Disodium EDTA Powder: Specifications, Grades & Bulk Supply

White disodium EDTA powder with technical specifications, COA review and bulk packaging information for B2B buyers
Table of Contents

Disodium EDTA powder is a water-soluble chelating ingredient used to control trace metal ions in personal care, food-processing, cleaning and technical formulations. By binding iron, copper, calcium, magnesium and other polyvalent ions, it can help reduce oxidation, discoloration, haze, precipitation and hard-water interference.

For B2B procurement, purity alone is not enough to establish product suitability. Buyers should also confirm the chemical form, CAS reference, hydration state, assay basis, chelation value, critical impurities, particle size and supporting quality documents.

Essencefield supplies assay-controlled material for formulation trials and commercial projects. Buyers can review the current Disodium EDTA Powder product information before requesting a representative COA, sample or quotation.

Product Specifications

The final specification should reflect the intended application, destination market and buyer-approved quality standard.

ItemPublished supply information
Product nameDisodium EDTA Powder
Chemical nameDisodium ethylenediaminetetraacetate
Common namesEDTA disodium salt, disodium edetate, EDTA-Na₂
Ingredient functionChelating and sequestering agent
AppearanceWhite to off-white crystalline powder
Typical assay99.0–101.0% or agreed specification
Assay methodComplexometric titration or agreed analytical method
Typical particle sizeApproximately 60–100 mesh
SolubilityFreely soluble in water; not oil-soluble
Available gradesFood, cosmetic, industrial or project-specific

Published values provide a starting point for technical evaluation. The signed specification and batch-specific certificate of analysis remain the controlling documents for commercial acceptance.

Samples, technical documents and bulk supply options are available subject to project confirmation.

How Disodium EDTA Works

Disodium EDTA is a partially neutralized sodium salt of ethylenediaminetetraacetic acid. Its molecular structure can coordinate with metal ions and form stable complexes.

Iron and copper may accelerate oxidative degradation, color change and odor development. Calcium and magnesium can interfere with surfactants, contribute to mineral deposits or reduce processing consistency in hard-water systems.

By reducing the chemical availability of these ions, Disodium EDTA may support:

  • Improved color and odor stability
  • Reduced metal-catalyzed oxidation
  • Better solution clarity
  • More consistent hard-water performance
  • Improved support for a validated preservation system

Disodium EDTA is not a complete preservative or antioxidant by itself. Its performance depends on the metal load, formulation pH, concentration, addition sequence and other ingredients present.

Additional background is available in Essencefield’s guide to Disodium EDTA uses, pH, solubility and EDTA differences.

CAS Number and Hydration State

Disodium EDTA products may be described using different CAS references. Buyers should not assume that two products are equivalent based only on the words “EDTA-2Na” or a 99% assay claim.

Product identityCommonly encountered information
Disodium EDTA referenceCAS 139-33-3
Disodium EDTA dihydrate referenceCAS 6381-92-6
Dihydrate molecular weightApproximately 372.24 g/mol
Main purchasing riskAssay and molecular weight may be reported on different hydration bases

The FAO/JECFA specification for disodium EDTA describes its identity and purity criteria. The PubChem entry for disodium EDTA dihydrate identifies CAS 6381-92-6 and a molecular weight of approximately 372.24 g/mol.

Before comparing quotations, confirm:

  • CAS reference
  • Molecular formula
  • Hydration state
  • Molecular weight
  • Assay basis
  • Loss on drying or water content

This review prevents incorrect comparisons between anhydrous-equivalent results, dried-basis results and values reported for the dihydrate as supplied.

Grade and Application Selection

The correct grade is determined by the technical risk, applicable regulations and required quality evidence.

ApplicationGrade to evaluateMain riskPriority specifications
Clear cosmetic liquidCosmetic or project-specificHaze and discolorationIron, clarity and insoluble matter
Cream, lotion or cleanserCosmeticOxidation and preservation variabilityAssay, pH, iron and chelation value
Food-processing applicationFoodRegulatory noncomplianceIdentity, assay, lead and permitted use
Industrial cleanerIndustrialVariable hard-water performanceChelation value, assay and dissolution
Sensitive technical systemProject-specificIonic or metal contaminationIron, copper, chloride, sulfate and insolubles
Pharmaceutical projectNamed compendial gradeQualification failureCompendial tests, traceability and change control

Personal care formulations

Disodium EDTA is evaluated in shampoos, cleansers, creams, lotions, gels and other water-based personal care products. It can bind trace metals that may contribute to oxidation, discoloration or inconsistent preservative performance.

For clear serums and gels, iron, solution clarity and insoluble matter may be more important than headline purity. Creams and cleansers also require evaluation of final pH, water-phase dissolution and compatibility with the preservation system.

The Cosmetic Ingredient Review assessment of EDTA and its salts concluded that the assessed ingredients were safe in the cosmetic uses and concentrations covered by its review. Finished-product manufacturers remain responsible for complete formulation safety, stability and market compliance.

Food-processing applications

A food-grade description does not establish unrestricted permission for every food or country.

In the United States, 21 CFR §172.135 permits disodium EDTA only in designated foods, for specified technical functions and under prescribed conditions.

A food project should therefore confirm:

  • Exact EDTA salt
  • Food category
  • Intended technical function
  • Maximum permitted level
  • Destination market
  • Required additive standard
  • Labeling obligations

Supplier documentation supports raw-material evaluation but does not replace the finished-product manufacturer’s regulatory assessment.

Cleaning and industrial systems

Disodium EDTA can bind hardness ions and trace metals in detergent, institutional-cleaning and process-water systems.

Important purchasing parameters include:

  • Chelation value
  • Active assay
  • Dissolution behavior
  • Particle-size consistency
  • Insoluble matter
  • Iron
  • Batch-to-batch variation

For performance-driven applications, comparing the cost per unit of effective chelation capacity may be more useful than comparing price per kilogram alone.

Pharmaceutical projects

Pharmaceutical suitability must be confirmed against a named pharmacopoeial or buyer-approved specification.

High analytical purity, food-grade status or general GMP documentation does not automatically establish compliance with USP–NF, Ph. Eur., BP or another compendial requirement. Manufacturing source, analytical methods, traceability and facility documents must be reviewed for the proposed material.

Technical Specifications and COA Review

A certificate of analysis should report actual batch results against the approved specification. A document containing only “pass” statements provides limited value unless the corresponding limits and methods are available.

COA review pointBuyer should confirm
IdentityProduct name, CAS reference and hydration state
AssayBatch result and calculation basis
Loss on dryingMoisture and hydration consistency
pHResult, sample concentration and test method
Chelation valueFunctional metal-binding capacity
Critical impuritiesIron, NTA, heavy metals, chloride and sulfate
Physical consistencyParticle size, clarity and insoluble matter
Batch consistencyVariation across recent commercial batches

Assay basis

Assay can be reported:

  • As supplied
  • On a dried basis
  • As the dihydrate
  • As an anhydrous equivalent

The calculation basis must be stated before results from different suppliers can be compared accurately.

Chelation value

Chelation value measures functional metal-binding capacity. It can be particularly important in industrial cleaning, water treatment and high-mineral formulations.

Two materials with similar chemical assays may provide different process results if their chelation values, dissolution rates or impurity profiles differ.

Iron and solution clarity

Iron is important in white, transparent and oxidation-sensitive systems. Elevated iron may contribute to yellowing or accelerate oxidative reactions.

Solution clarity and insoluble matter are particularly relevant to:

  • Clear cosmetic products
  • Transparent gels
  • Liquid cleaning systems
  • Beverages where use is permitted
  • Appearance-sensitive technical solutions

NTA and ionic impurities

Nitrilotriacetic acid, or NTA, may be monitored as a process-related impurity. Chloride and sulfate may also require tighter control in corrosion-sensitive, pharmaceutical or high-purity technical applications.

The required limits should be defined by the buyer’s application and approved specification rather than copied from an unrelated grade.

Specification, typical value and batch result

These three terms should not be treated as interchangeable:

  • Specification: the approved acceptance range
  • Typical value: a reference value that is not necessarily guaranteed
  • Batch result: the measured value reported on the COA

Reviewing several recent COAs can help assess whether production results remain consistently within the agreed range.

Essencefield’s raw-material quality process covers specification review, supplier qualification, incoming inspection, batch documentation and traceability.

Choosing the Appropriate EDTA Form

EDTA acid, disodium EDTA and tetrasodium EDTA have related chelating functions but differ in neutralization, solubility and solution pH.

EDTA formMain distinctionTypical starting point
EDTA acidLower neutralization and water solubilitySystems using controlled neutralization
Disodium EDTAPartially neutralized sodium saltMildly acidic to near-neutral formulations
Tetrasodium EDTAMore alkaline sodium saltNeutral-to-alkaline formulations

Replacing disodium EDTA with tetrasodium EDTA can shift formulation pH and change the active-equivalent calculation. The proposed substitution should be tested for solubility, stability and ingredient compatibility.

Calcium disodium EDTA has a separate chemical and regulatory identity and should not be treated as a direct substitute.

Formulation Considerations

A controlled addition sequence can reduce dissolution and compatibility problems.

A practical development process is:

  1. Confirm the required grade and chemical form.
  2. Review process-water hardness and expected metal load.
  3. Pre-dissolve the material in the water phase where appropriate.
  4. Add it gradually under adequate agitation.
  5. Complete mixing before making the final pH adjustment.
  6. Validate clarity, precipitation, color and stability.
Formulation typeMain validation requirement
Clear liquidsClarity, haze, sediment and color stability
Mineral-rich systemsTotal chelation demand and precipitation
Emulsions and cleansersFinal pH and preservation compatibility
Powder blendsParticle-size compatibility and blend uniformity

A supplier’s suggested concentration should be treated as a formulation starting point. The final level must be established through compatibility, stability and performance testing.

Quality Documentation

Document requirements should be agreed before sampling or quotation because availability can vary by grade, manufacturing source and project scope.

Essencefield’s testing and documentation support may include:

  • Product specification
  • Batch-specific COA
  • Technical Data Sheet
  • Safety Data Sheet
  • Country-of-origin information
  • Allergen, GMO or irradiation statements where relevant
  • Third-party analytical reports
  • Customized impurity-testing results
  • Facility-specific certification evidence

A third-party test report applies to the submitted sample or batch. It does not automatically establish the compliance of future commercial lots.

For critical projects, buyers should confirm:

  • Test method
  • Detection or quantification limit
  • Acceptance limit
  • Laboratory identity
  • Batch number
  • Report date
  • Relationship between the tested sample and commercial supply

Packaging and Bulk Supply

Essencefield’s current published supply framework includes samples for formulation work and commercial quantities for qualified projects.

Supply itemPublished framework
Sample packagingSmall packs for R&D and qualification
Bulk inner packagingSealed polyethylene liner or moisture-barrier bag
Bulk outer packaging25 kg carton, kraft bag, fiber drum or agreed export pack
Commercial MOQTypically 25 kg
Standard lead timeUsually 7–15 business days
Typical shelf life24 months unopened
Shipping optionsCourier, air freight, sea freight or consolidated shipment

Lead time may vary according to inventory, testing, particle-size adjustment, customized impurity limits, packaging and destination documentation.

The powder should remain sealed and dry. After opening, the inner liner should be closed promptly and the material handled with clean, dry equipment to reduce moisture absorption, caking and cross-contamination.

International buyers can review Essencefield’s global supply support for information about packing, shipment documents and repeat-order planning.

Request a Sample or Bulk Quotation

A complete initial inquiry should include:

  • Intended application
  • Required grade
  • Reference specification or COA
  • Trial or commercial quantity
  • Destination country
  • Packaging preference
  • Required documents
  • Target delivery date

Additional requirements such as hydration state, chelation value, particle size, iron, NTA and solution clarity can be confirmed during technical review.

Use the Essencefield contact page to submit the project and request sample availability or a bulk quotation.

Conclusion

Disodium EDTA powder should be selected by verified chemical identity, hydration state, assay basis and application-specific specifications—not by purity and price alone.

Buyers should evaluate chelation value, critical impurities, particle characteristics, COA consistency, regulatory suitability and supply documentation before approval. Representative sample testing and an agreed specification provide the strongest basis for reliable commercial purchasing.

Request a Manufacturing Quote

Please use the form below to share your ingredient requirements—product category, target application, desired specifications (e.g., assay/ratio, mesh size, carrier), and estimated order quantity. If you need OEM/private label, include dosage form and key label claims. We’ll route your request to the right team and recommend suitable ingredients, testing/documentation options, packaging, and lead times. You’ll receive indicative pricing, MOQ, and a sample/approval plan.

Picture of Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

We publish technical guides for B2B sourcing and formulation of botanical ingredients, including typical COA/Spec ranges, risk-based testing plans, documentation, and OEM/private-label manufacturing. Content is reviewed to align with manufacturing feasibility, batch traceability, and quality control practices used for global export projects.

Reviewed By: Essencefield QA & Technical Team (Quality System)

Documents (on request): COA · TDS/Spec · SDS · Allergen/GMO statements · Regulatory declarations (market-dependent)

More Posts