging, and lead times. You’ll receive indicative pricing, MOQ, and a sample/approval plan.

Picture of Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

We publish technical guides for B2B sourcing and formulation of botanical ingredients, including typical COA/Spec ranges, risk-based testing plans, documentation, and OEM/private-label manufacturing. Content is reviewed to align with manufacturing feasibility, batch traceability, and quality control practices used for global export projects.

Reviewed By: Essencefield QA & Technical Team (Quality System)

Documents (on request): COA · TDS/Spec · SDS · Allergen/GMO statements · Regulatory declarations (market-dependent)

More Posts