Propylparaben Powder Specifications and Bulk Sourcing

White crystalline propylparaben powder CAS 94-13-3 prepared for specification, COA, and bulk supplier evaluation
Table of Contents

Propylparaben powder is a crystalline antimicrobial preservative used in selected cosmetic, pharmaceutical, and legally permitted food applications. Before commercial approval, buyers should evaluate its analytical specification, dissolution behavior, destination-market status, batch documentation, and supplier traceability.

The material is not freely soluble in water, so formulation performance cannot be predicted from assay alone. A suitable product must meet the approved quality standard and remain physically stable in the intended solvent system, manufacturing process, and finished formulation.

Propylparaben Powder Buyer Summary

ItemTypical supply reference
Chemical namePropyl 4-hydroxybenzoate
CAS number94-13-3
Primary functionAntimicrobial preservative
Typical assay≥99.0% by HPLC
AppearanceWhite to off-white crystalline powder
CarrierCarrier-free unless a custom blend is agreed
Typical particle size80 mesh
Water solubilitySlightly soluble
Main formulation riskIncomplete dissolution or recrystallization
Core quality documentsSpecification, COA, TDS and SDS

Essencefield publishes a typical HPLC assay of at least 99.0%, an 80-mesh standard option, and project-specific controls for impurities, particle-size distribution, residual solvents, microbiology, and heavy metals. The final release standard should be confirmed through the current Propylparaben Powder specification and batch COA.

Chemical Identity and Product Form

Propylparaben is the propyl ester of 4-hydroxybenzoic acid. It may also appear in technical documents as propyl p-hydroxybenzoate, propyl 4-hydroxybenzoate, CAS 94-13-3, or the historical designation E216.

The chemical form must be stated clearly because propylparaben is not interchangeable with sodium propylparaben. The sodium salt has a different molecular weight, assay basis, solubility profile, and effect on formulation pH.

Substituting one form for another may change:

  • The quantity of active paraben delivered
  • Dissolution behavior
  • Final pH
  • Ingredient labeling
  • Regulatory documentation
  • Approved test methods

Buyers evaluating the salt form can review the related Sodium Parabens Compound Powder guide.

A purchase specification should identify the exact chemical name, CAS number, required grade, assay method, impurity limits, particle-size requirement, approved source, and specification version.

Propylparaben Powder Specifications and COA Review

A headline purity value does not establish full product equivalence. Two materials promoted as “99% propylparaben powder” may use different analytical methods, assay bases, impurity limits, particle-size controls, or manufacturing sources.

A risk-based specification may include the following parameters:

Test parameterTypical control or purpose
AppearanceWhite to off-white crystalline powder
IdentificationFTIR and/or HPLC retention comparison
AssayTypically ≥99.0% by HPLC
Related substancesIndividual and total impurities controlled
Loss on dryingTypically ≤0.5%, subject to specification
Melting rangeSupports identity and crystallization consistency
Residue on ignitionControlled where required
Particle sizeCommonly 80 mesh
PSDD10/D50/D90 available for controlled-particle projects
Residual solventsGC testing available where required
Microbiological limitsDefined according to application and grade
Heavy metalsControlled according to the approved specification
Solubility checkSolvent-phase clarity or time-to-clear evaluation

Not every test is required for every project. The final panel should reflect the intended application, exposure route, destination market, applicable monograph, and customer risk assessment.

Compare assay results on the same basis

An assay result should state whether it is reported:

  • As received
  • On a dried basis
  • On an anhydrous basis
  • Against a pharmacopoeial method
  • Against an internal validated method

Results generated on different bases should not be treated as directly equivalent.

The COA should link the delivered lot to the approved specification, test methods, numerical results, manufacturing or test dates, retest or expiry information, and authorized release.

Numerical reporting is especially useful for assay, moisture, and impurities. A result recorded only as “Conforms” may confirm acceptance but does not support meaningful batch-to-batch trend analysis.

Incoming material approval

Essencefield’s published raw material quality process follows six connected stages:

Supplier Qualification → Specification Approval → COA Review → Incoming Inspection → Material Release → Batch Traceability

Incoming review can include source confirmation, packaging and label inspection, COA comparison, physical checks, internal testing, or coordinated third-party verification.

For repeat orders, quality teams should trend critical parameters across several commercial batches. Useful indicators include assay, related substances, loss on drying, particle-size distribution, and solvent-phase clarity.

Solubility and Formulation Performance

Propylparaben powder is only slightly soluble in water. It is therefore commonly evaluated through a compatible alcohol, glycol, or mixed-solvent premix rather than being added directly to cold water.

Poor incorporation may produce:

  • Undissolved particles
  • Haze in transparent products
  • Delayed crystal formation
  • Sedimentation after cooling
  • Uneven preservative distribution
  • Filter blockage
  • Reduced available concentration
  • Stability-test failure

A premix that appears clear while warm may crystallize after cooling. Visual clarity immediately after processing does not prove that the formula will remain physically stable throughout its shelf life.

Define the incorporation process before scale-up

A formulation study should establish:

  1. Solvent system and propylparaben concentration
  2. Premix temperature
  3. Addition sequence and mixing conditions
  4. Finished-product pH
  5. Cooling profile
  6. Hold and storage conditions
  7. Preservative recovery after processing

These parameters should be reproduced during pilot and commercial production.

Particle size affects dissolution and handling

Smaller particles can increase the available surface area and may shorten dissolution time. However, finer powder can also increase dusting, electrostatic behavior, poor flow, and segregation risk.

The standard 80-mesh option may suit general applications, while a PSD-controlled material can be considered for clear systems, low-dose blends, automated dosing, or processes requiring more consistent time-to-clear performance. Essencefield lists PSD reporting and solvent-phase clarity evaluation among its available project-specific controls.

Raw-material approval does not prove preservation efficacy

A passing propylparaben COA confirms the tested quality attributes of the ingredient batch. It does not prove that the finished product will resist microbial contamination.

Preservation performance can also be affected by:

  • Product pH and water activity
  • Oil and water phase distribution
  • Surfactants and emulsifiers
  • Preservative binding
  • Raw-material bioburden
  • Manufacturing hygiene
  • Packaging design
  • Consumer use conditions

For cosmetics, ISO 11930:2019 specifies a procedure for interpreting preservation-efficacy testing and microbiological risk assessment.

For applicable pharmaceutical products, USP General Chapter <51> addresses antimicrobial effectiveness testing for preserved aqueous products.

Application Fit

Cosmetics and personal care

Propylparaben may be evaluated in legally permitted creams, lotions, shampoos, body washes, gels, toners, wet-wipe solutions, and hydroalcoholic systems.

Clear gels and toners require close monitoring for delayed crystallization. Emulsions require evaluation of pH, phase partitioning, viscosity, fragrance interaction, and storage stability. Wet-wipe systems should also be tested with the nonwoven material and final package.

FDA describes parabens as preservatives used to help prevent harmful bacterial and mold growth. It also notes that multiple parabens or other preservative types may be combined to provide broader microbial protection.

Pharmaceutical applications

Propylparaben may be considered as an antimicrobial excipient in suitable pharmaceutical products. The proposed material must match the required pharmacopoeia, dosage form, route of administration, approved formulation, and finished-product control strategy.

A general “pharmaceutical grade” description is not sufficient. Procurement teams should identify the precise USP–NF, BP, Ph. Eur., or customer specification used for batch release.

Food applications

Food use must be reviewed by destination market and product category before formulation begins. Physical suitability or an historical E-number does not demonstrate current legal authorization.

Regulatory Status by Market

Regulatory information reviewed: July 31, 2026

Market and applicationCurrent positionRequired buyer action
U.S. cosmeticsOrdinary cosmetic ingredients other than color additives generally do not need FDA premarket approvalAvoid unsupported “FDA-approved” claims
U.S. food—federalListed in 21 CFR 184.1670 as an antimicrobial agent under cGMPConfirm product category, concentration, labeling, and current review status
FDA scientific assessmentPropylparaben remains listed for scientific assessmentMonitor FDA updates before new food approvals
California foodProhibited beginning January 1, 2027Exclude from foods intended for California commerce
EU cosmeticsSCCS concluded use is safe up to 0.14% under assessed conditionsConfirm current Annex V limits and calculation basis
EU foodE216 and E217 are no longer permitted food additivesDo not rely on historical E-number claims
PharmaceuticalsStatus depends on monograph, dosage form, route, and authorizationConduct product-specific regulatory review

United States food

The current 21 CFR 184.1670 identifies propylparaben as propyl p-hydroxybenzoate and lists it as an antimicrobial agent. The provision states that current good manufacturing practice results in a maximum level of 0.1% in food.

This federal provision should not be read as unrestricted authorization for every food product. FDA currently lists propylparaben as a food ingredient and food-contact substance under scientific assessment and states that it evaluates information as it becomes available.

California’s AB 418 prohibits foods containing propylparaben from being manufactured, sold, delivered, distributed, held, or offered for sale in the state beginning January 1, 2027.

United States cosmetics

FDA states that cosmetic products and ingredients, apart from color additives, generally do not require agency approval before marketing. Finished cosmetics must still be safe under labeled or customary conditions and must not be adulterated or misbranded.

Supplier or brand content should therefore avoid describing ordinary cosmetic propylparaben as “FDA-approved.”

European Union

The European Commission’s Scientific Committee on Consumer Safety concluded that propylparaben is safe as a cosmetic preservative at concentrations up to 0.14% under the conditions assessed. Final formulation approval should still consider the current Annex V wording, expression as acid, combination limits, and product-category restrictions.

For food applications, Commission Directive 2006/129/EC states that E216 propyl p-hydroxybenzoate and E217 sodium propyl p-hydroxybenzoate are no longer permitted as food additives.

Supplier Qualification and Documentation

A bulk supplier should be evaluated for technical fit, quality controls, document accuracy, change management, and repeat-order consistency.

Qualification areaBuyer question
Manufacturing sourceIs the original producer and production site identifiable?
SpecificationDoes the proposed grade match the intended application?
Test methodsAre methods compendial, validated, or otherwise suitable?
TraceabilityCan each delivered lot be linked to its source and records?
Change controlWill significant source or process changes be communicated?
Batch consistencyCan representative COAs from several lots be reviewed?
Complaint handlingIs there a documented investigation process?
Testing supportCan independent verification be coordinated?
Supply continuityCan repeat orders be supported under the same specification?

Essencefield’s testing and certification support covers COA, TDS, SDS, specifications, coordinated third-party testing, and facility-specific certification review. Document and testing scope is confirmed according to the material source, application, and project requirements.

A buyer document package may include:

  • Batch-specific COA
  • Technical Data Sheet
  • Safety Data Sheet
  • Product specification
  • Country-of-origin statement
  • Allergen or GMO statements
  • Residual-solvent information
  • Third-party test report
  • Facility-specific certificates where applicable

Certificates and declarations should be checked against the exact product, manufacturer, facility, and commercial batch rather than assumed to apply across an entire supplier portfolio.

Bulk Supply from Essencefield

The currently published commercial arrangement includes:

Supply itemTypical arrangement
Bulk packagingDouble polyethylene liners with a 25 kg fiber drum or carton/drum
MOQTypically 25 kg
SamplesAvailable for formulation and supplier qualification
Lead timeCommonly 7–15 business days
Shelf lifeTypically 24 months unopened
DocumentsCOA, TDS, SDS, specification and project-dependent statements

Commercial terms may vary with stock, custom particle-size requirements, extended testing, order quantity, and destination.

Essencefield’s global supply support also covers pre-order document checks, export packing, batch identification, shipment coordination, and repeat-order planning.

A complete RFQ should state:

  • Application and destination market
  • Required grade, monograph, and specification
  • Assay, impurity, and particle-size requirements
  • Solvent system, pH, and process temperature
  • Sample quantity and estimated annual volume
  • Packaging and delivery location
  • Required documents, tests, and delivery date

Final Procurement Assessment

A suitable propylparaben powder should meet the approved analytical specification, remain physically stable in the intended formulation, comply with the destination market, and be supported by traceable batch documentation.

Before commercial approval, request the current specification, representative COA, and evaluation sample. Formulation trials should confirm dissolution, cooling stability, preservative recovery, and finished-product antimicrobial protection.

Submit project requirements through the Essencefield contact page or email info@essencefield.com to discuss samples, documentation, packaging, and bulk supply.

Regulatory notice: Requirements vary by jurisdiction, concentration, application, product category, and effective date. This article supports technical and procurement evaluation but does not replace product-specific legal, safety, or regulatory review.

Request a Manufacturing Quote

Please use the form below to share your ingredient requirements—product category, target application, desired specifications (e.g., assay/ratio, mesh size, carrier), and estimated order quantity. If you need OEM/private label, include dosage form and key label claims. We’ll route your request to the right team and recommend suitable ingredients, testing/documentation options, packaging, and lead times. You’ll receive indicative pricing, MOQ, and a sample/approval plan.

Picture of Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

Essencefield Editorial Team | Ingredient Science, Quality & OEM Manufacturing

We publish technical guides for B2B sourcing and formulation of botanical ingredients, including typical COA/Spec ranges, risk-based testing plans, documentation, and OEM/private-label manufacturing. Content is reviewed to align with manufacturing feasibility, batch traceability, and quality control practices used for global export projects.

Reviewed By: Essencefield QA & Technical Team (Quality System)

Documents (on request): COA · TDS/Spec · SDS · Allergen/GMO statements · Regulatory declarations (market-dependent)

More Posts