Propylene Glycol Alginate Powder Technical Buying Guide

Propylene glycol alginate powder for acidic beverages, dressings, sauces and beer foam stabilization
Table of Contents

Propylene glycol alginate powder is a modified seaweed-derived hydrocolloid used for viscosity control, suspension, emulsion stability, and foam support. Also known as PGA, E405, or INS 405, it is commonly evaluated in acidic beverages, dairy-style drinks, dressings, sauces, beer, and dry premixes.

Buyers should compare PGA grades by viscosity method, application performance, purity requirements, processing behavior, and destination-market regulations—not by product name or price alone.

Essencefield supplies Propylene Glycol Alginate Powder for food, beverage, supplement, distribution, and manufacturing projects. Viscosity grade, particle size, documentation, packaging, MOQ, and lead time are confirmed according to the application and approved commercial specification.

Application note: PGA performance depends on the selected grade, finished-product pH, temperature, shear, proteins, minerals, acid type, sugar level, and order of addition. Supplier specifications should be confirmed through finished-product and pilot-scale testing.

Propylene Glycol Alginate Powder at a Glance

ItemTechnical and commercial reference
Common namesPropylene glycol alginate, PGA, alginic acid propylene glycol ester
E numberE405
INS numberINS 405
CAS number9005-37-2
SourceBrown-seaweed-derived alginate fraction
AppearanceWhite to off-white or light beige powder
Main functionsStabilizer, thickener, suspension aid, emulsifier, and foam-supporting hydrocolloid
Typical applicationsAcidic beverages, dairy-style drinks, dressings, sauces, beer, emulsions, and dry blends
Critical specificationsViscosity, test method, esterification-related parameters, particle size, moisture, purity, microbiology, and heavy metals
Typical particle sizeFine powder; 80-mesh or customized options may be evaluated
Common bulk packaging20 kg or 25 kg per unit
Typical shelf life24–36 months in sealed packaging under suitable storage conditions
Supporting documentsCOA, TDS, SDS, specification sheet, and applicable origin, allergen, GMO, gluten, vegan, and irradiation statements
MOQ and lead timeConfirmed by grade, quantity, testing, packaging, documents, and destination

These values describe Essencefield’s published supply framework. The approved product specification and batch-specific Certificate of Analysis remain the controlling documents for an individual shipment.

What Is Propylene Glycol Alginate?

Propylene glycol alginate is a partially esterified derivative of alginic acid.

The FAO/JECFA specification defines PGA as an alginic-acid ester in which some carboxyl groups are esterified with propylene glycol, some are neutralized with an appropriate alkali, and others remain free. JECFA identifies the additive as INS 405 and CAS 9005-37-2 and lists stabilizing, thickening, and emulsifying functions.

Partial esterification changes the charge distribution and interfacial behavior of the alginate molecule. This makes PGA relevant to acidic, emulsified, or foam-sensitive systems where unmodified alginate may be less suitable.

PGA is not liquid propylene glycol

Propylene glycol alginate and liquid propylene glycol are separate ingredients.

Propylene glycol is a low-molecular-weight liquid. PGA is a polymeric hydrocolloid supplied as a powder, granule, grain, or fibrous material. Confusing the two can create errors in ingredient purchasing, product identification, regulatory assessment, and label preparation.

PGA compared with sodium alginate

Sodium Alginate Powder is also derived from brown seaweed, but it is generally selected for thickening, suspension, and calcium-responsive gel formation.

PGA is more commonly evaluated when a formulation requires:

  • Greater suitability for acidic conditions
  • Emulsion support
  • Foam stabilization
  • Viscosity without strong calcium-triggered gelation
  • Performance in low-pH beverages, dressings, or sauces

Neither ingredient is universally superior. Sodium alginate is often the better choice for controlled gel formation, while PGA is more relevant to selected acidic and interface-sensitive systems.

How PGA Works

PGA combines a water-interacting polysaccharide backbone with esterified groups that influence charge density and interfacial behavior.

Its commercial functionality can be divided into three main areas.

Viscosity and suspension

Hydrated PGA increases continuous-phase viscosity and may slow the movement of suspended particles.

This can help control:

  • Sedimentation
  • Serum separation
  • Uneven product body
  • Particle migration
  • Oil-ring formation

Viscosity alone does not guarantee suspension. Particle density, particle size, yield stress, storage temperature, shear history, and interactions with other stabilizers must also be considered.

A PGA grade that produces high viscosity in water may still perform poorly in a finished beverage if hydration is incomplete or its rheological profile does not match the dispersed phase.

Emulsion support

PGA can support oil-in-water emulsions through a combination of continuous-phase viscosity and interfacial activity.

Finished emulsion stability also depends on the primary emulsifier, oil composition, homogenization, droplet size, pH, temperature, and storage conditions. PGA should not be expected to correct an emulsion created with inadequate homogenization or insufficient interfacial coverage.

Foam support

PGA has an established technical role in beer and other selected foam-sensitive beverages.

Published research indicates that beer containing PGA can show strong foam stability, but performance still depends on hydrophobic polypeptides and other foam-positive components in the beverage. PGA therefore supports an existing foam system rather than replacing the formulation and processing conditions needed to create stable foam.

Specifications That Determine Performance

A useful PGA specification must define both the acceptance limit and the analytical method.

SpecificationWhy it mattersWhat buyers should confirm
IdentityConfirms the approved ingredient and gradeIdentification method and exact grade name
AppearanceHelps detect abnormal color, contamination, or storage damageApproved visual range
ViscosityAffects body, suspension, pumping, filling, and mouthfeelComplete preparation and measurement method
Esterification-related parameterInfluences acid response and interfacial performanceMethod and application-specific target
pHSupports grade and batch comparisonSolution concentration and test method
Particle sizeAffects dust, dry blending, lumping, and hydrationSieve method and particle-size distribution
Loss on dryingInfluences active solids, caking, flowability, and shelf lifeAnalytical method and maximum value
Insoluble matterMay indicate impurities or hydration issuesReporting basis and limit
Total propylene glycolIdentity and purity parameterDry-basis method and applicable limit
Free propylene glycolResidual-purity parameterMaximum value and method
Heavy metalsSupports customer and destination-market requirementsIndividual limits and analytical methods
MicrobiologySupports hygiene and shelf-life controlActual numerical batch results

JECFA specifications include controls for loss on drying, water-insoluble matter, total and free propylene glycol, arsenic, lead, total plate count, yeast and mould, coliforms, and Salmonella.

The European Union’s Regulation (EU) No 231/2012 establishes E405 identity and purity criteria covering total and free propane-1,2-diol, insoluble matter, formaldehyde, heavy metals, and microbiological quality.

Regulatory purity requirements do not automatically form a complete commercial specification. A buyer may require tighter microbiological criteria, a defined viscosity range, controlled particle size, or application-specific performance testing.

How to compare PGA viscosity

Viscosity values are comparable only when the preparation and measurement conditions are aligned.

A complete method should identify:

  • Solution concentration
  • Water quality
  • Hydration procedure
  • Hydration time
  • Measurement temperature
  • Viscometer model
  • Spindle
  • Rotational speed
  • Sample-conditioning period

A value measured in a 1% solution cannot be directly compared with a result obtained at another concentration. Changes in temperature, water hardness, mixing, or hydration time can also produce substantial differences.

When changing suppliers, prepare the current material and candidate sample with the same internal method. Compare their solution viscosity and finished-product performance after the intended heat, shear, homogenization, or acidification process.

Higher viscosity is not automatically better. An excessively high-viscosity grade may:

  • Increase mixing energy
  • Extend hydration time
  • Reduce pourability
  • Complicate pumping or filling
  • Increase air incorporation
  • Produce an overly heavy mouthfeel

The correct grade is the material that meets the finished-product target with acceptable processing and cost-in-use.

Typical microbiological controls

Essencefield publishes the following typical PGA controls:

  • Total plate count: normally no more than 1,000 CFU/g
  • Yeast and mould: normally no more than 100 CFU/g
  • E. coli: not detected in the agreed test quantity
  • Salmonella: not detected in the agreed test quantity

Final limits are defined by the approved grade specification and batch COA. Heavy-metal requirements are set according to the customer specification and destination market.

How to Select a PGA Grade

Grade selection should begin with the finished formulation rather than a generic product description.

ApplicationMain objectivePriority validation
Acidic beverageSuspension and post-process viscositySediment, ring formation, post-heat viscosity, and storage
Acidified dairy drinkProtein and serum stabilityFlocculation, serum separation, heat stability, and mouthfeel
Salad dressingEmulsion stability and controlled pourOil separation, shear recovery, syneresis, and storage
Sauce or condimentTexture and acid-compatible suspensionFilling viscosity, cooling behavior, and separation
Beer or ciderFoam persistence and clingFoam retention, haze, filtration, and sensory impact
Beverage powderUniform blending and reconstitutionLumping, hydration time, and sediment

Provide the supplier with:

  • Finished-product pH
  • Acid type
  • Processing and filling temperatures
  • Heat-treatment conditions
  • Homogenization or shear
  • Protein and mineral content
  • Oil-phase percentage
  • Target viscosity
  • Other hydrocolloids
  • Destination market

This information helps determine the required viscosity direction, particle size, analytical method, testing scope, and document package.

Application Guide

Acidic beverages

In fruit drinks, flavored beverages, and RTD systems, PGA is commonly evaluated for suspension, body, emulsion support, and ring control.

The material should be tested after the complete manufacturing process. Pasteurization, hot filling, homogenization, acids, minerals, sweeteners, and flavor oils can alter viscosity and stability.

The most useful validation points are:

  • Post-heat viscosity
  • Sediment
  • Oil-ring formation
  • Turbidity
  • Storage stability

Published supplier guidance indicates that acidic-beverage prototypes may begin around 0.05–0.30%, followed by adjustment according to pH, solids, suspension requirements, process conditions, and sensory targets. This is a development range rather than a universal recommended dosage.

Acidified dairy drinks

Acidified dairy and high-protein beverages introduce interactions among proteins, calcium, acids, heat, and shear.

The candidate PGA grade should be tested in the actual milk or protein base rather than only in water. Evaluation should focus on:

  • Protein flocculation
  • Serum separation
  • Heat stability
  • Mouthfeel
  • Storage performance

Depending on the protein system and required stabilization mechanism, an application-specific Pectin Powder may be more suitable or may be evaluated as part of a combined hydrocolloid system. Essencefield lists HM, LM, and amidated LM pectin directions for different gelation and calcium-response requirements.

Dressings, sauces, and condiments

In acidic dressings and sauces, the objective is normally controlled flow and resistance to separation—not maximum viscosity.

PGA may support:

  • Oil-in-water emulsion stability
  • Pourability
  • Acid-compatible viscosity
  • Suspension
  • Reduced syneresis

Trials should reproduce the actual oil content, acid source, salt, sugar, solids, homogenization, cooking, cooling, and filling process.

The principal validation points are oil separation, pour behavior, viscosity after shear, syneresis, and storage stability.

Published supplier guidance suggests an early development range of approximately 0.10–0.60% for dressings and sauces. The final level should be established from application trials and verified against destination-market regulations.

Beer and foam-sensitive beverages

In beer, PGA is mainly evaluated for foam height, retention, and glass cling.

Testing should also cover:

  • Haze
  • Filtration
  • Flavor and aroma neutrality
  • Carbonation
  • Storage stability

Increasing PGA dosage should not be the first response to weak foam. The beer’s proteins, lipids, malt composition, equipment cleanliness, fermentation conditions, and processing history should also be reviewed.

Dispersion and Troubleshooting

A controlled hydration method reduces fish-eyes, incomplete dispersion, and inconsistent viscosity.

A practical starting procedure is:

  1. Charge most of the process water into the vessel.
  2. Establish complete circulation before powder addition.
  3. Pre-blend PGA with sugar, maltodextrin, or another compatible dry carrier where appropriate.
  4. Add the powder gradually into the moving liquid.
  5. Avoid depositing the full quantity in one location.
  6. Allow a defined hydration period.
  7. Add concentrated acid after initial hydration when the formulation permits.
  8. Introduce proteins, salts, oils, and other gums in the validated sequence.
  9. Adjust the batch to final weight.
  10. Condition the sample to a fixed temperature before measuring viscosity.

Troubleshooting guide

ProblemLikely causeCorrective action
Fish-eyes or lumpsAddition is too fast or circulation is inadequateSlow the addition, pre-blend the powder, or improve induction
Low viscosityIncomplete hydration or inconsistent measurementStandardize preparation, hydration, and conditioning
Excessive viscosityGrade or dosage is too highReduce the level or test a lower-viscosity grade
SedimentationInsufficient low-shear structureReview grade, dosage, particle size, or gum combination
Dairy flocculationProtein, mineral, or acidification incompatibilityChange the hydration and acid-addition sequence
Emulsion separationInadequate homogenization or emulsifier balanceReview droplet size, oil phase, and primary emulsifier
Weak foamInsufficient foam-positive componentsReview the complete beverage matrix
Batch variationMethod differences or material inconsistencyAlign methods and tighten the approved specification

PGA may be tested with pectin, xanthan gum, modified starch, gellan gum, or Sodium CMC Powder. Sodium CMC is commonly used where smooth viscosity, suspension, and water binding are priorities.

Combination trials should evaluate total gum level, hydration sequence, clarity, mouthfeel, shear response, and storage stability. Excessive synergy can cause over-thickening, stringiness, or processing difficulty.

PGA Compared With Other Hydrocolloids

HydrocolloidMain advantageKey limitation
PGAAcid-compatible viscosity, emulsion support, and foam functionalityGrade and process require application testing
Sodium alginateCalcium-responsive gelation and structured textureGreater sensitivity in some acidic or mineral-rich systems
PectinStrong performance in selected fruit and dairy systemsHighly dependent on grade, pH, calcium, and soluble solids
Sodium CMCEconomical, smooth viscosity and water bindingMay not suit every acidic protein system
Xanthan gumEfficient low-shear suspensionCan create an elastic or slimy texture
Gum arabicEffective beverage emulsification at low viscosityHigher use levels may be required for body
Gellan gumStrong suspension and gel structure at low levelsHydration and ion control can be demanding

PGA should not be selected when another hydrocolloid can meet the target more efficiently. The technically correct recommendation may be a different gum or a blended stabilizer system rather than a higher PGA dosage.

Regulatory and Safety Review

Regulatory permission depends on the target market, food category, technological function, and use level.

United States

Under 21 CFR §172.858, propylene glycol alginate may be used as an emulsifier, flavoring adjuvant, formulation aid, stabilizer, surfactant, or thickener under prescribed conditions.

Category-specific examples include:

  • Up to 0.5% in specified frozen desserts and baked goods
  • Up to 0.9% in cheese
  • Up to 0.6% in condiments and relishes
  • Up to 0.3% in applicable other foods

These figures are regulatory ceilings for defined uses, not recommended formulation levels. Buyers should review the complete regulation for the relevant food category.

European Union

In the European Union, PGA is identified as E405 propane-1,2-diol alginate.

Regulation (EU) No 231/2012 defines its identity and purity criteria. Authorization in a finished food must be checked against the applicable food category, technological function, maximum level, and labeling rules.

Codex and safety assessment

The Codex GSFA entry for INS 405 provides food-category-specific provisions for propylene glycol alginate. National legislation may differ from Codex provisions, so the destination market must be reviewed separately.

EFSA’s re-evaluation established an acceptable daily intake of 55 mg/kg body weight per day for propane-1,2-diol alginate. The ADI is a toxicological reference value, not a recommended dosage for product formulation.

Supplier Qualification and Commercial Approval

A qualified supplier should provide enough technical and batch information for the buyer to compare, approve, and routinely control the material.

Essencefield’s raw-material quality process connects supplier qualification, specification confirmation, COA verification, incoming inspection, material release, and batch traceability.

Documents to request

The supplier-approval package should include:

  • Current product specification
  • Batch-specific COA
  • Complete viscosity method
  • TDS
  • SDS
  • Manufacturing-origin information
  • Allergen and GMO statements
  • Packaging specification
  • Shelf-life statement
  • Relevant certification documents
  • Change-notification procedure

Essencefield’s testing and certification support covers specification review, batch COAs, TDSs, SDSs, third-party laboratory reports, and facility- or product-specific certification documents. Availability depends on the material source, production site, test scope, and target market.

COA review

A batch COA should identify:

  • Exact product and grade
  • Batch number
  • Manufacturing, expiry, or retest date
  • Specification limits
  • Actual numerical results
  • Analytical methods or references
  • Quality authorization

Confirm that the viscosity method matches the approved specification and that the batch number on the COA matches the product labels.

Sample-to-commercial approval

Use a six-stage approval process:

  1. Define the application and required specification.
  2. Approve the supplier and technical documents.
  3. Test the sample with a standardized method.
  4. Validate the finished formulation and production process.
  5. Approve a normal commercial lot.
  6. Establish routine incoming QC and retain-sample procedures.

Essencefield’s project workflow connects requirement review, technical evaluation, commercial confirmation, sampling, pilot approval, production release, and delivery planning. MOQ, testing, packaging, and lead time are confirmed after the technical and commercial scope is agreed.

Packaging, storage, MOQ, and lead time

Essencefield typically supplies PGA with a moisture-protective inner liner and an outer fiber drum, carton, or kraft paper bag. Common bulk sizes are 20 kg and 25 kg, with a typical published shelf life of 24–36 months under sealed, dry storage conditions.

Store the powder:

  • Sealed
  • In a cool, dry, ventilated area
  • Protected from humidity
  • Away from direct sunlight and strong odors
  • Away from excessive heat

MOQ and lead time are project-specific. They depend on viscosity grade, quantity, testing, customized specifications, packaging, documentation, and destination market.

RFQ Checklist

Include the following information when requesting a quotation:

Product: Propylene Glycol Alginate Powder
Application:
Target market:
Finished-product pH:
Processing temperature:
Target function:
Target viscosity:
Protein, mineral, or oil content:
Other hydrocolloids:
Required documents:
Trial quantity:
Annual demand:
Destination:

A complete project brief allows the supplier to review grade suitability, testing, sample availability, packaging, MOQ, and estimated lead time.

Final Procurement Recommendation

Propylene glycol alginate powder should be purchased as an application-specific hydrocolloid rather than an interchangeable commodity.

The final decision should connect:

  1. Finished-product function
  2. Viscosity grade and test method
  3. Esterification-related requirements
  4. Hydration and processing behavior
  5. Regulatory suitability
  6. Commercial-batch consistency
  7. Packaging and supply conditions

Review the current PGA product information and contact Essencefield with your application, target market, required quantity, and document checklist to request a specification, representative COA, sample arrangement, packaging details, MOQ, and lead time.

Request a Manufacturing Quote

Please use the form below to share your ingredient requirements—product category, target application, desired specifications (e.g., assay/ratio, mesh size, carrier), and estimated order quantity. If you need OEM/private label, include dosage form and key label claims. We’ll route your request to the right team and recommend suitable ingredients, testing/documentation options, packaging, and lead times. You’ll receive indicative pricing, MOQ, and a sample/approval plan.

Picture of Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

We publish technical guides for B2B sourcing and formulation of botanical ingredients, including typical COA/Spec ranges, risk-based testing plans, documentation, and OEM/private-label manufacturing. Content is reviewed to align with manufacturing feasibility, batch traceability, and quality control practices used for global export projects.

Reviewed By: Essencefield QA & Technical Team (Quality System)

Documents (on request): COA · TDS/Spec · SDS · Allergen/GMO statements · Regulatory declarations (market-dependent)

More Posts